I had an interesting and frustrating experience at the NCC at 1U yesterday.

I sent in my phone to fix the earpiece problem. Ok, went back in 2 hours and it was done. They told me they had replaced (???) the earpiece. Ok, great, new earpiece! Then they asked me to check the phone. So I long pressed "1" on the dialpad to call my voicemail to test the sound from the earpiece. The next thing I know, the phone shut down by itself! I was like, WTF?! I did it again (switch on fone and long press "1") in front of the NCC staff another 3 times, each time the fone shut down by itself.

So they immediately got the technicians to attend to this problem. It took them another 1 hour to fix the problem while I waited there all the time. Finally fixed the problem (the staff told me not sure what technical problem and they had 2 technicians working on it then!). Then I noticed the top right corner of my screen protector was peeled off a bit. Can't stick back properly again. Again, WTF?! But luckily, it was only a very little bit, so i decided to let it go. The staff told me it must have happened when the technician was checking the touch screen. Most importantly, the fone was fixed. Luckily the SP I bought was the Skool one and it only cost me RM18.

Then balik. This morning, took out my fone to give it a good cleaning and wipe down. Then only I noticed another problem, finger marks UNDER the screen. For the third time in 24 hours, "WTF?!" Dem frust! I am gonna go back today and f*** them nicely today.

This post has been edited by jpaq: Jan 21 2009, 10:57 AM

Good Work....strive for the number 6 pls pana...we need you here...

---

Added on January 21, 2009, 10:56 amMake sure you play safe...

This post has been edited by leongtat: Jan 21 2009, 10:56 AM

no the touch screen vibration...

i mean when u activate the silent profile, but vibration is not functioning even i choose a song...

but if general profile, i change the ringing type to silent then it vibrate

act, we will know which area was updated if we read carefully the front page.
i folowed it up evryday & it automaticaly memorized in my head.
That's all it takes, really. Pressure and Time. (Script from Shawshank Redemption)

Did you activate vibrate in your "Silent" profile settings?

omg, they leave their finger prints under the screen
you will only notice the finger prints when the light is off, right?

Yes, yes, display light must be off then must check under indoor lighting. Outdoors very hard to see wan. I didn't spot it while at the NCC cos was so busy testing the other problem and it was already 8:30 pm and i belum makan yet. Somebody is gonna get a screwing from me later at the NCC.

This post has been edited by jpaq: Jan 21 2009, 11:06 AM

Hei Conversion from AVI to MP4 is take reasonable time...

but to convert mkv to MP4 really takes lotsa of time...

tried many converter but most of the converter take more than hours to convert mkv to MP4...

any software recommend for a faster conversion?

---

Added on January 21, 2009, 11:14 amConverting time for the SUPER is too long....still the total converter is the fastest interm of converting...

This post has been edited by leongtat: Jan 21 2009, 11:14 AM

software cant help much, it just the setting/resolution u choose will help

video converting is more depending on your processor, good if u own a quad core / i7 8 cores
with a 4870x2 or GTX 280 at least , then u will see improvements

yes.. "silent" profile activated and vibrating alert "on" but when incoming call still no vibration..

but in "general" profile i change the ringing to "silent" and vibrating alert "on", incoming call will silent with vibration...

try Any video converter. i'm using that

Corrected:

any video converter... could not convert mkv file...



This post has been edited by leongtat: Jan 21 2009, 11:27 AM

Try one more thing... use a default ringtone that came with the fone, then switch to silent profile and test and see.

Otherwise, sounds like you have to send the fone in to a NCC to check and fix. What firmware version are you on? You may need to update the firmware. If you are on v10 then should update to v11 firmware and see whether problem still there or not. But remember to do a backup of your fone before you update firmware.

It works. I also tried the latest custom 3.keymap with with button up and down. The button seems lagging. Anyway, i am not sure why my Garmin is not showing no map when i try to navigate. I have the malsing map installed in it.

hey, i faced tat problem b4. lazy to find the root cause, i uninstall the Garmin and start over again.
wont take too long only around 15min. maybe u missed some steps coz concentrate too much on the virtual key.
btw, try use the Garmin v5.002.

a simple question here...where can i go repair the earpiece in kl? my phone is from avaxx...

i found out our camera button sometimes very difficult to press, too soft d... but the garmin usually require down key more than up key

so it is better to swap the center menu key with the camera key in the keymap file ;p

---

Added on January 21, 2009, 11:45 am a simple answer, read first page for ncc

This post has been edited by hvaly: Jan 21 2009, 11:45 AM

Simple answer... front page

Share some new apps here...

ever try to unzip some zip file?

Here is winrar...

 WinRaR.zip ( 123.94k ) Number of downloads: 14

To anyone with questions, please please Read The First Page First!!!!!!!!!!!!!! If the answer is not there then only ask in here.