Outline ·
[ Standard ] ·
Linear+
AMD® Socket AM2&AM3 Overclocking V20, The times moves on..Can AMD Survive?...
|
uzer85
|
 Nov 27 2009, 03:47 PM
|
|
QUOTE(bobiac @ Nov 27 2009, 07:28 AM) bro try adjust the htt more. could go more with that vcore. haha. btw good luck.  definitely need 1.45v for 3.6ghz, below that the legendary blue screen will appear when stressing~  will try up the HTT, but with this mobo. saya agak takot~  QUOTE(ah_khoo @ Nov 27 2009, 12:16 PM) if ur not contented w/ stock vcore then what bout ppl here? make full use of d c3 chip, i'm dyin to see our very own lyn member to do a 4ghz prime stable...  Selamat Hari Raya Aidiladha to all muslim bros here...  my dream too~  but seem impossible with this SUPER GREAT mobo.  |
|
|
|
|
|
TSAMDAthlon
|
Nov 27 2009, 03:49 PM
|
|
|
QUOTE(uzer85 @ Nov 27 2009, 03:47 PM) definitely need 1.45v for 3.6ghz, below that the legendary blue screen will appear when stressing~ will try up the HTT, but with this mobo. saya agak takot~ my dream too~ but seem impossible with this SUPER GREAT mobo. Apa lu takut?Takut BOOM kah?  Dont worry,as far as i know increasing high HTT wont cause any problems except require to reset CMOS  Try to push it more.Either High HTT or high multi.If me,i would stay the HTT at 200 and try highest multi i could get. This post has been edited by AMDAthlon: Nov 27 2009, 03:51 PM |
|
|
|
|
|
uzer85
|
Nov 27 2009, 03:57 PM
|
|
|
QUOTE(AMDAthlon @ Nov 27 2009, 03:49 PM) Apa lu takut?Takut BOOM kah? Dont worry,as far as i know increasing high HTT wont cause any problems except require to reset CMOS Try to push it more.Either High HTT or high multi.If me,i would stay the HTT at 200 and try highest multi i could get. ya. takot KABOOM! hahaha ok, will try with higher multi first, see how it goes.  |
|
|
|
|
|
kuntawakaw
|
Nov 27 2009, 04:15 PM
|
|
|
@AMDAthlon
what batch of ur unlocked smpron @3.7ghz?
my board quite hard to pull high HTT...argh
|
|
|
|
|
|
TSAMDAthlon
|
Nov 27 2009, 04:35 PM
|
|
|
I forgot already.That processor i already gave my sister ~.~
Now using Rana.
|
|
|
|
|
|
kuntawakaw
|
Nov 27 2009, 04:56 PM
|
|
|
QUOTE(AMDAthlon @ Nov 27 2009, 04:35 PM) I forgot already.That processor i already gave my sister ~.~ Now using Rana. max stable oc with that?may i know that |
|
|
|
|
|
Dura-Ace
|
Nov 27 2009, 05:45 PM
|
|
|
QUOTE(cloudwan @ Nov 27 2009, 01:17 AM) no la mine is platinum edt lor.. dont poison me about ram la.. y not u guys poison me the cooler? come2!  |
|
|
|
|
|
kr898
|
Nov 27 2009, 05:47 PM
|
Getting Started
|
QUOTE(AMDAthlon @ Nov 27 2009, 07:32 AM) Can post your CPUZ CPU and Memory Tab Screenies? Your proc still can be pushed even it is stock VCore/Cooling.  here is what i got... This post has been edited by kr898: Nov 27 2009, 05:52 PM |
|
|
|
|
|
antonio
|
Nov 27 2009, 05:49 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(Sib @ Nov 27 2009, 10:34 AM) priming failed miserably @3.9 ~ 4.0GHz  but still on stock vcore tho... will pump more juice after this i guess  Two or four cores?? QUOTE(uzer85 @ Nov 27 2009, 03:47 PM) definitely need 1.45v for 3.6ghz, below that the legendary blue screen will appear when stressing~ Warrghhh...such high volts just for 3.6??? Mine B50 pun just 1.4v (tested with DMM) can prime stable 12hours at 3.5ghz with 2k HTT and CPU-NB QUOTE(uzer85 @ Nov 27 2009, 03:57 PM) ya. takot KABOOM! hahaha ok, will try with higher multi first, see how it goes. Apa ada hal....kasi 1 to 1 sudahh...wakakakaka.... |
|
|
|
|
|
uzer85
|
Nov 27 2009, 06:06 PM
|
|
|
QUOTE(antonio @ Nov 27 2009, 05:49 PM) Two or four cores?? Warrghhh...such high volts just for 3.6??? Mine B50 pun just 1.4v (tested with DMM) can prime stable 12hours at 3.5ghz with 2k HTT and CPU-NB Apa ada hal....kasi 1 to 1 sudahh...wakakakaka.... yup. 1.45v is definite volt. kalo lower, boleh boot tp screen biru akan kluar bile stressing. 1 to 1?? betol gak, sementara 1st weeks nie 1 to 1. baik aku hentam tgk~ |
|
|
|
|
|
TSAMDAthlon
|
Nov 27 2009, 06:11 PM
|
|
|
QUOTE(kuntawakaw @ Nov 27 2009, 04:56 PM) max stable oc with that?may i know that Which 1?Sempron or Rana? Both Max stable 3.9Ghz.But i dont post here becos the volts too high with little clock bumps.So i just put it 3.7Ghz QUOTE(kr898 @ Nov 27 2009, 05:47 PM) here is what i got... Lower down your HT link and NB Frequency and your RAM frequency.We are finding highest clock here. Reduce the HT Link and NB Freq Below 2000Mhz |
|
|
|
|
|
kuntawakaw
|
Nov 27 2009, 06:17 PM
|
|
|
QUOTE(AMDAthlon @ Nov 27 2009, 06:11 PM) Which 1?Sempron or Rana? Both Max stable 3.9Ghz.But i dont post here becos the volts too high with little clock bumps.So i just put it 3.7Ghz regor.. owh wai...3.9ghz i only able to get 3.4 now.. donno which is the culprit..mobo not capable high HTT oc perhaps... okeh..thanks TS |
|
|
|
|
|
antonio
|
Nov 27 2009, 06:20 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(uzer85 @ Nov 27 2009, 06:06 PM) yup. 1.45v is definite volt. kalo lower, boleh boot tp screen biru akan kluar bile stressing. 1 to 1?? betol gak, sementara 1st weeks nie 1 to 1. baik aku hentam tgk~ Try 200 BCLK ler...jgn up HTT dulu... See if that can require less volts...  Klu mobo kong kasi tukar sudahhh |
|
|
|
|
|
kr898
|
Nov 27 2009, 06:31 PM
|
Getting Started
|
QUOTE(AMDAthlon @ Nov 27 2009, 06:11 PM) Lower down your HT link and NB Frequency and your RAM frequency.We are finding highest clock here. Reduce the HT Link and NB Freq Below 2000Mhz so... i lower it back down to 200mhz, and up multiplier? |
|
|
|
|
|
TSAMDAthlon
|
Nov 27 2009, 06:32 PM
|
|
|
Lower it more.I suggest you stay at 200 HTT,lower your HT link and NB Freq,and then up multiplier slowly.
|
|
|
|
|
|
kr898
|
Nov 27 2009, 06:50 PM
|
Getting Started
|
i'm on 200mhz, multiplier X14, HT link is at 1800. but... i cant decrease NB Freq... =/
so do i do like that?
1) higher multiplier by 1.0
2) log into windows
3) run OCCT Auto test
then repeat step 1,2,3 again till blue screen?
|
|
|
|
|
|
antonio
|
Nov 27 2009, 07:20 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(kr898 @ Nov 27 2009, 06:50 PM) i'm on 200mhz, multiplier X14, HT link is at 1800. but... i cant decrease NB Freq... =/ so do i do like that? 1) higher multiplier by 1.0 2) log into windows 3) run OCCT Auto test then repeat step 1,2,3 again till blue screen? Nevermind thinking about the NB Freq as with 200mhz, it will be at 2000mhz, if the multiplier is at 10x yap...continue to do like the steps u've mentioned...  |
|
|
|
|
|
kr898
|
Nov 27 2009, 08:00 PM
|
Getting Started
|
QUOTE(antonio @ Nov 27 2009, 07:20 PM) Nevermind thinking about the NB Freq as with 200mhz, it will be at 2000mhz, if the multiplier is at 10x yap...continue to do like the steps u've mentioned... okay... how much should i lower HT link? and i dont see any thing to lower NB Freq... |
|
|
|
|
|
antonio
|
Nov 27 2009, 08:28 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(kr898 @ Nov 27 2009, 08:00 PM) okay... how much should i lower HT link? and i dont see any thing to lower NB Freq... 2000mhz should be ok  |
|
|
|
|
|
BuckRoger
|
Nov 27 2009, 08:59 PM
|
|
|
hmmmm. im kinda missed my 550 be
|
|
|
|
|
Quote
0.0281sec
1.13
6 queries
GZIP Disabled