go grab dblooi while stock last... haha.. childish?? so mean.. thinking before throw out..

i never wanna complain about your lovely board...
business? i sell board even cheaper than dealer price....
childish? just different point of view bro...
i said sorry .. tat no enough huh

no need to feel guilty,
no need to create war..
we are all learning,
corect the other guy mistake, n accept the critism is normal..

that the formula..

Don't worry, board manufacturers have learnt from their mistake during the K7 & early P4 era (they lost a lot of money cos had tons of RMA claims). Even Abit changed to using 100% Rubycon caps starting with the NF7 boards (those are good & costly caps, very hard to get in malaysia, usually need special order). Cap leaks/failures are now quite rare, and are pretty much impossible on solid state caps (which cost up to 5-10 times more than normal electrolytic caps).

For me, the only thing I don't like about biostar is most of their current boards are fairly limited in vdimm options, and early BIOS often not very good, modded bios is often required to do good OCing (later BIOS fixes this to some extent). But love the Tforce series UV components, and they're decently priced and still have good OC options.

Ok. Enough for that discussion.
No point having one topic to have this thread to become war thread.

Thanks

-pWs-

Sorry, pWs.
I want to overclock my cpu AMD 64x2 5600.
Can any pros provide some advice or guideline?

Mobo : Asus M2N-E
Ram : 3x1Gb Corsair DDR2 667mhz
Graphic : Gigabyte 8800GT 512mb

No need to fight. Its new year eve, time to drink beer and cheers,

hehe then do i need bring my CPU go u there??

BTW happy near year eve

This post has been edited by tachlio: Dec 31 2007, 11:32 PM

May I know your stock Vcore?
Show us CPU-z screenie?? [CPU and Mem Tab]

And lastly, Happy New Year to all AM2/AM2+ Overclocker

-pWs-

pWs, my CPU-z screenie...


HAPPY NEW YEAR 2008 !!!

This post has been edited by lee1767: Jan 1 2008, 12:08 AM


Attached thumbnail(s)

happy new year tachlio
yeah you wanna come my place also can
and that should be better

@lee1767

1. Lower down your HT Link Multi to x4
2. Use Ram Divider 533MHz
3. Set Vcore = 1.25v
4. Set Vdimm = 1.8v
5. Ram Timing 5-5-5-18-23-2T
6. Increase HTT
7. Boot in windows. If booted, use Orthos to test stability. Check Temperature as well using CoreTemp
--> If stable, go back to step 6 again.
--> If not, proceed to step 8.
8. Increase one step of Vcore.
--> Go back to step 7 again.

If still cannot, attach some screenies here. We got a lot of people to help you here.

-pWs-

pWs, do I need any kind of software to do the settings?
My cpu only has the stock cooler fan, do I need to change for the better cooler
before start to overclock it?

2008 1 1 1st post

Trial on 400HTT, not finetune yet.... (refer screeny for various settings)
Pass SuperPi 1M but results sux in Vista (32sec, malu nak post SPI screeny )

Running Orthos now with Thermalright Ultra-90 + Delta 92mm air cool

---

Added on January 1, 2008, 7:03 ambro db, DFI won't stop at 360HTT lah

This post has been edited by ongbs: Jan 1 2008, 07:14 AM


Attached thumbnail(s)

happy new year to ALL.

and thanx for sifu ongbs for his test..hehehhe

The setting can be done it in BIOS.
Please read some FAQ before overclocking.

-pWs-

thousands apologies ,
just a wild guess from me

This post has been edited by dblooi: Jan 1 2008, 02:02 PM

2.3v bro
btw those just fake only not stable at all

Heppi new year all!

Thanks to bro CV and dblooi now can orthos stable thought only at 3.2
my board or the ram (not sure) didnt like loose timing just like CV said,when loose timing 5-5-5-15 at divider 400 the board wont boot....dunno why..i think this is the cause prime always fail lol



This post has been edited by yeop: Jan 1 2008, 02:36 PM

I think you better to have your stock chipset hs changed

-pWs-

bro u put heatsink on the caps ah?