Early bios=Buggy so in future,we should see +/- 490fsb off irenic rig

on load or idle?

if on load then its normal la...

haha.. so its the mobo that prevents clocking higher?... wondering whats the vcore if 8x500fsb... can't wait to grab one myself... but lots of problems atm... need wc parts + need new casing...

i dun think so.. but i believe the wall is just around the corner.. currently i can boot up till 487fsb but it's so unstable coz i havent try higher' and more aggresive voltage yet btw now back to my bz life .. so most probably at the end of the week only got time to play

whats the current highest stable clock vcore ?

Whats the highest the X3350 can go on air cooling?

probably 3.8GHz... with the 8x multi..

well for PI and 3Dmark, the vcore i used is up to 1.35v

with a right setting and other hardwares, u can hit around 3.75ghz for benchmark.. in my case 3.6Ghz is the ideal speed for 24/7 bcoz I can use quite low voltage setting..

vcore 1.2
vpll 1.5
vfsb 1.2
vnb 1.31
vdimm (1800) 1.8v

irenic bro using what cooling?...

aw crap, mine is 3.2 and already need 1.225 vcore for 24 hr orthos

wonder which mobo is best for yorkfield? may sell off my ep35-ds3 for something else next month

whats the VID of ur X3350? my q9450 VID is 1.25v.. Im currently running at stock speed at 1.09v vcore...

This post has been edited by IcEMoCHa: Jun 5 2008, 01:09 PM


Attached thumbnail(s)

ordinary wc kit..

well maybe ds3 is not sufficient to optimize ur quad core ocability..

finaly we got to see ur screenshot

can give the specs ar?...

i posted at the Intel® Core™2 Duo/Quad Overhauled Rev. 4 thread yesterday hahaha...

This post has been edited by IcEMoCHa: Jun 5 2008, 03:09 PM

mobo settings are all at default, except CPU voltage control 1.225V. CoreTemp's VID seems bugged though.


Attached thumbnail(s)

hehe a very2 ordinary cooler i bet none of u wanna buy it.. but i've to use it. what to do.. but the good thing is, the performance is quite good and i'm satisfy with it..


not bad what..

OK...

Got any tips on which RAM brand to use? Planning to sell my value RAM sticks soon.

crucial ballistix now seems very cheap edi.. and very worth it

Hmm ballistix at 375/4gb seems pretty sweet, but not lehteck selling, otherwise can pick up on the spot, same college

Thanks anyway.

This post has been edited by yimingwuzere: Jun 5 2008, 05:22 PM

bros. something weird happen when i was recovering from a bad oc yesterday. i just reset the cmos. so i was gonna oc again. i went to the cpu details or something. wanna disable the c1e and IEST when suddenly i saw my core was at 4.2 GHz . I am using a e8200 only . so its really weird. plus i saw Hyper-Threading is enabled .... is this even rite? i dont remember e8200 support HT can some1 shed some light.. tq

Some OC of my new Q9550
3DMark 06

Prime Test


now trying lower the vcore and fine tuning the GTL values... more updates to come...