under repeater mode you can use password also..WEP, WPA, WPA2 anything..
so your competitor wont be able to use ..

don't understand your statement, but
it will only repeat oncel it locked on to the SSID locks on to channel and MAC address and once it gets DHCP assigned.

I just flash this router to v24 sp1 special



Got 1 customer ordered it :-)

How much u sell the buffalo it self???
I want to find that router

okay about the repeater

HOST AP is using 'HOTSPOT' ssid, and my repeater will repeat 'HOTSPOT'

what if my competitor put 'HOTSPOT' ssid nearer to my repeater AP ? Will my repeater repeat 'HOTSPOT' belongs to my competitor ?


I'll always use WDS, since in repeater mode , I can't track each AP ip address. SNMP graph is important and integration to Cacti or Nagios

it wont repeat your competitor signal as your router does not get DHCP from his router.

http://dd-wrt.com/wiki/index.php/Linking_Routers

Guys just follow this guide worait?

Comparisons

* Repeating Mode Comparisons
* Bridging Mode Comparisons

ahaa ok..at least clearing some clouds..thank you

My DDWRT v23 SNMP is enabled..and now I can track using Cacti ( screenshots http://mamakspot.blogspot.com/2008/11/cact...afip-is-up.html )

Brainslayer and few of his associates is now working on MadWiFi based on Atheros Chipset :-)

http://madwifi-project.org/wiki/news/20081...-project-domain

HI, i have a buffalo WHR-G125, flashed using ddwrtv24sp1

Problem details
First occurence of problem: 24/11/08
Problem description:


All my router's back light lighted up... it happends just around 2 months after i flash my router to ddwrt...

see pic:


And even i connect LAN cable to the port, and to my PC, window will just treat it as unplugged... .

I also tried to hold reset button for near a minute... unplug... hold reset... plug in... still the same, not working....

Usually the DIAG light will blink during boot up... but now it won't

I don't think it's the firmware's fault... but anyway... any body here can help?

Direct tftp to the router? when powered up?

i'm using repeater bridge mode. i can access to primary router through connection to the secondary router. however, i cant dial my internet connection when connecting through 2nd router. anyone can help?

Of course 2nd router cannot dial :-)

1st dial

Try link them using WDS

You can read all info in here

http://www.dd-wrt.com/wiki/index.php/Tutorials

let me rephrase my sentence. when my computer connected to 1st router(bridge mode, not auto connect to streamyx), i can dial connection to streamyx from my computer, but when my computer connected to 2nd router(set to repeater bridge mode), i cant dial to streamyx from my computer. it seems like cant open the wat WAN port thingy. is it really cant dial from my computer through 2nd router?

This post has been edited by francistcc: Nov 30 2008, 09:54 PM

Let me rephrase you again :-)

Use WDS function

1st Router ppoe ( Connected to the Internet Auto Dialer )

WDS Settings Mac Address 2nd router and in the second router put Mac address wireless for the first one

If you cannot follow this guide. God will help you .

Please try suggestions from here, maybe will work. I recovered my WRT54GL last time.

http://www.dd-wrt.com/wiki/index.php/Recov...rom_a_Bad_Flash

ic.. means tat WDS only can use for pppoe auto dialer mode and cant be use for bridge mode rite?. sigh... thanks anyway

i have this minor problem.
i cannot surf the net when i set my ip manually, but i can log in to the router
i didnt set any access restriction and of course my manual ip is valid one.
is there setting to disable surfing when use manual ip?
Firmware: DD-WRT v24 (05/20/08) std

ur router is dead. I also bricked my first buffalo whrg125 long time b4.


you can try ppoe relay function


set the dns manually also. Can use streamyx dns server.

I plan to get a new wireless router soon, which one is recommended, that can support DDWRT?