wah..200km ....mostly stuck around 185++...but right after 170, the meter goes up slowly...it should be the ecu limit the power..and without ecu limit...210/220 easily... .....what modification that make going topspeed faster??..lighten campulley, smaller tires series, knn, exhaust....

Intake n exhaust 1st, then can get those lighten parts.

Almost bought a Zenden strut bar at Racing Fit Sunway (RM155) after the dyno session, but no stock for red color.

stock dyno

Compared with mine.

+5hp power, +5nm torque

This post has been edited by sphiroth: Mar 4 2009, 10:15 PM

Torque increase is ok what. Means better acceleration. Faster overtaking. 245 is a good price. I'll check the automotive garage section later.

Anyway, I did notice 4th gear acceleration is really good. Zoom straight to 180 like nothing. Every gear after 5k RPM engine revs to 6.5k very fast but 5th gear like soooo siput wan~ Stuck like u said la about 5.4k and no more wind to run

---

Added on March 4, 2009, 10:30 pmUr making me salivate

This post has been edited by feedzz: Mar 4 2009, 10:30 PM

Hello to all the sifus here.
Just bought my gen2 cps, should get by this week. My 1st car so very excited!
This thread so active... I read from 1st page, in 1 hour got 10 new posts already. Haha...
My car is 2008, but the agent say the promo only 2k discount... some more he show me the stock list from proton, say very few units left only as they clearing stock and production for the Exora. Worst is that only color avl is the black one. Dunno whether kena con or not. When I take delivery will try to ask for some freebies.
Very noob about cars so hope can help me with some questions:
I see ppl saying want BOT the car... what's that?
Where to get R3 parts? I see can install R3 spring w/o voiding warranty. Will do if not too exp. The prices quoted here got include installation?
Also dunno the diff btw strut bars... front, back, under-arm, 2-point, 3-point... Are they exp? I only bought a RM60 one before for my mom's kelisa that connects to 2 sides under the bonnet.
Seems like so many things to mod for this car... I slowly kena poison also...
Anyway, can add me in this list:

norseman - nanbo black - **** - AT

MT seems more fun and powerful, but driving in KL jam I dun wan step clutch until leg cramp. Like yesterday's flood jam, so scary...

Dun even know my plate no. yet, haha... Register in Johor but will be using in KL. Can anyone recommend a good service center around Maluri or PJ?

Black Gen2 is nice, just need extra effort to keep it clean.

BOT=Bolt on turbo.

R3 parts can get at Proton COE or at RACE glenmarie. But without promotion, the price are higher than are brands such as GAB.

For the bars explanation, go to ultra racing website.

Get the MT for most satisfaction. One more thing, even with the clutch fully release and gear engage (1st until 4th), the engine will not stall even if you didn't pressed the throttle, except when you pressed the brakes. This actually make it easier in jam.

Thanks sphiroth! Just out of curiosity, AT cars can use BOT also? Will it affect the gearshift?
Car is an exp hobby... just detailing alone like glazing and sealing also so much money... Haha...

Also R3 parts are mostly out of stock right now. That's information from RACE and Proton Platinum Centre in Damansara. Apparently R3 stopped production end of 2008 and haven't started new production.

For servicing the COE is not far from your place, it's in glenmarie. I only service twice so far. Once proton authorised SC in Bangi, Spin automotive services and The Damansara Mutiara Platinum Service Centre. I'd be going to spin again next time as the Platinum centre very slow and they charge extra for small things like filling up my wiper fluid.

If really wanna bot, get a 2nd hand car. Use the extra budget to mod. BOT will easily cost you RM5k and that without management/tuning.

---

Added on March 4, 2009, 11:10 pmCOE is along Kesas highway, but at Glenmarie also got SC. One thing I like about 3rd party SC is that they allow me to bring my own engine oil and stand beside my car when they do the service.

This post has been edited by sphiroth: Mar 4 2009, 11:10 PM

True that. Turbo maintenance also more. I used to drive stock turbocharged car before. Lots more to check and change also. Remember turbo runs hot.

---

Added on March 4, 2009, 11:13 pmYea, also another reason for me to not go to proton SC anymore after this. Any recommendations on engine oil sphiroth? I'm thinking of going for perf oils since I really push my car lots. Wonder about gearbox oil also. Any good to change to performance ones??

This post has been edited by feedzz: Mar 4 2009, 11:13 PM

Guyz, can you pls share where I can get R3 visuals? Like stickers, stripes etc??

Thanx~

True, furthermore no use of using variable valve lift tech when using turbo as its make the tuning alot more complicated and there's reliability issue also.

Sticker and emblem can get at any accessory shop that sells sticker. But to fing the high quality one is quite hard unless if its original. The high quality R3 emblem is RM28 which I almost bought but didn't because afraid later people will steal it.

I use Helix Ultra Fully Syn 5w40 but they guys at RACE use Castrol Edge Racing Fully Syn 5w60 for their race preparation package. Maybe its better.

This post has been edited by sphiroth: Mar 4 2009, 11:18 PM

Haha... I dun think I'll go that way for years to come. Just small mods like extractor, camshaft, brake hose, pads, spring, bars, spring, filters, tyres, ICE...
Alamak, starting to sound like a lot also.

Camshaft is not small mods as it already considered the engine internal. Furthermore, have to wait for R3 to come out with performance camshaft for CPS.

Ya... I checked with NS they also say extractor and camshaft for CPS still under R&D.
If 3rd party SC service, can still claim warranty? As long as Proton authorised right?

Is this site recommended?? http://www.stickerontime.com/myweb/EMBLEM.HTML

Thanx ya~

Can claimed, but better claim at SC because faster as they keep more spareparts. If 3rd party SC, usually need to order.

Very expensive. The Rm60 emblem are sold at RM28 at a shop in Sunway.

Mind sharing bro? thanx~

Do Gen2 CPS and Waja CPS share the same air filter size ?


I am waiting for my car to deliver , sadly for Manual I cant find Black colour so end up with Grey , discount is RM3088