u should have a lot space to move on man~

G1 could hit 2.7~2.8 easily

u using ddr800 devider?

prepare to boom ur Proc or Ram anytime dude~~

better play safe la~~

he using 533 devider

Wonder why i using 667 devider @ 10multiper, it cant boot even at 260 bus speed

but when i lower the multiple to 9.5 it can boot even at 336 bus speed@ 3.2Ghz but the super pi is damm slow only 36s@1m

after that i try lower again to 9 multiple @ 336 bus speed @ 3.0Ghz, the SP result is better than 9.5 multiple @ 30s@1m

BTW the MAL ,Trd n other timing how to set is better?

try 533 devider nw~

lazy to tune the timing ~ try push more 3.4@1.45vore.

Target is 3.5 with lowest vcore

---

Added on December 18, 2007, 10:45 amok i try it later~~

---

Added on December 18, 2007, 10:58 amfinally get 3.5 @ 1.5vore~~

try tune the ram nw~

BTW why my SP cant show the 26.xxx d??

can someone teach me??



This post has been edited by tachlio: Dec 18 2007, 10:58 AM

having problem to set at 667 divider @ 10 multiple even 270busspeed also cant

And decide for daily use at 3.0Ghz, later got time cont tune the ram~

@-pWs-

pls update mine

Windsor 3800x2 F3 | Tachlio | DFI Ultra M2 | Micron OEM DDR2 800 | TT BTVX



This post has been edited by tachlio: Dec 18 2007, 12:33 PM

i using XP bro~

the theme is mod ady~

i don know hw to check pwm temp la~~

3rd party software can check?
Any DFI user can help?

i dont think so also coz it not floating too much~

might share ur SS at that speed?

i dont think ur ram is limit u so much~

Bro pls update mine ~ for stable use

Windsor 3800x2 F3 | Tachlio | DFI Ultra M2 | Micron OEM DDR2 800 | 1000 @ 667 Divder | 5-5-4-12-2T | TT BTVX



This post has been edited by tachlio: Dec 22 2007, 11:32 AM

Wonder why i using 667 devider @ 10multiper, it cant boot even at 260 bus speed

but when i lower the multiple to 9.5 it can boot even at 336 bus speed@ 3.2Ghz but the super pi is damm slow only 36s@1m

after that i try lower again to 9 multiple @ 336 bus speed @ 3.0Ghz, the SP result is better than 9.5 multiple @ 30s@1m

BTW the MAL ,Trd n other timing how to set is better?

don know why i set 1.275vcore got got problem when load to window~

so i set to 1.3 it is ok~

later when have time i try again~ coz the ram i still no time to tweak yet all direct choose loosen 1st

ya using the Modded bios by -pWs-

don know why 667@10 mutiple stuck at 260 busspeed only~

BTW the Trfc for each ram, Mal, refresh mode N trd how to choose when start OC?

This post has been edited by tachlio: Dec 22 2007, 12:05 PM

667 lolz~

it can do 336x9.5 n 336 x9 but cant even pass 260x10

ya 533 can even OC till 3.5@10 mutiple no problem

---

Added on December 22, 2007, 12:59 pmya...

will ram timing affect it??

coz i set too loose?

This post has been edited by tachlio: Dec 22 2007, 12:59 PM

All sift here i got one question regarding the 8 pin ~

My new GC need 8 pin to support it~

but i have check my PSU it has 8 pin but manual write it is a 8pin Processor Power Connector..

I do check pic for GC 8 pin the pic show same as what i having nw~

My question is do i can use this 8pin Processor Power connector on my GC?

Do it is same?

Bro can v chat more detail on this ~

Dont wan OT too much

my msn : tachlio@hotmail.com


I'm trying to get a pin-out of the 8-Pin PCI-E connector for those of us who would rather make one than buy one, or who can't find one to buy (if anyone knows where to buy one, that would be good too).

So far, I have the original 6-pin pin-out thanks to our own W1zzard!
here's my more in-depth version, albeit made in paint...


Here's what I have on 8-pin so far, I don't know what the rails are, but the shape of the pins is a start...



After further research and ample time of the cards that require these being released, the diagram I made was found to be wrong. I used a picture of a 6 to 8 pin adapter, and that company must have color coded the wires incorrectly. Thanks to KennyT772 we have an up-to-date, CORRECT diagram.


Source

Have anyone try ground the another 2pin using the 6pin Power connector ?

This post has been edited by tachlio: Dec 26 2007, 12:54 AM

For your answer : No

This post has been edited by tachlio: Dec 26 2007, 12:33 AM