maybe he wanna form a beautiful figure

333 HTT, 1000 HT link

bro tachlio,
your vcore why set to so high?
your proc can do 3.3G prime stable adi with that vcore

tat make me feel weird.. they seem like high vcore more vcore less money..

don know why i set 1.275vcore got got problem when load to window~

so i set to 1.3 it is ok~

later when have time i try again~ coz the ram i still no time to tweak yet all direct choose loosen 1st

change to the modded bios adi?
your mobo got problem with oc ram, need suitable bios only can oc properly
about ram tweak, you can check my posts in V3 last few pages...
i share with alive88 and few guys here b4

ya using the Modded bios by -pWs-

don know why 667@10 mutiple stuck at 260 busspeed only~

BTW the Trfc for each ram, Mal, refresh mode N trd how to choose when start OC?

This post has been edited by tachlio: Dec 22 2007, 12:05 PM

trfc set to 75ns, MAL set tp 8 or 9, refresh rate use 3,9us
2600/6= 433
your ram just oc a bit only, what's the ram timings that u use during that time?

This post has been edited by dblooi: Dec 22 2007, 12:27 PM

667 lolz~

it can do 336x9.5 n 336 x9 but cant even pass 260x10

How bout 533 divider? Can pass 260 HTT??

-pWs-

don't use 9.5 multi , low performance
i meant what's ur ram timings when you oc 260X10 that time
5-5-5-15-2T?

ya 533 can even OC till 3.5@10 mutiple no problem

---

Added on December 22, 2007, 12:59 pmya...

will ram timing affect it??

coz i set too loose?

This post has been edited by tachlio: Dec 22 2007, 12:59 PM

I would say that is divider problem.
My DFI also giving me problem in divider.

For my case, I cannot achieve more than 3000MHz [10Multi] for 533 divider

-pWs-

This post has been edited by -pWs-: Dec 22 2007, 01:48 PM

I'm not sure, but I have an experience which points to the possibility. Back when I was underclocking my F2, I pushed the vcore as far as I could go, but the processor quickly got unstable at anything but the lowest speeds. The strange thing was, at the unstable point, the ram was heavily underclocked, but the stability tests that it kept failing had everything to do with ram. Stability tests that didn't stress ram could pass for days with no problems.

Here's a quick breakdown. At stock speed, I could run at around 0.950V and at least boot to windows, but only around 1.025v would it pass CPU stability tests happily BUT it would still fail memory tests regardless of what vDimm I pumped (I didn't touch timings though, ram running at stock timings & frequency). Only at 1.125 would it be 100% stable.

add me bro

3800 f3@3091.8ghz | alive88 | TF590SLi | Crucial Ballistix PC6400 | 1030 | 5-4-4-5-11-2T | Stock






Attached thumbnail(s)

Why your core voltage is so low?Mine at least 1.475 oni can boot 2.8Ghz. = =

hmm...using 3850 now and use vista already...problem is i cannot use ati tool =x...and my graphic card feels hot...how to check the temp?

probably you have no idea about what is F3 windsor
alive88's vcore is consider too high adi for him to do 3.0GHz

check this out, what can a F3 windsor do at 1.475v





Attached thumbnail(s)

OMG....Izit brisby sux?...BTW the RAM Vdimm how many ? 583Mhz..

vdimm? Max pumped
but actually i can do it with 2.25v
my 10th can do 1200Mhz with ~2.3v

F3 is the real gem for AMD lor...G1 is another testing proc by amd i guess. the G2 is better..

my cpu cannot gain any stability over 3.4.... any other push will prime fail...
cannot boot to 3.5 but pc also shut down.... must be heatsink cannot tahan sudden peak of temp...

i think b1 and b2 is da same cpu... only b2 can clock higher only...
the cpu cache latency for both is same speed....