any1 know how to combine to 2 cpu fan wire into 1? Like my cm hyper 212+ if add 1mo extra fan.

ya

---

Added on April 26, 2011, 11:51 amdual arctic cooling F12 PWM did not hlp on my cm hyper 212 plus, i compare it with single cm blade master, almost same temp, i not sure is it only me?

This post has been edited by FiragaZ: Apr 26 2011, 11:51 AM

pwm version rpm speed is according the temp of my processor, so my system during load, the pwm ac f12 performance shud b same as the standard f12.

i would recommend cm hyper 212+ and cm v6gt. My cm hyper 212+ can oc up to 4.8GHz, idle temp around 45-50c, stress is around 90c. For 4.5Ghz, my system temp, idle = around 40c, stress around 70c, seems u r expected oc to 4.4Ghz, cm hyper 212+ will do anything well for this state. Price is currently around rm85.

i tried cm blade master (same as cm hyper 212+ include fan), arctic cooling f12, xigmatek xlf1253 (my case fan actually , also currently using it, its orange led fans), all perform just same, not even 1c different.

Some ppl said cm blade master is better for cm hyper 212+, u can try cm xtraflo fan too, the airflow is extremely high and price is cheap, the design is almost same like cm blademaster, but in red fin and led, the noise leh , dun worry its pwm .

+1 for cm xtraflo, its around rm27, cm blademaster price also around rm27-28, why not this? but might cost more, because have to get 2 for balance ur rig look , dual red fans ma.
http://www.coolermaster.com/upload/product...atured/top1.jpg

This post has been edited by FiragaZ: Jul 7 2011, 09:34 AM

is this the temp of ur 4.7ghz? even my stock i5 2500k at idle temp is around 29c-30c . But i must say my room temp is higher a bit.

Pwm is a method of fan control, the fan speed is according to the cpu temp, if ur temp rise, ur fan speed rpm will rise too, it helps reduce noise when ur system is idle. Control speed of fan in molex i never try b4, y would u put the cpu fan on molex? the fan socket use habis?

For my push pull config, i put another fan connector to the closest fan socket from cpu cooler.

I not sure xtraflo is coming with the cable like this not, there is a 4pin fan socket stick with fan connector http://www.koolertek.com/computer-parts/pc...ac-1006-d-3.jpg
Last time i am using arctic cooling f12 pwm push pull, i plug another AC F12 into the 4pin fan socket.

This post has been edited by FiragaZ: Jul 8 2011, 10:58 AM

aiyo, y dun xtraflow as intake and exhaust? both red led looks much better, btw which xigmatek 120mm fan u r looking for?

xigmatek xlf-1253, i got 8 in my case . I heard some lyn guy said xtraflo noise is similar to blade master.

ya, it is very silent and the airflow is acceptable too . U got ur xtraflo already?

u put xtraflo as intake, den how about ur cm hyper 212+ push pull?

Since ur budget allow, i would recommend air Cooler like Scythe Ninja 3, Noctua NH-D14, Prolimatech Megahelm, Thermalright Venomous.

I personal dun like Corsair H Series, those high end air cooler like NH-D14 smoke H50, H70, but beware the heat sink size too , make sure ur case able to fit it.

Scythe Ninja 3

Dude, speedfan is not accurate, try using hwmonitor and realtemp. Btw it does improve alot.



This post has been edited by FiragaZ: Aug 2 2011, 12:26 PM

CM hyper 212+ den, rm83 from forumer. Or CM V6 rm169.

ur budget?

yeah, it sounds like jet, but the performance not bad, can even beat V8 and V10 in some benchmark.

---

Added on August 18, 2011, 12:16 pmseems ur case theme is black + blue, try this guy out. http://www.xigmatek.com/product.php?productid=80

This post has been edited by FiragaZ: Aug 18 2011, 12:16 PM

Cooler Master V6GT and Scythe Ninja 3