so happy that i had succesfully flash my wrt54g v5 with micro dd-wrt version...

at 1st got problem TFTP the firmware up.. then found a guide... hehehe

""Once you have the IP addressing assigned, start the TFTP CLIENT, give it the address of the WRT54G fill in the default password ("admin") point it to the flash image and choose binary mode if given the option. The goal is to get it already to make the connection with the push of a button.

Next is to do a hard reset on the linksys. Hold down the reset button on the back for 30 seconds. While still holding it down, unplug the unit from another 30 seconds. Plug it back in. Immediately release the reset button and start the TFTP upload.

It should show progress pretty quickly. If it fails, try starting it again. If that fails, try the reset cycle again and try adjusting your timing ( both shorter and longer) between restoring the power and starting the upload.

Once you have a successful upload, the box should reboot. Try accessing the web interface. It may take a while (30+ seconds) the first time. If it doesn't work. Try power cycling or resetting the box.""

it really works!!! wahahahah

now set is as repeater and works like charm

1 of my customer experiencing blinking problems power blinking and all lan power up . First case happening since using dd-wrt. Manage to swap one to one,flash again and works charmly until now

another one

Power blinking, but still can access internet, both in the past 4 weeks, still rectifying the problems with the customer, if problem persist will RMA, because item still in warranty period.

Suspecting firmware debricking or overboost transmit power advice turning off the router let it ress maybe same case like Buffalo

This post has been edited by MX510: Dec 17 2008, 11:17 PM

what happen if my linksys having blinking power lamp?
suddenly..i also dunno why

MX510 , guess you're a DD-WRT addict now eh ?. Things have changed. I remember our last conversation 2-3 years back when you were afraid to flash your WRT54GS !

Hehehe indeed i am :-) all my hotspot project are using DD-WRT based firmware, for high end project we use Senao hopefully future firmware support Atheros Chipset :-). Anyway thank you to you for introducing me this firmware 3 years ago :-). Anyway special version v24 sp1 is the best now.

anyone?

can someone recommend me a Wireless N + router that support WRT?

must be available in Lowyat/DMall

Linksys WRT300N

only the old version rev1 work with wrt

those rev 1.1 & 2 not supported...

http://www.dd-wrt.com/wiki/index.php/Linksys_WRT300N


anything else?

Just get a Asus WL-520GC and flash with DD-WRT, it works great.

you can try WRT150N. But the antenna connector is not attachable.

i just flash dd-wrt v24 sp1 special on my buffalo .
some question for the QoS setting.
i confuse about the QoS setting and default bandwidth level.

i should fill in 512 up 1024 down or 48kB up 180 down something like this?

another question is , after i switch on the QoS, and set the http services to express.
after the setting, the response become slow, even though i enter the console menu also take a half minutes , what is the problems?
so now i turn the QoS off again, then everything go back to normal .
no more slow response.


==============

latest update, before the reset , there were no problem for entering the console, but still slow connection to the website.(even lowyat.net)

but after everything turn into default dd-wrt setting.(off course with the pppoe setting)
i didn't make any change, no wds no qos, super speed now.

can some one tell me what happen?

This post has been edited by locolyric: Jan 6 2009, 01:07 AM

Reduce your transmit power to 10mW due to some buffalo router have amplifier built in :-) should

Just done flashing my dir -300

my desktop cant access the wireless

after i entered the security key , it stated connected

but no ping nor ie loading

i have no problem accessing with my phone

is it with the type of security supoorted ? like wpa wep wpa2

Pls refer to wikipedia page of dd-wrt in dd-wrt.com

I will be testing this Senao Products it works with DD-WRT ( requires activation )



EnGenius EOC-2610

Features:

* High 600mW 802.11b/g Wireless Power
o Ensures robust signal to overcome long distances
o Offers superior WiFi coverage than leading brands
* Signal Strength LED Indicator
o Allows network installer for easy deployment
* Dual Antenna Design
o Embedded 10dBi panel antenna with external connector for optional omni antenna
o Perfect for both Point-to-Point and Point-to-MultiPoint applications
* Power-over-Ethernet (24V PoE) Capable
o Less heat dissipation to ensure reliable performance
o Capable of 300 feet PoE cable length
o Power Injector Included
* SuperG 108Mbps Support
o Enables high transfer speed ideal for multimedia applications (with SuperG Client)

Datasheet: http://www.engeniustech.com/resources/EOC-...20Datasheet.pdf



This post has been edited by MX510: Jan 26 2009, 11:44 AM

That's impressive man!

How much is this baby worth?

1K plus those AP are on the way :-) will updates this thread soon . Anyone wanted to order can buy it from me

i m using linksys WRT54GL 1.1?..i am currently using v24 mini..i would like to upgrade to the v24 sp1..should i go for the standard or mini?whats the difference?thank you

This post has been edited by dj2004: Feb 2 2009, 12:26 AM

From mini,pls reset button to clear factory settings, than flash to standard. The differences is the firmware for standard more features available

Dear All, can I know what is bridge mode? Cause currently I'm using a wireless router with another modem. Is it better to use bridge mode. Thanks