haish...will update again later
AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
|
|
 Jul 14 2009, 04:48 PM
Return to original view | Post
#1
|
 
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....  
|
i donno why..when i go caseless...it can
haish...will update again later |
Quote|
|
|
|
|
Jul 14 2009, 04:59 PM
Return to original view | Post
#2
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 14 2009, 04:52 PM) mobo touches case causin short circuit? aiya...going to pitcha pulak...taking girls picha? later ur wife increase the intrest of ur casing my new   short curcuit...i dont think so since the mobo sit on the short half screw..u know what i mean? that the one extend the hole to be reach to mobo..so mobo is floating on it... QUOTE walao..dh mule gila kot ur mobo bro..6GB.. 6gb of tracer..wakakak..loves the led dancing This post has been edited by kuntawakaw: Jul 14 2009, 05:00 PM |
|
|
Jul 14 2009, 05:40 PM
Return to original view | Post
#3
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 14 2009, 05:01 PM) dh try letak kt dlm casing balik? not yet..priming 1st... later once got a good result then baru put inside that casing againbtw mine 80mm bro..ade 5 lubang for 80mm...  5 lubang?  |
|
|
Jul 14 2009, 06:03 PM
Return to original view | Post
#4
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(-pWs- @ Jul 14 2009, 05:40 PM) Triple channel nih yeah..i did join aiseben secretly  -pWs- dush.. QUOTE(ventrilocks @ Jul 14 2009, 05:44 PM) 2 blakang..3 front.. oic1 kt blakang belah(Upper PSU) atas 14cm nye lubang kot.. @bro -pWs- tri channel..woooot~ hoo..put there as much fan as u can la boss... received my nidec 40mm fan edi..now to cool down the mosfet time... and just notice my nb8 left unuse... now time to use it la. .huhuh |
|
|
Jul 14 2009, 07:02 PM
Return to original view | Post
#5
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 14 2009, 06:35 PM) yup2..amd i5.. for the sake of bling2..keh..i bought zalman cf700 cu just becos it has a blu led hahaha..thinking if it was worth it or not..costing around RM40 for the fans.. done put the nidec fan at my mosfets..deng..noisy... and done putting on nb cooler...hope its not like last time la... This post has been edited by kuntawakaw: Jul 14 2009, 07:14 PM |
|
|
Jul 14 2009, 08:08 PM
Return to original view | Post
#6
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
bobiac..how far ur proc can go?
now im in oc mode..hehehe go caseless and fans all over... thinkin of 3.8ghz prime stable tonight |
|
|
|
|
|
Jul 14 2009, 09:22 PM
Return to original view | Post
#7
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(bobiac @ Jul 14 2009, 09:15 PM) not yet test. use ccf 1st la...i dun have wc yet. haish.the one that u took from pikacu.. sifus isit enough to stress the proc only with intelburn test? since i wan to go further..if prime..will consume alot of my time... |
|
|
Jul 14 2009, 10:14 PM
Return to original view | Post
#8
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(bobiac @ Jul 14 2009, 10:12 PM) 10 loop of IBT if enuf edi. maximun ibt..passed.. prime... 3mins then black out..so i stick with prime la...haish... the ccf for my bro rig. tomolo got the wc. dun worry hehe. ya...go la wc...thats y tonight wan to oc kaw2...at least i can be the winner for 1 night |
|
|
Jul 14 2009, 10:52 PM
Return to original view | Post
#9
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(PowerSlide @ Jul 14 2009, 10:21 PM) fuwah..all power power stuff and power power oc just run a superpi...deng. kunta u also attack mode now hehe..now im running mine 3.4@X4..finally can enjoy some smooth gaming   highest unstable setting i can get since im sleepy edi. x2 3.8ghz is hard... i cant get it stable at<1.4vcore.. im done for today decided the best 24/7 run 3.65ghz at 1.312vcore ur x4 3.4ghz at what vcore? QUOTE(cloudwan @ Jul 14 2009, 10:37 PM) Why u only at 3.4ghz got smooth gaming meh? even x2 3.6 also smooth..no need x4 ..hehehe At 3ghz@X4 pun i already satisfied with my 1920*1080 gaming, how smooth u want ley? |
|
|
Jul 14 2009, 11:04 PM
Return to original view | Post
#10
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(PowerSlide @ Jul 14 2009, 11:00 PM) nice run man! my last max oc i guess... i hate to make it oc stable at 1.4vcore..so i givup when my prime at 3.76ghz v1.38vcore stuck at 30mins... i wish i can get 3.8ghz at <1.4vcore..but impossible.. keep it up bromine..i put 1.33V..b4 this 1.35V..will keep trying lower it even at this V the heat is immense..my noctua just barely get its job done yea..gaming X2 at stock also fast enough hehe..but we just cant stay at stock speed rite..no matter what we must get in bios so now will run in stock clock i guess..later got mood, oc again.tired edi |
|
|
Jul 15 2009, 06:54 AM
Return to original view | Post
#11
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(verdict @ Jul 14 2009, 11:30 PM) 1.45 is the max for Air cooled!! oraitAll da best!  but i just want it below 1.4v...my aim that never to be acieved i do not wan to burden my board..huuuu QUOTE(bobiac @ Jul 15 2009, 12:33 AM) juz u wait kunta haha. huuuui will PWN u mayb next week. nvm.. since i can enjoy the crown for at least few days.wakakaka btw isit worth selling ogg this board and get a ta790gxe 128? |
|
|
Jul 15 2009, 10:22 AM
Return to original view | Post
#12
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
at last...3.8ghz x2 at 1.392vcore is here..
im tired..tired of waiting and frustrated of restarting btw..can someone tell me what else to tweak?ram..i know my limit the nb-freq and htt.. i cant find the volt adjust for them... i fogot to snap the nb-freq pics la..have to run again the test for verdict thread.. |
|
|
Jul 15 2009, 10:40 AM
Return to original view | Post
#13
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 15 2009, 10:36 AM) no bro, not goin ddr3 so soon but since they com cheap i just grab. gonna sell off my single core 3800+, backup ram + xtra 120mm fans. as my prediction... no more loan available... i will be the last man here to stay at ddr2..or mebbe ventrilocks the last.. @cloudwan..where to set the ht and nb volt at ta790gx 128? cant find it.. but i did saw the volt at bios HW health tab |
|
|
|
|
|
Jul 15 2009, 10:54 AM
Return to original view | Post
#14
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 15 2009, 10:47 AM) not so sure bout older 790gx boards from biostar but 790gxe has an imc volt that max out @ 1.25v only... haish...thats hard..since i cant find the option to change the volt.. anyway..in bios what is the name for it? nb-vid? cpu-nb volt? the mobo nb volt yes..i can change... QUOTE(AMDAthlon @ Jul 15 2009, 10:49 AM) Kunta..you need to tweak your Ram and NB edy..It is them that are causing it to unstable..try tweaking it ram is maxed out at 1016mhz using 800 divider...at 5-5-5 timing @1.9vdimm.. even i pump 2.1v doesnt help.. so far the nb-freq i can get stable at 277X.XXmhz... but to gain the 3.8 i lower it down.. what is the most stable nb-freq and ht combination? anyone knows? QUOTE(digswell @ Jul 15 2009, 10:53 AM) Check this in bios i belive it is the mobo NB right? but i can set at 1.20/1.30 and so on... running at 1.30v since using htt alot...Chipset Over Voltage This item allows you to select NB/SB Voltage Control. Options: 1.15V (Default) / 1.25V / 1.35V / 1.45V HT Over Voltage This item allows you to select HT Voltage Control. Options: 1.20V (Default) / 1.30V / 1.40V / 1.50V Semua kat T-Series Settings This post has been edited by kuntawakaw: Jul 15 2009, 10:56 AM |
|
|
Jul 15 2009, 11:04 AM
Return to original view | Post
#15
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 15 2009, 10:59 AM) maybe its me..coz my proc still AM2+..n urs already AM3 proc.. what is the name in bios? still didnt see HT n NB volt?the option shuld be there.. here.. done early in the morning..starts oc at 6 and end up to this setting at 10.30am » Click to show Spoiler - click again to hide... « @digswell..will again seek for it.. but i havent find since the 1st day using this proc..or mebbe need newer bios? what is the safe max volt for them? for 24/7 usage only.. @ah khoo ic.. 2100mhz. orait but u know how to calculate the nb-freq? i think i read somewhere..will seek again later..(but i cant understand..got hex la..ape la )This post has been edited by kuntawakaw: Jul 15 2009, 11:08 AM |
|
|
Jul 15 2009, 03:16 PM
Return to original view | Post
#16
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(AMDAthlon @ Jul 15 2009, 11:49 AM) NB Freq = HTT X NB Multiplier.. the ram i know my limit edi..only suits the 1066 and 800 and 400..the others is not suitable.so i think i go for 800 since wan to play with httHT Link try make it lower..and so NB Freq..maybe around 1500..Since this for testing purpose only..And for the RAM..try lowering the divider..For now u are finding CPU stability 1st.once done..then only tweak others. proc also know my limit.. below 1.4..dont wan to push more... (but the setting cant set at =1.4...it will be 1.392 and after that 1.408) so now only stable nb and ht freq only.. these 2 affect superpi score? i just wan a stable nb freq..too low and too high not so good..and im not running the oc for 24/7..just for find the max.. QUOTE(digswell @ Jul 15 2009, 01:34 PM) U mobo TA790 128 right ?? Check manual book pages 30 orait..will refer the book later.. i donno the manual also teach to oc..huhuuhThe safe voltage dont over then +0.05v from the stock voltage. normal 1 step pump (0.025) is enuf edy |
|
|
Jul 15 2009, 04:23 PM
Return to original view | Post
#17
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 15 2009, 03:41 PM) imo, either chipset or chip doesn't like ddr667 divider when htt > 230ish. mine can boot but w/ cmos cleared... my more louzy ram can do highest at 25Xhtt only at 800 divider... try to find out d max freq ya ram can do, then use ddr800 divider. if ya ram is good then u mite able to reach 280htt which is as ya wish. mine max out near 270htt & i'm on lousy twinmos value ram. @personified mebbe u dont have more choice...use 400mhz devider la..hehehe |
|
|
Jul 15 2009, 05:53 PM
Return to original view | Post
#18
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
just notice my proc idling at 25c
i think its sensors issue.. but now im priming..then i touch tip of my finger at a proc..that not being covered by the cooler base, and its cool... priming showing 38c..shud i trust it? prime at stock...demm.. now i just notice my temp sensor phailed |
|
|
Jul 15 2009, 07:32 PM
Return to original view | Post
#19
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(strife_personified @ Jul 15 2009, 07:27 PM) thanks for the tip ah_khoo, i set the divider to 800 and its doing well, had to lower my fsb a bit though, which sucks. lost about 70MHz, due to my ram's limitations i guess. can u pls do the max cpu for me?current overclock would be: FSB = 272MHz HT Multi = 7x (1400MHz) NB Multi = 7x CPU = 2448MHz RAM = 1088 (5-5-5-18) havent primed it yet, but i'll probably do so tonight after i test how low the voltages can go using 400mhz divider ofcos..just want to know how far the proc can go...can a?or u did that edi? |
|
|
Jul 15 2009, 09:16 PM
Return to original view | Post
#20
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(strife_personified @ Jul 15 2009, 07:40 PM) for the proc i'm using? so it maxed at that htt? at what vcore?the max i did was with fsb 280, which was 2520MHz. i believe extreem managed to get 2610MHz by using fsb 290. i wonder if we treat the energy saver phenom just like another phenom...vcore >1.3v...what shud happen then... |
|
Topic ClosedOptions
|
| Change to: |  0.0253sec
 1.54
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 06:54 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.