maybe its time to go for watercooling?? following AoiNatsume steps??
i thought got improvement for the later proc?? inaccurated temp readings solved??

..........Anyway i can boot up at 3.0Ghz but cant pass orthos test and SuperPI test... i am wicked sick.

bro, add me to ur list...

3500+@ 2750Mhz | Milo_77 | M2N32 SLI Deluxe | Kington Value PC5300 | 784 | 5-5-5-15-2T | AC Freezer 64 Pro

[attachmentid=364620]

wait i rich 1st hehe...
black edition temp reading is also wrong from what i know =X
but someone manage to clock it to 3.4 ... i dunno that is stable clock or not =X

bro, what's ur temperature when u use 2.8GHz 1.475vcore?
can show a SS ? interested to know
thanks

Dunno about temp, but the power consumption is
When both are at 3Ghz, a Brisbane G2 takes about half the power of a Windsor (less than 80W). Use stock heatsink also can overclock quite high for G2. Only one downside, must overclock 0.1Ghz more than Windsor to match Windsor's performance.

no doubt G2 got better clockspeed than G1. but without proper temp reading, make me feels worried all the time..
can using old timer method, by touching the heatsink. but for me its kinda hassle...

power consumption for G2 sure lower. yeah, due to longer latency (correct me if i'm wrong), have to oc it 0.1ghz higher to match windsor...

the latency is more giving it to clock more higher....
same as ram latency... u may see why ddr3 latency so high with higher mhz...
it is due to 65nm technologies...
more smaller capacitor less heat...

This post has been edited by cyberloner: Dec 22 2007, 10:38 PM

phenom 9600 black overclock to 3GHz stably
(but wait, check the vcore )

This post has been edited by dblooi: Dec 22 2007, 11:05 PM


Attached thumbnail(s)

bro dblooi,is it 3.1ghz at 1.275v high?
coz if my fsb is 314(3.14ghz)1.275 vcore.already not stable

ive tried to boot 3.4 at 1.350vcore.pass sper pi 1m..only once..

This post has been edited by alive88: Dec 22 2007, 10:54 PM

HTT 314? Orthos ? no idea as i never test that b4 for ur proc
only test stability of those proc with Pi 1M

This post has been edited by dblooi: Dec 22 2007, 11:04 PM

ya lor..with orthos cant pass..1.275 is ok..honestly never try wif 1.25..1.2v also cant even boot bro..dont know why..mybe vdimm too low can affect or not?

Just read one review for intel Dual Core and Quad Core Q66.
Forgot what the model for Dual Core

For Quad Core, it take almost double power consumption as Dual Core.

I think the same goes to Phenom Not sure though. Hehe
If want to go Quad, prepare money for electric bill as well. Hahahahah

-pWs-

my statement b4 correct what..i mean the diff performance between the brisbane and windsor is caused by the latency.have to clock 0.1ghz higher for brisbane.
with smaller caps, does that means more caps can be stuffed inside the die?? means the size smaller, but the total caps used increased??

aiyoyo...it's transistor , not capacitor

for k8 am2 proc

number of transistors

90nm: 164 to 243 million (depending on cache size)
65nm: 221 million

Guys,im still in doubt about Intel Dual Core versus AMD Dual Core.

Actually,which is better?

E2160 or X2 3800F3
OR
E6320 or X3 6400.

For phonom 9500 and 9600, they are rated as 95w
C2Q power consumption is doubled maybe becoz they just simply combine two dual core together then gao thim
while phenom is native quad core processor

E2160 or X2 3800F3 = definately 3800 F3, why? personal experience, heck i even prefer the F3 over E4300, despite benchmarking results, in real world windows environment i feel that the f3 is way more responsive and my apps loads much faster.

both r ocable if 2160 is m0 , but intel calculate PI faster than AMD

again, my mistake...transistor lor...