Will do....i'll try max speed vs tight timings later... now still priming

Wrong....


Yap...got a couple of pieces (kits) left....prices around 140 like that for 1 piece (2GB) stick

Ok...I'll post what it can do then if you want I can keep a couple (wif depo of course ) kits...Each module is 2GB and with 8 chips per side, double sided...

come2 update us antonio

and also pls2 pm me the ram info as well... and if u have readt stock, name me the price sire

Any run on Intel i7 bro?

-pWs-

hi guys... m helpin a customer to setup pc. d sofware of everst n hardware monitor was not able to detect d correct voltage psu n also d temp for d unlocked 550BE not able to view seperately . any other softwre which is more accurate??

You'll need to rely on the external CPU temperature sensor on the motherboard. What board is that?

ok...here you go...just finished priming...9 hours

Prime95
Blend Settings
2600mhz NB-Speed
3700mhz CPU Speed

Priming


The Result



Tomorrow i upload pics of the modules...dunno where is my camera at...phone cam is horrible at close-ups...

But from the sticker

"Micron Technology bla bla bla CL7 bla bla 1066 bla bla 1.5v bla bla bla"

The chip is D9KPV


Nope...but tested on i5 but not OC...runs superb at CL7 1.6v 1333mhz

This post has been edited by antonio: Sep 22 2009, 02:27 AM

I think I will skip this pair of ram.
Anyway, thanks bro

http://www.xtremesystems.org/forums/showpo...26&postcount=39

-pWs-

its msi 770 c45

using fintek f71882f chipset sensor..

d voltage for 12v is totally out of order..zzzzzzz

I know your looking for 2000mhz...hihhihi

for anyone who know how to read chinese...read about KPV here... http://www.coolaler.com/showthread.php?t=218290

Update:

CPU : 3500 X4
CPU/NB : 2600mhz
RAM : 1333
Timings 6-6-6-24 1.67v





The reason I drop it because, after a long night of reading, I concluded that running more than 1600mhz doesn't really does anything in terms of performance of AMD Phenom 2...unless AMD strikes out with another architecture or a newly CPU revision, the current Phenom 2 is best perform at CL6 1333 (DDR3) or CL5 1200 (DDR2)



This post has been edited by antonio: Sep 22 2009, 02:30 PM

Any update i need to before a new thread?

No need...just proceed...were are like 1k post over already

Is there a limit for each thread?I dont think there is..
EG : cannot exceed 500 pages..etc is there a limit?

Post #3613 already. AMD FTW

Around 2500 post...