hi there.. i'm newbie in oc. hope all sifu can teach me how to oc my proc step by step.

Currently using amd 3500@2.2ghz,
AC freezer 64 pro,
1gb x 2 kingston ddr2 667mhz,
asus m2n32 sli deluxe,
enermax liberty 500watt psu,

quote=ocz,Dec 20 2007, 05:08 AM]
Disable the cool and quiet in the bios
Get to know the voltage and vdimm,
load up some cpu-z screen shot.we'll begin to help.

[/quote]

ok sifu, this mine.. pls help

[attachmentid=363579]

[quote=-pWs-,Dec 20 2007, 08:53 PM]
Do you mind list out your hardware as well?? Thanks

-pWs-


here my rig...
AMD 3500+@2200mhz
AC freezer 64 pro
Asus m2n32 sli deluxe
1gb X 2 kingston value DDR2 667mhz
bfg 8800gts oc2 320mb
enermax liberty 500watt

[quote=-pWs-,Dec 20 2007, 09:38 PM]
As what I can see, I assume that your processor stock Vcore is 1.375 +-.

Here some steps for you to the journey of overclocking.
1. Manual set Vcore and Vdimm. Vcore = 1.4v & Vdimm = 1.8v
2. Set HT Link Multiplier to x4
3. Set Ram Divider to 533MHz & Ram Timing to 5-5-5-15-21-2T
4. Add HTT by 5 or 10MHz. Then Orthos to test stability for around 30 mins for each setting.
5. If error detected, add Vcore and Orthos again.

P/S:
1. HT Link and HTT are different things.
2. For Orthos program, google it then you will find it
3. Please use CoreTemp to monitor the temp. Better keep under 60C

If anything weird happen, please do post here

-pWs-


thanks for ur guide.. mybe try to oc tonight...just download the orthos program, but how to use it, what i mean is there is alot of stress options there. which one to use 1st anyway, thanks again:respect:

This post has been edited by Milo_77: Dec 20 2007, 10:13 PM

[quote=-pWs-,Dec 20 2007, 10:00 PM]

Do not delete the [/QUOTE]

If everything is correct, should appear as below.
-pWs-

[/quote]
refer to the orthos program, which one should be stress 1st??

This post has been edited by Milo_77: Dec 20 2007, 10:19 PM

just finished oc my rig. bro pws, got question here. how to increase my dram frequency . the orthos stress error in 43 minute. should increase the vcore somemore??

[attachmentid=363761]
[attachmentid=363762]

what is the maximum value of the vcore?? so in my case the ram freq has been increased. i just increased the HTT to 250 and cpu freq to 250 and multiply by 11. is this ok?? another question, why should use the 533mhz ram divider instead of 667mhz?? anyway thanks again

This post has been edited by Milo_77: Dec 21 2007, 11:45 AM

if wanna use the 667 ram divider, what is the timing for ram. just same as 533 ram divider?? you say that to get 786mhz must add Vdimm. how much to increase?

bro pws, got question here. how long to run the orthos program. currently still running the program, 2 hours and 7 minutes with no errors..

This post has been edited by Milo_77: Dec 21 2007, 04:02 PM

bro, add me to ur list...

3500+@ 2750Mhz | Milo_77 | M2N32 SLI Deluxe | Kington Value PC5300 | 784 | 5-5-5-15-2T | AC Freezer 64 Pro

[attachmentid=364620]