there is a very strong wind noise from my gen2 cps left hand side once reached 80km/h.
what could be the reason? weather strip? alignment of door?
sounds like window not closed properly.

Wow! Congratulation!! When did you order your car? My salesman told me last week end of the week can get but now still no news. Telling me all sorts of rubbish by saying PE is currently busy as they are rushing cars to Sabah/Sarawak for CNY season. Hope its not too long a wait!!! Cannot tahan already~!!

not a fast deal i would say, started to apply for loan on 24th Dec, public holidays+change dealer contributes for further delays

should be door alignment..try rub around the door edges to feel if there is any gap/ misaligned.....if its ok..then is the weather strip/the power window rubber....either 1.....for weather strip..try to see if there is wrongly fitted.....if there is....pull out the rubber and realign it urself to see if the problem solve.......if not send to S.C

Time for an upgrade. Adjustable suspension?

The visor can also contribute to wind noise.

thts i wana say...the door visor....they usually dun stick it nicely..got gap...thn go wind noise..i toook it out and restick it back with new 3M double sided tape...thn wahlah...kau tim...

My car has no door visor.
Scared to pull out the weather strip. After tear. Sigh... have to send back to SC????

...wont tear..just pull it out facing downwards.....if u scare spoil send to SC then..

Wow! And I only ordered my car last Monday!! Looks like I'm in for a long wait! Luckily loan already kao tim!!

don't they suppose to do proper cleaning before affix the tinted film? Never heard of oil on the glass for new car anyway.

U see, the car that we get is not immediate roll out stock from factory, therefore how they can judge at least 1 week is sufficient? How about the new car in Proton Factory or Dealer storeyard that been under the sun for more then 2 weeks before owner collected the car? Don't make sense right?

long havent drop by here... looks like cps member alot oledi...

just wanna ask... did my 30k service for my gen2 cps... also did rotate, alignment and balancing... when i came to pick up my car, they said one of my rims oledi bengkok... i'm like so fast stock rims bengkok meh... im staying in pasir gudang and the road is not in the best condition... so my question is does the stock rim easily can bengkok and does the stiff suspension leads to it...

for gen2 cps owner... do u feel that the sound proofing is not good?? i mean i can hear the plane sound flying above me... those turboprop planes.... can hear bikes and car passing by...

so your staying in Pasir Gudang.. yeah.. that road got a lot of "lubang", I always drive slow slow there after my ex-Wira hit one of those lubang.. the rim bengkok kaw kaw straight away change all 4 rims

if the rim kena quite hard then there's a possibility of getting bengkok like mine.. in your case aiya better buy new sport rims la look nicer what..

yep make sense, the car should have been out of the factory for quite some time, going to pick up my car thanx fellas!

yeah im staying in pasing gudang... i realise the road condition like that so drive relax onli... dont see wats da point of driving fast if the road like that... lazy to change new rims, wait until get transfered back to kl... maybe change the tyre, quite noisy those silverstone tyre...

the tire shop tried to con u, it wont bend easily unless u hit a pathole.

Even u drive M5, u still can hear motobike or plane pass by...else ppl honk at u can't hear it and that's dangerous.

ive xperince those sound too...myb most of proton owner too

sportsrim osso can bengkok one.....get urself steel rims lah ...the solutions is always carefull on the road that un even n patient more

u can reduce outdoor noise by placing dynmat extreme on ur 4 door....thts wat i did.....but it will make ur car heavier la of coz.....mine..only done front 2 door and boot...just for ICE sake...

damn...y no ppl wana make extrator especially for CPS ar.....haih...wan change cam pullley also..need to change 2 cam pulley...no $$$$$

Well, at least they are the one that does the tinting and should know better. They will still tint my car if I insist but better be safe than sorry.

Usually the stock rim are JRD (not sure) that well known as a soft type.

Rims bengkok can fix one but not sure whether after fix it's good as before or not.. last time cost me about RM35 to fix it.. but this price is way back 2 or 3 years back..

that new guy resign ...........no 1 will suddenly appear behind me anymore.........