just go for any X48 mobo if you wanna grab new mobo.
chipset will be running cooler by then.

hmm only rampage formula and gaygaybyte X48 seems to support DDR2

but looking at the way ppl are overlclocking.. i think better not..

@albert
bro how ur oc on dis mobo wit ur e84?can go highest clock with wat vcore?if stock vcore can go how high?vdrop how much with ur e84 runing on dis mobo?

I guess the vdrop & vdroop is almost as 65nm C2D

here is the vmod, good news for those C2Q user





btw, below is the screenie for DK X38





This post has been edited by gsan: Mar 1 2008, 10:27 AM

hehe sum update for my dk oced wit e84..its on stock vcore

Wow! Nice OC for stock clock!

What cooler did you use for the NB?

thx bro..will do more after dis..wanna burn in abit more..then gonna try 445x9..hehehe btw im using Swiftech NB cooler bro

Not really actually... but when you are very afraid that TNB might play a trick with you... eventually the 3 minutes felt like 15 minutes

But the "waiting time" is one of a hell

13/02/08 tu Beta

look at the NB cooler

err...who want my DK P35??!!
just kidding

my highest i can go so far is around 460-470 x8(not really remember..at home right now)will post some ss for all...but not orthos yet..just pass super pi 32M...

@gsan
that ur new x38 mobo???


mantap2...my next target...

this is a vmod alrite...but not vdroop mod, which i'm dying (well,not really la... ) to have...
it will increase the vcore even on default setting and will put a lot of stress on other hardware - cpu included;especially on the mosfet.
i think i'll stick with current crazy vdroop...

This post has been edited by remysix: Mar 1 2008, 05:47 PM

@mfcm, how you change the multi to x8.5???

my dk only allowed 6-7-8-9 multi.

rgds

---

Added on March 1, 2008, 10:32 pmi'm just running this E8400+DK to 425x8=3.4Ghz, stock vcore-1.1375v(bios), load-1.120v , vdimm-2.0v, nb core-1.33v, ht link-1.08v.

so far running ortho , small fft, large, and blend, more then 4hours each without error.

*i had try 4ghz before, 450x9=4.050ghz, with 1.32v, running occt 30min pass, prime 1hour also pass,
but then dota for 2hours giving me a reboot.

This post has been edited by overclockalbert: Mar 1 2008, 10:32 PM

there one option there u need to enable..its N/2 iinm..dunno previous bios or not..but mine got.bios 24/12

aiyoyo no board for me to play yet oh. Wonder how many times I type out this sentense already

no wonder lah, i'm still using the 31/10/2007 bios.

how you do the bios flashing? using floppy disc?
can show me step by step? i don't wanna get in to trouble here.


rgds

yeah i think previous bios dont hv..u can use winflash.im using winflash oso.thres guide for it in dfi website..jus caution make sure u didnt hv electricity prob while do it..gud luck bro

What FPO?I want to know,will lookout for these type of gem.

its Q746A512..btw check this out more



tried to use 1.232v load for 445x9..but failed after 5hours 45min prime so up abit vcore to 1.264 set in bios n idle..1.248v load for 12hours 40min prime

Why such a low OC? Don't waste your E8400, OC higher!!!!

I flashed my P35-DS3 using boot disk but still kaput. Apparently the mobo had issues with BIOS flashing.... version 1.0..... now RMA, hopefully they give me the newest version!!!

nice result here try to push it kaw kaw