Silver Conductive Ink Pen

ya if u got conductive pen, that's the best. Or go for the all cheapo way, use kitchen foil + glue

conductive pen how to get bro?? buy from hardware shop or ..... tx

i found tat my e2160 modded cannot get higher than 2.8 at msi p35 neo f mobo,while a original e2160 can go above 3.0 on it,so...after modded will block the potential of overclock ?

This post has been edited by xk2: Apr 19 2008, 02:20 AM

conductive pen aint cheap, at least like rm80 or something

are you comparing stock & modded on the particular e2160 on ur P35? u don need to BSEL mod for P35, unless u wanna it to boot @ 266fsb everytime

my fren got an e2160 which is put on p35,it can overclock to 2.88 daily use,then i wan to see my modded e2160 if put on p35 can overclock more than 2.88 or not,but the result is cannot ,it only manage to archieve 2.6 but in msi 945gc board,my modded e2160 manage to get 2.6ghz no problem,so i think it is not suitable to put a modded e2160 to p35 chipset

cannot wait to test my modded e2160 on my asrock wolfdale1333 board i have all hardware (proc+ram+mobo+ gc) in hand now but the casing and psu all in hometown

This post has been edited by xk2: Apr 21 2008, 05:04 PM

not suitable to put e2160 on p35 chipset?
if then how my e2160 did 3ghz on my gaygaybyte?

ur friend e2160 != your e2160.
Its not the same, not all CPU with same overclockability.

In that case, your not having the CPU as the controlled factor. Pop ur fren's cpu n i'm sure it will do 2.88ghz on your board (assuming ur board isnt the limiting factor)

ditto, well said

conductive pen is rm 80/90 ??? wow, better go get new mb...

where can i get full tutorial of bsel mod? seems interesting

can google and easy to find...for 2140 need to connect 2 times and wondr how to do as so small...how the taikos here do it ?? pit aluminium foil how to put???so small!!

u can read HERE. sure la it's possible to do, else we wont be reporting here

Well.. i can always help out on the "kitchen foil mod", for a fee of course

Anyway... for the 945GC based mobos, u only need the 266MHz BSEL mod as you'll be overclocking the chipset to 333MHz FSB, instead of making the chip think it's a 333MHz FSB processor.

I so far have no luck whatsoever with getting my BSEL modded to work in P35 chipsets though, have to remove it only it'll boot in my P35 motherboard(s) but it works wonderful on my 945GC motherboard(s).

i want e2xxx cpu.... gonna rejoin the budget team soon ._.'"

I actually BSEL'd my Celeron 420 with a small strand of silver wire. Hahah...

guys..im using E2160 n abit I-N73HD mobo..n i wanna try OC..what is the most stable speed i need to increase?since multiplier is locked at max 9,can lower only..

This post has been edited by geniousboy: Apr 23 2008, 08:27 AM

bro kuchingfight, can just do the bsel and can run 350 fsb ? heard that got bsel to 266...that one safer ....

---

Added on April 24, 2008, 11:20 pmbro kuchingfight, can just do the bsel and can run 350 fsb ? heard that got bsel to 266...that one safer ....

This post has been edited by ronho: Apr 24 2008, 11:20 PM

geniousboy, no one will know how far you can OC.
ronho, you answer will be same like geniousboy's Q.

E2160 is meant to run at 1.6ghz, Intel never gurantee how far it can overclock.
Some E2160 max out at 333fsb, which is 3ghz, some max out at 350fsb.....
some even max out at 300fsb only.

So do you guys get it? Not all CPU manufactured have the same overclockability.
If so, why people busy looking for stepping, reading review, etc?

No free lunch dude.

ronho, u have 2 understand the purpose of the BSEL mod. It's to 'fool' the NB strap so it doesnt limit prematurely. the 945GC is only good on 266fsb. from there onwards, manually adjust the fsb till ur cpu maxes out@ stock vcore

cool down la bro..they are learning..

yeah..we are learning..im just asking..dont have to get emotional..btw,thanx for ur info..i'll try myself after this.