Wah3... Very nice.. Planing to install power amp and pre amp too... Hehe...   Under the seat the best solution to hide... 

Your component's tweeter, put back into the stock tweeter socket? where is the tweeter position facing?

then u may consider 4-2-1...
to be frank among the aftermarket header available in our market, i can say the Hotbits has the best bending among all. Look at the bend area it does not get smaller.

why not try the TESCO selling silicon type? only RM13.99/pc....i'm using that now using for 1 year d...still ok.

I'm more interested in visual in car entertainment these days... 

For performance, I've already change to K&N drop in. Others still standard. If I were to play with exhaust setup, the 1st thing is to remove the cat-con and replace it with bullet and changing the muffler to the twin-loop design. As for the header (extractor), I will used the R3 one because most of the header out there not suitable for CPS as the firing order is different from other engine (from what I read in a forum).

My car use 10W-40 syntium

BTW, somehow I feel my car lost a bit power after doing the 3rd service. Dont know why

What is fuel injection cleaner and engine oil treatment? Have any to the car performance?

Good morning all cps owners, I am the luckly no 33 . Please update me to the master list ; klia - twilight blue - 9677 - AT - PJ - waja cps.

Mutiara Damansara Platinum
1st - RM74.60 - Marh 5, oil filter, gasket & screen wash
2nd - RM99.27 - Syntium 800 15W/50, oil filter & gasket

Service Glenmarie
3rd - RM160.45 - Syntium 800 15W/50, oil filter, gasket, screen wash, spark plug & radiator coolant

Problem encountered refer to 1st page
1)  Frount fender squeezing sound - solved by lubricate stabilizer bar bush and tighten under carriage
2)  Allignment & balancing is out - its true and do it at outside workshop
3)  Buzzing sound - my car is at rpm 2600-2800, very iritating as this is my normal speed ma  . 2 times complaint at Mutiara Damansara but they can't solve it. Fortunately Service Glenmarie able to fix it by changing the drive shaft
4)  Wiper - no problem
5)  Air-cond compressor sound - no problem
6)  'Check engine' light - complaint on 1st & 2nd services, very funny is after 1000km service, the car just moving abt 2 min then the light 'on' again - pening. Luckily now don't face it anymore, may be engine already warm up so long liao   
7)  Power window failure - when close the that PW, heard 'klok klok', tangan gatal open it again to confirm the sound heard. The sound is confirm and nightmare also started, the glass is sick liao and cannot stand it anymore. Very sad is the sc need abt 5 days to get the stock (regulator) from PPC (proton spare part distribution centre) because they are no stock , due to security purposes i make a HUGE noice to the top management and finally they ONLY seriously look into it and called the vendor for the stock tomorrow  . Why the ineffiency of PPC can be continued to draw back reputation of Proton?

Anyway i still have 1 problem not yet settle, there is a 'pop' sound (continuouly but not so often) coming out from my back (seem to be). Firstly they say is due to the material of the waja's fuel tank is make of fibre so the tank will mengembang and mengecut  . I ask arround those waja owner (campro) and they don't have this problem so  i don't believe it. I sent to Glenmarie and they change the canister for me. But now it seem like happen again but not so loud and they said no problem for the new canister o   please advise. TQ in advance

Remember the problem I've got with my rear brake pad? Its caused both my rear tyre to be 'total lost'. Jusr bought Falken Ziex ZE912 205/50/16 for RM270 each.

My damaged tyres
[attachmentid=584536]

Cheap only, RM120 per pair complete with paint. Material is fiber. 

Eh, xenon headlight burn already? something wrong? The original bulb is from what brand?

---

Added on September 9, 2008, 11:47 pmwaja cps is using metal bracket or scissor type for the window?

That a good upgrade. 

Anyone notice that CPS got bigger exhaust piping than a normal 1.6 car. And the cat-con is also positioned further back, almost at the fuel tank.

A stereo just make hari raya promosi... The guy quote me rm420 for 4 channel amp audio quart + revenge digital pre-amp + installation... Is it worth..?

Already install..   Amp brand audio quad, 4 channel.. It state 2000 watts, but already told by the seller that it only produce 1000++ watts.. Together with revenge digital pre-amp. They already set the amp to produce the max of the speaker.. Also install the tweeter... The one with coil inside, heavier then the cheap one. Now the sound system already meet my taste.. But ONE DAY, will change all four speaker with better one. They also install a fuse for amp for free...  All together is RM450.. Hari raya promotion price...

hahaha i'm wondering how to test the leakage witout removing the tyre? ahaha

Try to open those china cap ayam brand amp. You will be surprise whats inside to make it 'heavier'. 

I'm also thinking to do soundproofing .... maybe toward year end... from what I heard, with soundproofing you dont even need to upgrade your standard stereo...

whuh... ...i think better stick with stock 1....just upgrade the speaker..im soo lazy too reach the button...change on the streering...get use to it oledi   ...

I wanna it too...   Can fit the round shape inlet eh? I thought at the market, large snorkel only have oval shape one, used by previous gen2.

My simple and cheap ICE... 

Woofer - http://i123.photobucket.com/albums/o285/pe...2CPS/woofer.jpg

Tweeter - http://i123.photobucket.com/albums/o285/pe...CPS/tweeter.jpg

Pre-amp - http://i123.photobucket.com/albums/o285/pe...2CPS/preamp.jpg

Amp - http://i123.photobucket.com/albums/o285/pe...gen2CPS/amp.jpg

Fuse - http://i123.photobucket.com/albums/o285/pe...en2CPS/fius.jpg

Still using stock HU and mid range speaker...

You can use pre-amp (if it installed) to put it down a little.