Bro fuilo. Start Oc-ing using multiplier 10 and ram divider 400(cpu/10= 1:1). See how far can your cpu go first. You're using value rams i supposed. Don bother OC it yet. Focus on your cpu first. And one more thing, does your proc really need to pump vcore at 2.8Ghz? Most 4000+ brisbanes dont have to add vcore to reach 2.8.

ram doesn't overclock as well as intel becoz of the latency thingy, intel have looser latency than amd that's y ram tend to go higher in intel platform. my d9dcl can go up to ddr2 1000 w/o sweat but in amd it can only clocked up to ddr2 980 ish.

btw, with amd, i njoy more tweakin with d ram on amd platform instead of just pumpin d clock with intel.

Ya, try that, actually putting 236 fsb. running good through the benchmark with the default Vcore. I am selling due to my BIOS issue. Otherwise, I am keeping it. On the bug, I can disable the TLB and enable it. That's how to compare with B3 stepping. Those waiting for B3 might want to consider as it need to wait till May. The bug very unlikely to cause system hang, as most of us do not run 100% cpu process all the time. Only virtualization on servers.

wow 2.5GHz with normal vcore only...what mobo r u using...i've tried mine can go 2.5GHz to but need to pump vcore
till 1.5v just to get a stable system but temp can go high like 60-62 when loaded with stress

where is the 770 user result?
or u guys just too lazy to change the board..huhu
faster2!ive been saving my money for this

what sware can be used to test system stability on dual core X2 system. i used sp2004 previously on my winchester.. is it still relevant if i use sp2004 for dual core cpu?

u may use orthos or prime 95..it is specialized for dual core system..
or even super pi..n do 32m benchmark..

im also looking for xigmatek cooler,but hard to find lor..pm ckchong till now tak reply lor.do someone else selling this cooler

perhaps u will consider the tuniq tower 120?

s963 no stock until cny, an he has lotta stock for s1283.
he'll reply but bit later.

changing to phenom tomorrow.

wahhh .....i tot you already sell all ur stuffs?
change to phenom pulak

dia cakap rugi teruk baik sendiri keep

Hehe bro db, now dun want u write anything else except the review/test results of yr new toy...770+

This post has been edited by ongbs: Jan 16 2008, 12:08 PM

yup..mine dnt hv to add vcore to reach 2.8Ghz using multiplier 10 and ram divider 400 as nadeng stated above....

I am trying another program ===> OCCT
not bad too
Worth giving it a try....

which value ram are u talking about?

using biostar tforce 550 now. seems i cant set divider in the bios. auto @ cpu/8. how to check this mobo revision?

corsairs/kingstons bro.

didnt sell, sayang my pc lor.

hahaha, exchange with our fellow mate here.

still waiting for my RAID card & 4 pin to 8 pin converter

bro AoiNatsume ,

mind to PM me the tracking no.?
wanna call post office now

if u want to change divider, try set refresh cycle to higher latency

This post has been edited by soulfly: Jan 16 2008, 12:41 PM