what vcore u need for that prime =.= is it 1.5?
good clock

This post has been edited by cyberloner: Dec 18 2007, 12:43 AM

w/o oc consumes less electricity

that line have problem...
even with stock clock.. some cpu also eat all da power too... like old p4 ht
no clock in stock like turtle pc for me now when using oc system... after so many years...
my own opinion is use the oc system is far far more better than stock..
electric bill different for month maybe 10 ringgit only... but performance is twice the speed.... of stock..

if you dun prime 24 hours daily .. it use not much electric too even pump to voltage 2 volt... no heavy use ... it won't use power...

just share my point =)

---

Added on December 18, 2007, 3:55 pmuit tachlio bro... can try prime 1 hours and check your pwm temp for me at 3.4 and 1.45 vcore?
thanks

This post has been edited by cyberloner: Dec 18 2007, 03:57 PM

hi bios pro... mind to edit an9 bios to be red background? =)
for amd cpu u always can check here
http://products.amd.com/en-us/DesktopCPUFilter.aspx

yes it stated as F3 in 45watt =)

Processor AMD Athlon(tm) 64
Model Number LE-1600
Frequency (MHZ) 2200
L2 Cache Size (KB) 1024
Socket AM2
Stepping F3
Manufacturing Tech (CMOS) 90nm SOI
Wattage (W) 45 W
System Bus (MHZ) 2000

Cool stuff

why dun go try the hwmonitor?
listed in ocmania.com download -> system monitoring... hwmonitor
the best monitor that support abit uguru aswell =)

cannot stable over 3.45?
i just change the an9 ver 1.0 to an9 ver 1.10...
hope it helps me clock more more =)

from what i tested... i know it is not ram limit me... but the cooling is the one ...

we are going no where around 3.4x with air cooling...
but at this speed is the most stable clock the cpu can gain....
i can boot to windows with 3500mhz but cannot even prime...
pump more vcore... pc auto shutdown...
from my exp .. that is abit uguru is protecting me from killing the cpu by direct shut down the pc... the cpu temp cannot maintain at certain level...
and it direct jump to to the cpu limit set in bios... something like your temp is 60'C and sudden go to 80'C

only water cooling can go beyond that limit with unstable system in high clock =P

are u lapping your cpu?
put the sand paper on the mirror or glass.... and lap it (read from a guide in ocmania)
that is the perfect contact u can get... but i never done it before...
it will be awesome if someone can show any different temp between lap or not lap ... =)

3.6 Vcore? u crazy?
1.5 vcore my pc wanna meletup doh...
if using 3.6 what heatsink that one might be? @@

---

Added on December 19, 2007, 6:37 pmAutosol?

This post has been edited by cyberloner: Dec 19 2007, 06:37 PM

有你代表可以了啊 哈哈
China now is cool weather ... they have better and nice place to play the toy =P
also got free negative temperature air-cond

This post has been edited by cyberloner: Dec 19 2007, 09:36 PM

all 6000+ is F3 cpu with same stepping with the dblooi
but default 3ghz and 2mb cache .... =P

---

Added on December 20, 2007, 2:50 amcannot detect that cpu on the market yet... it is available now?
if using 45watt cpu... maybe it is cooler...

This post has been edited by cyberloner: Dec 20 2007, 02:51 AM

direct go get 6400+ guarantee clock 99 ...
all amd top cpu mostly are picked before dblooi version .. hehe
all cpu comes in batch and preselected and assign the clock

maybe i sell this cpu if got phenom choice in future but not now..
looks like 9600 phenom black edition is a solid choice to buy
oc hits 3ghz stable...

still got that issue in b2 core...
they disable the TLB errata to gain that speed...
only B3 core in Q1 2008 is gonna release without that bug...
that's all i read ...
hope AMD do comes back ....
personally never touch phenom before

image quality actually ati is the king... well known ATI
high fps nvidia is the king...
lower cpu usage for hddvd / bluray playing... even mpeg2... ati is the king...
less driver issue is ATI...
always driver problem nvidia...

i am nvidia user and ati user before... that's what i know...

---

Added on December 22, 2007, 12:46 ami think u dun even need to pump vcore on that speed..

This post has been edited by cyberloner: Dec 22 2007, 12:46 AM

My last stable overclock to use 24 hours /7 days
vore 1.475... wrong reading from cpu-z

This post has been edited by cyberloner: Dec 22 2007, 02:10 AM


Attached thumbnail(s)

consider low for me... hehe
yup plan use this for 24 hours... no shut down....
normal use... never reach that heat also....

amd cpu have the limit... pushing more vcore that doesn't even help improve the stability of it means u just hit the wall....
u can drop the clock and prime until u can find the stable clock it can support...
drop vcore slowly and prime to find the best vcore for it....
i already tested a lot 4000+ and they almost dun like to climb to 3ghz stage....

5000+ black edition might be the nice upgrade to gain 3.2ghz with multiplier change to 16x
i just tested 5000+ just now and it can even go to windows with 3.0ghz without adding vcore but no futher test...
3.2ghz can boot with default vcore but blue screen at windows means it want more more vcore


This post has been edited by cyberloner: Dec 22 2007, 04:30 AM

my cpu cannot gain any stability over 3.4.... any other push will prime fail...
cannot boot to 3.5 but pc also shut down.... must be heatsink cannot tahan sudden peak of temp...

i think b1 and b2 is da same cpu... only b2 can clock higher only...
the cpu cache latency for both is same speed....

wait i rich 1st hehe...
black edition temp reading is also wrong from what i know =X
but someone manage to clock it to 3.4 ... i dunno that is stable clock or not =X

the latency is more giving it to clock more higher....
same as ram latency... u may see why ddr3 latency so high with higher mhz...
it is due to 65nm technologies...
more smaller capacitor less heat...

This post has been edited by cyberloner: Dec 22 2007, 10:38 PM

opps sorry .... oc till stim.. @@