Yea I know the temperature its good but just curious when the fins doesnt heat up during load. So I guess you're right and I got my answer. Thanks bro

Will this VGA cooler fit my CM690 casing?

Accelero XTREME Plus II
http://www.arctic.ac/en/p/cooling/vga/376/...me-plus-ii.html

CM690 can remove hdd dock if the gc too long if im not wrong
should fit

errrrr
the heatsink and heatpipe cold is a good sign IMO
if its hot.. how to make cpu cooler?
for example, remove heat sink fan, it will very hot...

Which CPU Cooler would u buy if...
1) Quiet
2) Efficient
3) Look good
4) below RM200
5) Available to buy in LYN...

This post has been edited by timothyy: Sep 19 2011, 05:10 PM

Barely fit in.. Depends on what graphics card you r using also.. If your 6pin power for graphics card is at the side then yes..

CM690 do not have removable or detachable hdd tray.

you can consider Corsair A70.. RM 16x-RM18x.. Dual fan summore.. 4 direct touch copper pipes.

ops... its CM690 II

Cooler Master V6GT and Scythe Ninja 3

Guys, I'm looking for a 3 x 5.25 drive bay fan bracket like the Scythe Kama Bay PLUS. If I were to look around Lowyat, would there be any other cheaper alternatives (or even the bracket itself [fan own supply])?

Hi sifu-sifu, arctic f12 really has 74cfm as shown in the official website? can noctua nf-p12 or p14 beat it much cz the price has a big range...==

not 57cfm meh
P14 can kill it easily but around 2x expensive

Ya.. It is really confusing. The official website state that it has 74cfm but clawhammer stated in his sale thread that it has 57cfm..==
Btw, how much is the static pressure for arctic f12? Is p14 beat it bcz of static pressure? Or cfm?

This post has been edited by xNinGx: Sep 24 2011, 06:26 PM

I would like to say that V6GT is not quiet at load

P14
very very silent
64.9cfm
the engine sound really soft as you stick ur ear on the fan frame
no idea about F12
but i heard F12 have pretty high static pressure

really considering nf-p14 but f12 seems lots cheaper than it...==

y u compare 140mm fan with 120mm fan???

Bcz both are popular fan and I wanted to know that their difference in static pressure... Any idea?

go for F12
its a lot cheaper than P14

popular or not is not the case, u must know if u can fit a 120 or 140mm to your case 1st then only u can compare. btw scythe gt is much better in my opinion if u wanna compare. and to be honest i dont think p14 is popular in malaysia... heck even everywhere else. noiseblocker 140mm is much better.

Erm.. I am not going to fit it in my case but heatsink. The reason I chooseto compare p14 is bcz the feature stated it support 120mm fan's hole too. Btw, noiseblocker is not worth that much due to its performance with that high cost.
Any recommended fan with high static pressure and acceptable noice? Like the brand u mentioned: scythe. Thanks for any suggestion. ^^

what heatsink is that?