3210MHz



cdlim87/ DeepCool IceBladePRO/ Tuniq Tx2/ AMD athlonx2 6000+ @ 3.21ghz(7% overclock)/ 1.39v(loaded), 1.424v (idle)/ stock fan + CM 120mm (69.69CMF*pull)/ 39c/ 53c/ non-aircond/ ORTHOS




This post has been edited by cdlim87: Dec 30 2008, 04:14 PM

WOAH! This is freaking good result, I guess AMD's large IHS got something to do with it, no?

lim , try 2 deltas dont forget to put ur headphone on too.

This post has been edited by chyu89: Dec 30 2008, 07:53 PM

delta super high CMF fan = super high noise...
wat i dun1 is noise.. this combo fan not bad... stock fan 1500RPM max(if no mistake), CM 120mm (69.69CMF) 2000RPM max,
so, the noise is vy low even running at full speed

noob question here, can i change the sunbeam CCF fan to a faster fan? the noise isnt a matter to me, just want the fan to be able to run very fast.

Riggo yea, you can definitely change the fan no problem. But the clips only work for the usual 120mm fan size though.. Not sure if it'll fit the higher performance 120mm with bigger thickness.

Just wondering , how much does a high performance 120mm fan cost? and can the fan stated above be installed into deepcool iceblade? is there much difference between CFF and Iceblade if both of it installed with high performance fan? >< i know im asking too many Qs , sorry for any inconvennience >"<

Normal delta fans i guess around 30-50 gua.. if you got budget get Silverstone fm123 lo.. Strong enough but no as strong as those insane deltas.

• 
  for sure u need pay more for the high performance fan, if u r tight budget mayb go to garage sale looking for a 2nd'hand unit..
• 
  IceBlade PRO & CCF both come with fan clip, thy can supported to any 120mm x 120mm x 25mm fan..
• 
  diff btween CCF and IceBlade?? this u need looking up for the review doing by bro coolice,
  if not mistaken, CCF perform beter thn IceBlade, but IceBlade can do push-pull to improve the performance
  both HS hv their advantages... depended on ur own budget and which 1 u like..

p/s: i will post other result aft this, u should noe athlonx2 6000+ is 1 of the heat monster,
but u can refer to my result how the IceBlade handling the temp..

* dun hesitate to ask any question here, feel free to ask any ques
as long as the ques can be ans, there will be ans for u..

This post has been edited by cdlim87: Dec 31 2008, 01:54 AM

I dunno about the very extreme fan speeds, but for my case, 1k versus 2k aka the stock CCF's min vs max is only 2C difference >.<

Your casing all mounting place got fans already?

Yeap. Well I'm changing the fan setup when I'm free.

Was using 2x140mm exhaust on top, 1x140mm intake from the side for GC, then the usual 80mm at the back of mobo, 1x 120mm exhaust at the back and 1 120mm input at the front + one 120mm from the bottom.

My plan is to take out one of the top 140mm fan, put it to take intake air at the 5.25" bays. That 140mm seems to be fighting for air with my CCF's fan . CCF's fan rpm drop a little when both is turned on.

This post has been edited by celciuz: Jan 1 2009, 01:06 PM

for high peformance fans i think we could get from AllnGap or niclasteoh. i got mine from AllnGap, he does sells delta fans --> 200++cfm

LOL, that monster 120mm. I think it'll create a mini tornado inside your case . Wonder how extreme will the vibration will be hmm.

Anyone used those here in their HSF setup? How much improvement over stock ignoring the noise?

results updated.... sorry ya...

gua new year mood so update lambat sikit

2.21GHZ

amir89 / Sunbeam Core Contact Freezer / Tuniq Tx2/ AMD X4 9500 Phenom @ 2.21ghz (0% overclock) / 1.24v(loaded), 1.05v (idle) / CCF Fan / 19c / 27c / Aircond / ORTHOS

Great Result there bro...later need to post some SS for your new OC result...

thx for updated... happy new year..

yeah.. will post here aft get stable OC

EasternBadge/ Cooler Master V8(lousily lapped)/ Thermal Fusion 400/ Pentium Dual-Core E5200@4.0GHZ (60% OC) / 1.47V/ Stock Fan/ 37c/ 65c/ Non-Airconditioned/ Prime 95


This post has been edited by EasternBadge: Jan 4 2009, 10:03 AM

amir89, not full load spotted