u can try pandan leaf....not bad...hehe

i dun think accord can pull away during the 0-100 sprint. we shouldn't be too far behind. i'm seriously very confident with our cps engine sprint.. hehe..

having said that, really need to find the gearshift levels that are most efficient in terms of getting into the powerband and not wheel spinning.

normally i will rev until 4k in 1st gear, then 5k in 2nd gear n onwards. i tried 1st gear until 5k but sure wheel spin. and loss of traction as a result of tat...

can other cps MT members discuss more abt the normal gear upshift to get the best powerband across each gear change? (sorry to AT cps members... teehee... )

This post has been edited by jctasoga: Feb 28 2009, 10:03 PM

hmmm..yea..if manual cps can do 8/9secs...even posted on youtube...that fella red line... .....


This post has been edited by loong2020: Feb 28 2009, 10:40 PM

Newest video.



This post has been edited by sphiroth: Feb 28 2009, 10:30 PM

when i play pickup its start normal then floor till 7000rpm then upshift to 2nd then 7000 upshift to 3rd then immediately 5th cause oledi doing 120km/h.

Nvr tried dumping clutch at 3000rpm. Too much noise and too much smoke. tires expensive.

the rest of the cars left behind. even the Yamaha 135LC will win in my first gear then i slowly catch up. When I upshift to 3rd the fler kena tinggal behind.

wait till RACE develop full set Waja CPS exhaust kit..then i will play with Civic 1.8. City and Dugongs i not interested.

Jz tinted my car last Sat. RM700 full Solar Guard Silver. Now my glass like 1 way mirror. hard to see inside when bright outside.

I was doing rim shopping today. I saw SSR Type C replica. Need to top up RM800. Remain same 15'. Rims only weigh 5.1kg each. Damn light..Avail in white, silver or gold.

I'm poisoned by the gold colour. Cause my car is Metal Grey

Stock rims are like at least 8kg each. Even Lenso Samurai SC01 also 7kg yet they claim superlight. What a load of rubbish...

aha..cant wait for RACE man....

bro..lenso samurai they claim 7kg is 17 inch rims bro...17 inch for 7 kg is light lo...if 15 inch = 7kg..thts heavy...ssr type c is nice rims..another nice rims is advan racings rgII or SSR professor SP1..i love those rims...yummies...

my rims now is 17 inch weight around 7.5kg ...not include my 17/50/215 tyres...next wana changed 45 series lioiu....50 series abit too heavy la...hhhaha...

This post has been edited by eujinee: Feb 28 2009, 11:40 PM

yup,the input connector type at hu not the problem to me,i got all the connector type since i'm doing electronic...
problem is how to take out the hu leh???
i think i'll try to take out the hu by myself first tomolo, i try to snap the photo and share with u guy interested with this

i always watch drama using laptop inside the car,ipod, handphone ...so i need aux input so much

this will be a bit tricky for first timers. i also watch my audio installers take out the centre console on realize how 'easy' it is. not a big hassle but require some trying out.

things/gadgets u will need:

1) screw drivers - philip + flat head (optional)
2) foam tapes (optional but recommended)
3) aux cable RCA (obviously)
4) 100plus (cold one recommended)
5) 30-45mins time

steps:

1) make sure all ur electronics are off, keys off the ignition (particularly i hate that beep beep beep sound)
2) unscrew ur gear knob. rotate it anti-clockwise.
3) there is a rubber piece in front of the gear console. its just below the coinbox/ashtray. flip that up and you should see a philip screw there. unscrew it. no need to take it out.
4) there are 3 clips on both sides of the head unit. there are six clips altogether. u will need a bit of force to take them out. pry it a bit and pull towards yourself.
5) you should be able to see the row of philip screws. there would be 4 of them holding the headunit. unscrew them and take out the HU.
6) plug in the RCA for your aux input
7) i don't know how you will active the aux input but try a few buttons on the HU.
8) put some double sides foam tapes on the clips before u put them back. mine was loose so there was slight vibration when i drive the car.
9) reverse the above orders and voila, enjoy ur new settings.

note: if ur aux rca cables are long enough, you can pull it down to the rubber compartment in front of the gear console. there are empty space at the back of the ashtray/coinbox.

if i missed out anything, please feel free to add on.

happy DIY-ing

for the aux setting...try to press and hold the "MODE" button (if there is any)....as for gen2/persona owners u can hold the MODE button for AUX mode.....for waja maybe its same...just sharing wid everyone out there...

Since u watch video in car, why not upgrade to the 2-DIN touchscreen DVD player

Last time (previous car), change my HU to the one that has front AUX in to connect to ipos, hset, mp4 player etc. But only use it for the 1st few weeks...

sphiroth, i tot u wanted to install the touch screen wan? hehe.. go first la..

but actually i think its a waste to install in waja. only driver side can watch coz the console is a facing towards the driver.. truly a driver friendly car..

Now I concentrate on performance mod.

halooo guys,

dammnn soo freaking bzzzzzzz.....wah sphiroth new video post!!!

just to update 32k service PSC Pandan Indah on last sat...

RM319.00

ITEM:-

- Shell Helix HX7 10W-40
- oil filter
- air filter
- radiator service & coolant
- oil gasket drain plug
- screen wash
- balancing
- alignment

labour RM56???( will check resit again:sweat: )

others:

- my driver side door sensor fuse kong,ordered oledi(under warranty)
- adjust driver side window..not smooth got weird sound when open the window but now ok..
- re-pump the tyre airpressure..
result =

guys..wut if i do another layer tinted for rear..issit allowed?mayb go for 90% dark

oledi survey on rims...n still surveying ...n i`ve oledi book R3 spring at proton shoppe wangsamaju...oledi book last month but i`ve fail to collect(me at bangkok ),they sell to other...this time put money cant wait!!!

new monster spotted.....and remember to share ur video hehehe.

did u weight ur rims before buying? Samurai SC01 is 7kg for 15' size...i'm shocked for a claim that says its a lightweight.

seems that SSR replica is my choice...

- radiator service & coolant
- balancing & allignment

20k didnt do ? this 2 exp woh .

PESC can order Spring ? how about Absorber ,dnt wanna change ?

This post has been edited by lgs: Mar 2 2009, 03:22 PM

i xcidently skip service at 20k( me at oversea) then my bro `enjoy`driving cps until 33k

its not PESC..its PROTON SHOPPE ....like one at glenmarie...yup with new absorber..but still thinking wut type to slot in with R3 spring,wanna sport abs or ori proton abs(stock)

This post has been edited by R.Y.D.E.C.K: Mar 2 2009, 03:44 PM

wah sudah lama tak masuk this thread... being busy working working working..

anyway, yesterday my car "injured".. my wife want to drive into the garage but the passenger side door kena tembok and now the door a bit dented and got a long deep paint scratch..

Hope you didn't fight wif your wife larr, heheh

Btw, where is the nearest service center for proton edar around bandar tasik selatan..? i'm just new in this area, n dunno where to go for servicing my cps.. help needed here.. thanks