inside cpu there....the 1st vcore....

cpu vcore....

ai si..it seems nice temp..not as mine..messed up temp...hmmmm
nope2...the + is like cpu vid + the cpu volt
taking ur post as example, like 1.325 + 1.260(my bios/mobo limit at 0.7 only)..
so ur vcore is 2.5910v... i guess... if if its the same la with my setting...    

mind to tell me what bios and what board?since i saw u asking babyi..i tot u using the same board as babyi

i also have the prob with my volt if wan to lower it down... the VID set it lower la... lower then stock if wan to... and the +startup... (but i will not work in my case so i set it at +0.012v)

owh.. different with mine..hehehehe
sorry if i mislead u.let the others help u out..a noob like me is only make things worse leh...
.. but mind to try ###vid + 0.012v(or any value) to get the vcore u want to...

jz nw my fren told me try to unlock be 4 core....
thn i try again wif previous 4 core setting...
bt after tat....cannot boot any more.....

nw cant in to bios at all.....since open all blank...

thn phase led on board menyala...bt the led1nled2 off...
show as the board book --->Abnormal:Cpu/Chipset error.....

n i aso try to clear cmos...bt stil the same...

any1 can help it?

make sure u got white box for biostar model
don't know if it's true or not... what i saw, there is another version (red box) maybe, have problem with official bios.. i seen on cloudwan's case.. and another once can't remember

if wrong, forgive me

my
tmpin 0 alwys more than 50 even idle o load...

asus 40C...