Here are some information about 'super budget overclock' platform..


the board use in this review is a conroe1333 with DVI,the non DVI version is much more cheaper and i think the performance should be same,i oredi get my ' Wolfdale1333 d667' in Thunder Match at only RM145 ,tis board will pair with my e2160 modded,i not yet have the chance to test the performance due to my other parts is located in my hometown,only can look at the mobo and proc everyday and imagine myself




the pricelist state 'Conroe1333 d667', but the stock they selling is actually 'Wolfdale1333 d667'...i think the performance is same

i'm seeing quite a number of celeron ocers nowadays.. what's the average oc on those?

does this means a 1066fsb capable mobo can be oc to 1066fsb++ without any problems or limitations?

The 1066Mhz and 1333Mhz spec's refer to the memory speed's that the mobo is capable of supporting....you can change the FSB speeds by changing the processor multiple setting in BIOS (if its not locked)

then can the multiplier for e2180 can be changed??

Of course YES

and to add, only downwards..not bi-wards

.5 multiplier only penryn can.

the max multiplier for e2180 is 10x only rite??

did bsel on my 2140 and now running at 266fsb..biostar p4m900 cannot adjust the fsb from bios...anyone can give ideas how to?? adjust fsb 300 in bios but when boot up still says 266fsb only..???

clockgen perhaps?
not all chipset capable of running high fsb anywat

i just know about this thread, finished read all posts here, thanks guys
will get a E2140+stock HSF mybe next week, and get a decent 945 chipset mobo, n try to oc it, hopefully can get a good result

btw, a little silly question, is it a must we check with ohm meter after do bsel before put in the proc onto the mobo? coz i read in 1 site saying that (they r not saying it must, but they stated about it)

No. Just do the mod to connect the pins that need to be connected.

What ur max fsb before doing bsel mod?

bro, before bsel only 200fsb---set in sofrware but does not change...feb increase only after bsel...maybe mb constraints ??

no i mean max oc....

bro, cannot oc from bios...so where got max oc? can bsel then fsb266...else fsb200 only. Bios got settings but not work one...tx

It is advisable, if you have a multimeter to check the connectivity of the connection before plugging in, just to be on the safe side.

aha, dumd of me to forget this thread---even got some posts here.. ..managed to get 1 MSIn945 board and was surprised to be able to oc as the old biostar mb was a non ocer. e2180 went to 275 fsb (not yet push) and will report here later...funny that after bsel, the mb did not see the 266 fsb--so maybe didn't work...so its 200fsb direct to 275 fsb...if don't do bsel, what's the max possible???? tx

i wanna play budget pc alsooo...!! How is the celly for ocing... is it worth.. also what board can do 500Mhz for a celly?