My last stable overclock to use 24 hours /7 days
vore 1.475... wrong reading from cpu-z

This post has been edited by cyberloner: Dec 22 2007, 02:10 AM


Attached thumbnail(s)

Normally I do not touch other voltages.
You can if and only if u wan to go extreme

-pWs-

bro, u plan to use for 7/24 ah?
CPU Temp look quite high wor...60C?? full load?

This post has been edited by ongbs: Dec 22 2007, 02:28 AM

consider low for me... hehe
yup plan use this for 24 hours... no shut down....
normal use... never reach that heat also....

oic.Meant other voltage wont affact the stability of the system?But now i set 1.4625V 267x10.5 2.3Vdimm 400Mhz 4 4 4 12.It's stable.But i tried to push up more it cant stable to pass orthos run and booting up system.I shld adding by where?

amd cpu have the limit... pushing more vcore that doesn't even help improve the stability of it means u just hit the wall....
u can drop the clock and prime until u can find the stable clock it can support...
drop vcore slowly and prime to find the best vcore for it....
i already tested a lot 4000+ and they almost dun like to climb to 3ghz stage....

5000+ black edition might be the nice upgrade to gain 3.2ghz with multiplier change to 16x
i just tested 5000+ just now and it can even go to windows with 3.0ghz without adding vcore but no futher test...
3.2ghz can boot with default vcore but blue screen at windows means it want more more vcore


This post has been edited by cyberloner: Dec 22 2007, 04:30 AM

Add me xD




AMD Athlon X2 4000+ G1 | noobianz | Biostar TF560 A2+ | Corsair Value Ram DDR667 | 560mhz effective | 5-5-5-15 | 9.5cm fan mounted on custom heatsink

This post has been edited by noobianz: Dec 22 2007, 10:04 AM

Kindly please provide me the details.

Template:

It is better to provide the details for me as you might not update the signature.
Thanks


-pWs-

This post has been edited by -pWs-: Dec 22 2007, 09:30 AM

Boss, you didn't correct my stats in the list

3800+ X2 Windsor F3 | lohwenli | Abit NF-M2 nview | Crucial 10th Anniversary | Thermalright XP-120

I've never used the NF-M2S in any of my own PCs and probably never will.

This post has been edited by lohwenli: Dec 22 2007, 09:47 AM

Ok bro...I thought i told you will change for you next update

-pWs-

Opppppsss my bad... Slow internet connection... slow to update list.. haihhh.. sorry


This post has been edited by cloudwan: Dec 22 2007, 10:12 AM

Thanks for the reminder.
Maybe tired already ..never notice that.
Will get it down as soon as possible

For who want to edit to database, last kind reminder
I will ignore who do not fulfil the requirement.
Dun wan keep myself repeating here.

Thanks

-pWs-

I didn't receive your reply, guess it got lost or something. But thanks anyway.


Never mind..we'll remind them for you.
Right guys?

Thanks

Does Vcore gain stability for ram also?? Any idea?

-pWs-

but if can get like f3 version now.. i mybe think to change to it.. dont like higher vcore..

i think it's more like to stable ur oc when u push ur HTT..correct if worng

oic.Hmm what the best voltage shld i apply to hit 3.0Ghz?But i tried 1.4625V it cant boot up 2.8Ghz but at 1.475V it can boot up lolz

I wanna try but i have no information about it.Nvr dare to try now.I am newb lolz

there is no definition of best voltage.. just make sure u didnt exceed 60c n it consider safe.. (when orthos only)

if u dont know wut r u doing, just leave it at default..

Bro pls update mine ~ for stable use

Windsor 3800x2 F3 | Tachlio | DFI Ultra M2 | Micron OEM DDR2 800 | 1000 @ 667 Divder | 5-5-4-12-2T | TT BTVX



This post has been edited by tachlio: Dec 22 2007, 11:32 AM

vcore?? tinggi nyer.. why use 9??

Wonder why i using 667 devider @ 10multiper, it cant boot even at 260 bus speed

but when i lower the multiple to 9.5 it can boot even at 336 bus speed@ 3.2Ghz but the super pi is damm slow only 36s@1m

after that i try lower again to 9 multiple @ 336 bus speed @ 3.0Ghz, the SP result is better than 9.5 multiple @ 30s@1m

BTW the MAL ,Trd n other timing how to set is better?