dual plane board? means there is older one la? so kit kit selling the dual plane or what? sorry..imma noob on this..
seems like u recommend me to go to this board..500 +kvr is still wthin my budget...
haiya.. the bios is AMI right?

edit:can clarify KVR and this corsair ram which better

This post has been edited by kuntawakaw: Jul 20 2009, 02:58 PM

@ah_khoo
u using biostar TA790GX a3+ ?

dual plane = those boards w/ 4 + 1 pwm = generally newer boards from biostar = 790gxe 128m + 790gx a3+ are 2 of 'em.

to go for it or not really depend on ya moolah, RM500+ is just nice for a 790gx a3+ and a pair of kvr (2nd hand preferred) provided kit_kit still have stock coz i asked him/her few days back he/she mentioned that d stock available was few piece only after that d price will go back to RM37x/38x...

there are only few board manufacturers use award bios, dfi, giga & jetway iirc...

@ amdhunter,

yup, 790gx a3+.

This post has been edited by ah_khoo: Jul 20 2009, 02:58 PM

@ah_khoo
Same model with me
Btw,u using what bios?

doesn't really matter coz we're not usin d same chip. i'm on 04/29/09 official bios as per my ss.

just get my board to rma...replaced 1 new to me cz oni 1day old...

nw nt dare to unlock 4th core....mayb free oni try to flash biios...

nw using stock bios .......080014 25/03/2009....

@bro kunta lets go for am3....rock rock hav the stock below 400....at lowyat cheaper at viewnet aso nd 400....

did ordered one from kit_kit..
er... is the ta790gx a3 comes in two version? one with mosfets cooler and another w/o mosfet heatsink + all 4 orange color ramslots
is that so?

i tink on the matket all is TA790GX A3+ 5.x


i tink 5.x is the latest d...

i din order from kit kit...coz i cant wait ...haha
thn yday go buy at viewnet...

make sure u got white box for biostar model
don't know if it's true or not... what i saw, there is another version (red box) maybe, have problem with official bios.. i seen on cloudwan's case.. and another once can't remember

if wrong, forgive me

got like tat ha ?
mine white box

could those from china/taiwan? never see one in sgp thou, it's all white box over here...

btw, a 'lil update, d board and / or ram sure take time to warm up coz i was havin headache gettin 'em stable > 1 hours yesterday but today they show some improvements which is comfortin...



This post has been edited by ah_khoo: Jul 20 2009, 09:57 PM

using KVR right sis?
gang and 1t can stable? also at CL7... im getting this ram too la...since the OCZ platinum is rated 1.8vdimm..haish..
what is the max u able to obtain? is this it?

y i saw ppl selling at 12X..i thought it was 110 right?

Oooooo u got the KVR running at lower latency bro??
1.66v plak tuh

This post has been edited by cloudwan: Jul 20 2009, 10:18 PM

i'm not so sure.. but it's reminder... just pay the attention and prepare the bad possibility before doing something

This post has been edited by xixo_12: Jul 20 2009, 10:16 PM

yup, don't skimp on those /p/e/m/a/l/a/s when flashing using afudos

u can always undervolt & tighten d timin even d pair/stick rated @ higher volt/ timin. it's all bout luck in gettin sticks w/ better chipset & not forgettin some skills & time in tweakin.

patience is d key, gonna take it slow & easy, but w/ those kinda timin, i'm sure they'll hit d wall soon...

where have u been bro, been waitin for ya reply for ages for some guidance...

exactly...

d modded bios nowadays are windows flasher friendly, especially those in .cet format...

This post has been edited by ah_khoo: Jul 21 2009, 09:11 AM

Hello,
Why my proc when i make the Vcore to 1.275 there will be something my software will be not responding this is couse by my win or error oc. When i run Prime 95 around 1h30m it is ok...

Even 8 hours of stressing the proc alone wont give you stableproof system. If your apps arent responding you might wanna check out other things like ram timing, or most probably vcore tak cukup lorr.

An SS consisting of CPUZ cpu tab and memory would be good tho.

p/s : Long time didnt post here tho, looks like u guys have alot of new toys to play, me stick to the old 3800+ F3 only.

New target achieve.. looks like it will stay 1.088v @ 3.0Ghz

[attachmentid=1090212]

This post has been edited by xixo_12: Jul 20 2009, 10:58 PM

Miahaha, been busy ah bro these few days, went balik kampung for the weekend then have to hantar my youngest bro to KL for his Diploma studies in ASWARA KL..
Tired as hell..
I don't think i can help u much with DDR3 tweaking coz still learning as u are, besides i haven't tested tweaking the ram too much coz still learning about my cpu limitation
Sori bro/sis...