thanks albert... Cause i bought secondhand from sm1 in alphanatics.com I din realise the manual is in chinese/korean until i want to study it in detail..

Ok i hv try your steps.. but i still couldnt make my F42 to fire..

I set my A700 to Wireless Flash.

I set my F58 to Wireless Flash. Manual/ TTL (doesnt matter right?) I follow your steps. Press the Fn button. Change F58 to CTRL. ON the Ratio.. Set the ratio to 1: 1 . Channel 1.

I set my F42 to Mode WL Ch1, Level Auto, Zoom Auto.


Should be set to go.. But when I try to focus that time.... The F58 setting Change back from CTRL to RMT again by itself.. and F42 doesnt fire... I must have miss out something

Interesting roundup for Toy Photographers - http://www.hongkiat.com/blog/40-brilliant-...re-photography/

guys, a noob/precautionary question,

When i'm in a car, will those vibrations n shocks from irregular road surfaces cause any damages to my camera?

while on the topic of flash, do you guys experience that if you use your flash alot, it tends to loosen?

I doubt that i use my flash more then you guys, because now my cam is starting to collect dust, but i wanted to use flash last night, and i realize that its abit shaky.. and when tilted at an angle, it doesnt detect the flash sitting on top of the cam..

do i need to replace anything?

pro flash user? alot indoor pic?

yeah, that's what i meant..that is why when he say recycle time is much faster, i tend to think that the smaller powered flash is not sufficient, else at same power(1/1 of F58 not = 1/1 F42), it should be the same la...

i know strobe can do those things, but i dun see how i can apply it in pics la hahah most of the time also ugly ones

---

Added on February 23, 2010, 9:38 pmprovided u are not knocking it against hard items, i bet it should be fine...else we should even run with it

This post has been edited by Sp00kY: Feb 23 2010, 09:38 PM

not sure bout the shaky part.. but since u didnt use ur flash a lot, maybe the contact is dirty.. that's why sometimes the camera cannot detect the flash.. try to clean the contact and see if it still happen..

kevinwcw: lol, nahh.. more like experimental flash =).. i take acheww as my sifuu

sig: the contact is fine, its more of like, goyang2 and if u tilt ur cam shooting down wards, you can hear the flash tilting also.. then like that u know the contact is not there.. will the legs become loose after using it too much?

My first Macro Shot ..

wow~~ share exif~~ my opinion is the DOF a little small. bigger until can c the whole insect clearly should b nice....i guess..

nice... what weapon u use?

Let me guess. 70300G + raynox? XD

Naisss. Could've creep a little more closer for extra macrolicious.

This post has been edited by Uzumaki NaruTo: Feb 23 2010, 09:59 PM

bro..

can i use the same settings for my F56 & F58? been trying couple of times to set it but failed. i only able to do the WL settings for one flash.

thank u

Newbie here, Pls C&C kuat kuat..

This post has been edited by noellee69: Feb 23 2010, 10:11 PM

show some urs...70300G + rynox

---

Added on February 23, 2010, 9:38 pm
provided u are not knocking it against hard items, i bet it should be fine...else we should even run with it

[/quote]
hmm, i guess u're rite. But at a certain situation, even myself can't resist the road condition I wonder how the camera gotto deal with it...especially the sensor

Thanks ! macro is tough
will definately give another try later , but tis time w alien flash gun ready

Thanks ..



TQ bro .. hv to practice more n more ..

This post has been edited by noprob: Feb 23 2010, 10:48 PM

same problem like me...the flash will be a bit wobbly...b4 dis did encountered the flash not detecting by the body...just clean the contact point and its all done...

just hate that when we mount the flash,the flash wont sit firmly...scared like it would fall off....