Last time me also. Want to unlock den flash.
Mana tau salah. Board spoilt.

-pWs-

Ya lo. Kinda regret didn't read the manual

Anyway, anyone know where I can find DFI ddr3 mobo?

Just did a push-pull on my CCF, an easy 4C drop for me Priming at 3.85 GHz right now, temps at 55C according to CoreTemp.

My Biostar board can't raise the voltage past 1.5V; any more than that and it would BSOD on boot.

saw few ppl edi dare to put 1.5vcore using biostar...
mebbe im too scared

urs unlocked or not naw?



307HTT passed for 1hr 30mins..
now priming for 315htt...hope it passed also...
this proc limits to ~3.4ghz <1.4vcore.....
i wish i have the same as TS...

Hmm..i see..so it max out 3.5 huh.Any chance on 1.5vCore?Try la
Maybe you should try overclocking it Single Core instead

Can unlock to X3, but not with Biostar. I need that core select function which Asus and MSI have to unlock. My board's limiting the voltage, dropped the CPU-NB to stock speeds and voltages and CPU now can go over 1.5V. Just make sure to sink those FETs kuntawakaw

so far im about to stable it 3.7 but with vcore btween 1.47~1.44...kindda high...
later if room im about to rent have ekon then ill dare to put 1.5vcore..
now kindda afraid mobo die since i have no spare money to buy new...(Eventho 80mm fan spinning just on top of the mosfets heatsink)
single core? later.single core means no games for my lil bro (OC takes time in night...day time use play games..with same setting-just like burn in perhaps)

kekeke..
i have no balls sir...use think fat stock heatsink only...since i can just put fan on top of it without tie/mod/hang the fan...non-stock heatsink sure need to hang the fan one

This post has been edited by kuntawakaw: Nov 29 2009, 02:20 AM

haha..if cannot nevermind lor.Try find some timing,im eager to know Single Core overclocking potential too ~.~

Anyone here uses the AMD retention kit from Prolimatech for their heatsink???

Does any production from other companies has the same design as the prolimatech? I wouldnt want the one from Xigmatek as it is only designed exclusive to work with their HS only

I read around and it says that the retention kits wobbles when the HS is not yet fix?

Got pix?? real ones not press pictures

320HTT passed.322HTT the proc cant unlock..it stays as locked..anyone have the same issue with me...ah_khoo...do u? need tips from u guys yo

Gigabyte MA770T-UD3P bios can unlock cores ar??
i wan 1 which is able to unlock cores...
about the chip unlockable tat's my luck then...

hi guys...

thinking of giving my 5200+ Brisbane some oc...

currently at 235MHz, dropped HT to x4, and RAM at 667MHz config...

at this config, it can boot, load windows, but would auto restart, so want to give it a mild electric shock (aka increase vcore)

but the oc menu of my mobo (Biostar TA790GX XE) is pretty confusing... on 1 hand it has the "CPU FID/VID Control", where i can set the CPU voltage between (and inclusive of) 0.800V to 1.350V, and a "Voltage Configuration:, which gives the option of "CPU Overvoltage", allowing of small increment of voltage, each step is +0.012V...

so which one should i go for first???

just use the cpu fid first..
later if need more voltage can use additional cpu overvoltage..
that thing iinm can undervolt also..

CPU FID/VID control allow you to move the volt in high interval, once you try to find more precise in volt that's the function of CPU overvoltage. (the increment so little)

Tweak it according ur need.

Talking about FID.Whats the differences between VID and FID?Anyone care to explain?

FID - Frequency ID
VID - Voltage ID

so fid for cpu multiplier
voltage for err.. cpu voltage

those stand for default value for cpu for the mobo to adjust accordingly..

so wat's the normal voltage of a Brissy???

1.325V???

---

Added on November 29, 2009, 1:22 pmi see on AMD's product page, it writes 1.325V/1.350V/1.375V...

This post has been edited by astria: Nov 29 2009, 01:22 PM

can't tell exactly.. around that.. but last time mine can boot below 1.3v..

can i use the settings in AMD OverDrive as a gauge??? it says 1.3V...

but a check at CPU-Z shows it fluctuates from 1.31V to 1.344V when running at 2.7GHz...

can.. it could be ur default voltage.. 1.325 maybe can hit 3ghz already..
that fluctuations maybe becoz of the mobo..