can silverstone ST560F support these hardwares ?
720BE
TA790GX 128M
4GB Ocz Reaper 1066
1 500GB hardisk
4890
AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
|
|
 Jul 19 2009, 07:50 PM
Return to original view | Post
#1
|
 
Junior Member
76 posts Joined: May 2008 From: Sabah  
|
|
Quote|
|
|
|
|
Jul 19 2009, 08:07 PM
Return to original view | Post
#2
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
then i got a problem that starting to bum me out.
I already change my mobo and ram but still fail prime95 blend test with everything on stock 1 core will fail within 2-3 min,the other 2 will keep running.(1.280 vcore,1.85 vdimm(800mhz),Chipset and HT voltage on 1.2v) so i tired to bum the voltage(1.35 vcore,2.1 vdimm(1066mhz),chipset and HT on 1.3v) its only a little bum but the pc wont even get past the bios.it would load back the default setting. i'm trying to pin point the problem here.so far i changed mobo and ram now i'm thinking maybe its the processor or PSU help would be greatly appreciated. |
|
|
Jul 19 2009, 08:21 PM
Return to original view | Post
#3
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
Yeah I did clean install of vista.
720BE with stock HSF TA790GX 128M 4GB Ocz Reaper 1066 1 500GB hardisk 4890 althought suriamas condo is famous for unstable electricity.1 of my house wall socket just exploded.My fren PSU was toasted.he was staying at a different house but same block |
|
|
Jul 19 2009, 08:26 PM
Return to original view | Post
#4
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
silverstone ST560F
|
|
|
Jul 19 2009, 08:31 PM
Return to original view | Post
#5
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
triple core only
|
|
|
Jul 19 2009, 08:48 PM
Return to original view | Post
#6
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
i'm starting to think the same thing.
proc getting faulty. it even failed on large FFTs test. i just change my mobo. its only few days old. so i doubt its the mobo. so the question is now. can i even rma the processor ? |
|
|
|
|
|
Jul 19 2009, 08:52 PM
Return to original view | Post
#7
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
yeah.item less than 4 months old
do i need anything else to RMA other than the receipt ? This post has been edited by meh_man: Jul 19 2009, 08:53 PM |
|
|
Jul 19 2009, 08:57 PM
Return to original view | Post
#8
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
yeah.
proc with problem is very very rare.amd or intel vista ultimate 32 sp1 CnQ.on or off.i still failed prime yeah i did that already.need confirmation on the version.78DEA525 BS This post has been edited by meh_man: Jul 19 2009, 08:57 PM |
|
|
Jul 19 2009, 09:12 PM
Return to original view | Post
#9
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
ram is running at 800 5-5-5-15
plus i ran large FTTs test and failed that as well i doubt is the ram |
|
|
Jul 19 2009, 09:52 PM
Return to original view | Post
#10
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
wow.
sifu stepping in. I'll get right to it |
|
|
Jul 19 2009, 10:20 PM
Return to original view | Post
#11
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
QUOTE(antonio @ Jul 19 2009, 09:48 PM) Disconnect all...and i mean all your PC components...CPU, Mobo, Rams, Fans, HDD etc... what about the mobo molex ?should i connect that as well ?Then Prepare the Mobo, CPU, Ram (1 stick only) CPU n HDD.... Other stuff no need to connect...but CPU heatsink n fan dont forget lorr... In Bios; use this settings... Overclock Navigator: Manual Overclock CPU/HT Reference Clock Mhz : 200 CPU Config : Auto PCIE/ATIG Ref Clock :100 SB Ref Clock :100 Spread Spectrum: Off Under the CPU/VID Control Custom P-State: Enable Core FID : (x13.5 for 2.7ghz) Core DID : Divide by 1 Core VID : 1.3v NB Frequency : 1800 Voltage Config All make default except DDR voltage +2.0v (your highest DDR +v value) Memory Clock Memory Clock Mode : Manual Mem Value : 800Mhz Below settings all auto. Try that, save restart, then boot into windows.... see what happens... Run Prime, choose blend with 4 Priority...  |
|
|
Jul 19 2009, 10:38 PM
Return to original view | Post
#12
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
i plugged it in anyways.so haha
screw the windows index experience as long as you can pass prime.your pc is stable. although i got the feeling there's something wrong with your gc |
|
|
Jul 19 2009, 11:40 PM
Return to original view | Post
#13
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
swt.1 core failed as soon as i prime with both ram installed.
whats wrong with my pc ? This post has been edited by meh_man: Jul 19 2009, 11:40 PM |
|
|
|
|
|
Jul 19 2009, 11:56 PM
Return to original view | Post
#14
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
there the ss
read some of my post before for additional info i get the feeling that the ram is running a bit too hot thats why it failed prime gonna try priming with the other stick or maybe i should just run memtest |
|
|
Jul 20 2009, 12:08 AM
Return to original view | Post
#15
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
seems to me that if i try to run dual channel
prime instantly fail. wonder whats wrong ? i'm priming with the other stick and seems to be stable. |
|
|
Jul 20 2009, 12:13 AM
Return to original view | Post
#16
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
QUOTE(ventrilocks @ Jul 20 2009, 12:10 AM)  RAM problem there? run mem test one stick by one stick.. seems to be fine if i occupy 1 slot but the moment i put both,prime would instantly fail did i miss something at the bios setting ? This post has been edited by meh_man: Jul 20 2009, 12:15 AM |
|
|
Jul 20 2009, 03:37 AM
Return to original view | Post
#17
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
thanks for the diagnose technique,i'm able to pin point whats wrong.
the first dimm is faulty. so i move the ram to the second dimm primed like a charm. but this is where it gets messed up again. prime failed when i bump the rams to 1066mhz i only messed with the ram voltage tho. 2.1 to 2.2v but both setting failed in prime |
|
|
Jul 20 2009, 03:56 AM
Return to original view | Post
#18
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
the memory slot was faulty
yup.the timings are on auto. |
|
|
Jul 20 2009, 04:18 AM
Return to original view | Post
#19
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
the first 2 slot can even run on 800mhz without prime failing,let alone 1066mhz
so i move both ram to the second 2 slot which can run 800mhz without failing prime. only problem is it cannot run 1066mhz. so yeah.both is correct. Added on July 20, 2009, 4:24 amwhich is NB voltage ? chipset or HT ? This post has been edited by meh_man: Jul 20 2009, 04:24 AM |
|
|
Jul 20 2009, 04:34 AM
Return to original view | Post
#20
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
once i set 1066.
computer would post,but failed prime CPU vcore :1.280v DDR voltage:2.144v Chip voltage:1.184v HT voltage:1.200v should i bump chip and ht voltage to 1.4v ? that seems like a leap in voltage and i couldn't find the setting for tRFC i did found tRFC0,tRFC1,tRFC2,tRFC3 and the options are 75ns,105ns,127.5ns,195ns,327.5ns |
|
Topic ClosedOptions
|
| Change to: |  0.0187sec
 0.18
 7 queries
 GZIP Disabled
Time is now: 29th November 2025 - 04:35 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.