bro, use what to bsel?? heard some pen but buy where and what name?? some rear demister thing???? whrer???  txtx

conductive pen how to get bro?? buy from hardware shop or .....  tx

i found tat my e2160 modded cannot get higher than 2.8 at msi p35 neo f mobo,while a original e2160 can go above 3.0 on it,so...after modded will block the potential of overclock ?

my fren got an e2160 which is put on p35,it can overclock to 2.88 daily use,then i wan to see my modded e2160 if put on p35 can overclock more than 2.88 or not,but the result is cannot ,it only manage to archieve 2.6   but in msi 945gc board,my modded e2160 manage to get 2.6ghz no problem,so i think it is not suitable to put an e2160 to p35 chipset

cannot wait to test my modded e2160 on my asrock wolfdale1333 board i have all hardware (proc+ram+mobo+ gc) in hand now but the casing and psu all in hometown

not suitable to put e2160 on p35 chipset?
if then how my e2160 did 3ghz on my gaygaybyte?

ur friend e2160 != your e2160.
Its not the same, not all CPU with same overclockability.

can google and easy to find...for 2140 need to connect 2  times and wondr how to do as so small...how the taikos here do it ?? pit aluminium foil how to put???so small!!

bro kuchingfight, can just do the bsel and can run 350 fsb ? heard that got bsel to 266...that one safer ....

---

Added on April 24, 2008, 11:20 pmbro kuchingfight, can just do the bsel and can run 350 fsb ? heard that got bsel to 266...that one safer ....

geniousboy, no one will know how far you can OC.
ronho, you answer will be same like geniousboy's Q.

E2160 is meant to run at 1.6ghz, Intel never gurantee how far it can overclock.
Some E2160 max out at 333fsb, which is 3ghz, some max out at 350fsb.....
some even max out at 300fsb only.

So do you guys get it? Not all CPU manufactured have the same overclockability.
If so, why people busy looking for stepping, reading review, etc?

No free lunch dude.

Of course YES

aha, dumd of me to forget this thread---even got some posts here.. ..managed to get 1 MSIn945 board and was surprised to be able to oc as the old biostar mb was a non ocer. e2180 went to 275 fsb (not yet push) and will report here later...funny that after bsel, the mb did not see the 266 fsb--so maybe didn't work...so its 200fsb direct to 275 fsb...if don't do bsel, what's the max possible???? tx 

i wanna play budget pc alsooo...!! How is the celly for ocing... is it worth.. also what board can do 500Mhz for a celly?