donno la.. fogot edi since i havent play much with x4

aisi..but in x2 mode, the choke, the mosfets not as hot as x4..so i consider them cool..i did discharge and leave for 1 hr..not helping...
still cant on.demmm

psu ok mebbe..
i think its mobo..tried with frens proc also cant..
so i donno what to do la..will rest for 2days..later if cant also, will leave the board..or mebbe leave the oc and am2 arena...
huuuuu
but i love my tracer..

sad case for bro kunta =.=....

wish u all the best bro...

mind to test it w/ my setting? if default it could be small fft which doesn't stress d ram & imc much. can't really complain bout d ht link bro, nothing's perfect when u pay $$ for 2 cores while gettin all four runnin. ht link itself doesn't effect much of overalll performance. u can always use higher htt & lower chip multi to compensate d low ht link if usin ht link multi @ 8 irks u.

This post has been edited by ah_khoo: Jul 19 2009, 11:01 PM

eh sis ah_khoo. which setting is dfi bios to change ht multi?

ht link freq

@ 2000 = 10x
@ 1800 = 9x

and d list goes on...

@ xixo_12

0922CPMW - xixo_12 - Biostar TA790GX3 A2+ - Mod Bios (RH) - Success

bro, you're using 0522CPMW right? Your processor can running 3.5Ghz (Quad-Core) with 1.425v / 1.35v ? btw, With unlock quad-core can you pass Windows Index Experience with default clock speed? I see you're using RH mod BIOS with HT Link fix. I am using 617 MODED BIOS, maybe the bios got problem...

phenom II x2 550 temp is quite high...last time 7750 idle less than 30....

nw 550 idle get 42...

any TA790GX A3+ users already update the latest bios?

it's 0922 not 0522, i'm not oc it... so dunno, running with stock cooler..

i'm not using vista..
the modded bios is 1/13/2009, get from RH thread (HTLink Fix) not all mobo supported..

modded bios sometimes contain problem, that why they say, do it on ur own risk..

erm, I think the temperature is ok (X2 550BE @ unlock quad), but after unlock, the system show the temperature is incorrect value. I use Sunbeam Tuniq Tower 120, it always manage under 40'c.

yeah.,sad..my money all gone edi..now to replace mobo also dono know how..

i think i will move on to am3 if something wrong with my mobo la.
msi c45 with kvr 2gb only... so will works just fine for replacement mobo + kvr....

any FXB to let go? dont mind JR or what..huuuu
if have installment, i love it...heheheh

This post has been edited by kuntawakaw: Jul 19 2009, 11:21 PM

i using...080014 bios moded from http://www.xtremesystems.org/forums/showthread.php?t=228782
can unlock 550 be....

if x4 load 65'c....hmm
tinking to change cooler...

take the board to rma....thn lets rock wif ddr3 bro ......

@babyyi
ya,just flash to that bios.. now can set my multiplier..
But,whr to set the core voltage ?

inside cpu there....the 1st vcore....

not core vid ka?

cpu vcore....

i got 49c for x4 default speed. ur temp quite high. maybe wrong temp read ?

okies thanks

yup...cpu vid i guess...but its vid la...or u can change at the voltage config>cpu voltage (the 1st one) -----i wonder mod bios still the same with my bios

i guess our board have a weird reading la...
what iss the idle temp for x2? mine is 25 at early morning... 30-33 in a hot day...

swt.1 core failed as soon as i prime with both ram installed.
whats wrong with my pc ?

This post has been edited by meh_man: Jul 19 2009, 11:40 PM