i bought mitsubishi heavy industries
according to the salesman its better that the mitsubhshi electric one...

1.0hp standard non inverter include basic installation- rm950
2.0hp standard non inverter include basic installatiion- rm2150
total rm3100

Will install this wednesday...

Is the price o.k?

Any one using York Cooling King M series with i-plasma? I planing to get 1.5hp. complete installation for RM1300. Please let me know the pros and con of this air con. Thanks

is that inverter type? where to get best deal for york ac anyway..?

Is non inverter, coz I'm using for less than 8 hour dayly...

i bought mitsubishi heavy industries
according to the salesman its better that the mitsubhshi electric one...

1.0hp standard non inverter include basic installation- rm950
2.0hp standard non inverter include basic installatiion- rm2150
total rm3100

Will install this wednesday...

Is the price o.k?

Is non inverter, coz I'm using for less than 8 hour dayly...

Hi bro,
is this the starmex model?

Where you bought those air conditioner??...

I'm not sure as I did not see any starmex branding on it. It just wrote mitsubishi heavy industries only...
In kota kemuning shah alam. Anything wrong?

Which shop in Kota Kemuning? I wanna go and have a look also. Starmex is normally written on the compressor and lower right of the indoor unit. I'm from nearby Bukit Tinggi.

I found a contractor done the conceal piping for 200 per unit. And i got Panasonic 1HP for 950 basic one..

---

Added on May 28, 2012, 11:39 amIf you keen to the air cond contractor, you can always check with their price and here is the contact. Mr. Tan 019-2249259 said Mr. Ong from Tmn Desa recommend. He can give you better price.

I hv called Tan, but he is not the best choice, so might not be selected.
Conceal piping for basic 1hp aircon is RM200 In market excluded installation fees

Hi,

I am renovating my apartment. My contractor before cutting my plaster ceiling assumed that there was enough space to fit a cassette type air con. Now that the plaster is exposed the height available from plaster to concrete slab is 9 inches.
The Panasonic we chose needs about 14 inches height so he recommended we create another drop down plaster in the middle of my plaster ceiling to accommodate the difference. I think it's going to look awful as we chose the cassette to give the place a stream lined look. Is there any cassette type brand anyone knows that will accommodate that minimal height ? I checked online and the brand Friedrich seems to have one at 9 1/4 inch but I can't seem to find anywhere in KL that sells it .

Please help !!!!

dry mode is actually the same as cool mode with one difference: the rotor will run extra slow. this has two effects: a) it makes operation more quiet and mostly b) it will give the air more time with the cooling fins. that way more moisture can be extracted from the air. this will lead to (my house, continous usage - never off) to approx. 10% less humidity in the air than the same temp. setting in cool mode.

this can be good or bad. i dont cool much (28° in almost all rooms) so i tend to have in excess of 65% humidity. using dry mode i can get around 60-65% which is ideal because it a) makes the air feel cooler than the same temp air with a higher humidity (save money) b) less noise c) 65% or less prevents mould and fungus growth and d) air never feels stuffy.

conclusion: all rooms have a/c set to dry 24/7 and create a pleasant environment. but yes, lower settings (probably 24 or so) will yield air that might be too dry. experient and see what suits you best. for me i find that malaysian air is always too humid. i prefer 65% humidity.

What is the model of Panasonic cassette that you have bought? The height should be on the body only. Panel will exposed, so that height shall not be calculated.

I have not seen the model for the air con as yet as I told the contractor not to bring it into the house and that I want to do some research on this rather then accept his word that there are no air cons out there that will fit.
I knw it should be 2 hp and he is saying he needs 14 inches of height to fit it in hence the need for another smaller drop down ceiling.
Do you know models that will fit that space ? If yes do let me know and I can speak to whomever who is selling it re the spec.
Thanks !

I am looking at the Panasonic FS series catalogue. 2HP inverter and non inverter cassette body height is 246mm. Panel is 45mm. Panel shall not be calculated in the depth. He might need to run drain pipes.