@kabukiawie
oredi set to 3-4-4-8 at 255MHz but stuck .... that's i'm tighten the timing at 254MHz .... btw have google and found that the highest vcore for prescott is 1.525V ... gonna pump sum juice more ...

About the same la,just the multiplier is not the same. Between,you shouldn't sell off your mobo and proc last time.If not you are still able to contribute here with demo.

Don't blame me man, blame the Dark Side of Conroe.

guys, these guys are even more crazy.

http://www.ocforums.com/showthread.php?t=327388

all with insane stuffs to play oc.

@sang_karim
the vdimm how?? rise a bit should be fine. i believe your ocz ram manage to stand at 2.85v easily.

Wah.. 20mins dint refresh.. Once refresh the post is flooded.

@Sang
Try loosen ur timing again. 2.5-3-3-7 might be too tight for ur ram to take it. Try make it as 3-3-3-8 and try again. It might havent crash the wall. Just ram timing might be the concern. Haha.. Dont need join 4G club, but join FSB250 above club. Loosen ur ram timing, pump vidimm to 2.75 and try again.

Anyways sang, from ur screenie i notice that ur running some other program at background such like ur AVG and yahoo messenger. Try off all the program and run PI score again. I bet it will decrease the time.

@Ray
Yea.. Sang result wil be better then mine alot if he could reach 4G. As he will need FSB 260 above to get 4G i bet the result might will hit 32s for 1M pi score.

@sHawTY
Aloha boss! Haha.. Yea! I was using 3.2E to hit 4G.. So still not that good.. Maybe u can put ya hope on sang_karim, he was on the way to 4G.. Might be can break my record. Yea.. We only use P4P800SE to OC nia.. Ur using high end board to make that while we only use the normal board.. So sad i burnt my P4P800 Deluxe!

This post has been edited by fylon: Nov 16 2007, 11:55 PM

haha ... no 4Ghz for me ... here the situation :

vcore = 1.5v
vdimm = 2.75v
vagp = 1.6v
ram timing = 3-4-4-8

windows hang at FSB = 256MHz .. i geuss it's not the vdimm ... vcore almost max = 1.525V .... one conclusion, oredi hit the wall ...

Woh? I was now typing this reply with 4G and also use the same setting as urs! Was try to do some 3dmark benchmark later on. By then, had u try with vdimm 2.85v see can boot or not..

I just found that my proc need 1.5v vcore to stable in certain task such like file compressing.

i don think it's about the ram ... 2.85V gonna void the ram warranty if sumthing bad happen .. so i wouldn't dare to risk that .. 1.5V need to stable ur proc .... u really need that high CFM fan la dude ...

Haha.. Yea! 1.5v needed to some do application. But just for testing purpose. I wont stick to 4G all the time as well. Normal usage, 3.6G is more the enough.

By then, the ur game isnt finish yet.. Tried with 5:4 timing yet? Maybe 1:1 ratio will hang u at 255fsb but 5:4 might able to push ur proc higher without depend so much on the ram.

if using 5:4 divider of coz can reach 4GHz but not so syiok maa ....

this thread really is flooding~~
4 pages for 1 day.

sang also hand itchy liao?

5:4 @ 275 @ 1.55v @ 2.8v @4400mHZ ( assume 3.0E)

that would be a new score here. anyone wanna try??

5:4 @ 250 @ 1.45V @ 2.75V @ 3500Mhz ( my 2.8E )
what i can do so far , so good

tea.....478 socket still ass kicking if going to OC a little bit,if OC higher almost like C2D

Wah so fast page 4 already,the spirit is burning hot now. I guess if each of us here change to dark side the thread also will be that hot to..Between albert,3.0E to 4400MHz is on air cooling or water cooling?

@sang_karim
i would like to see you get pass 4GHz with 5:4. like last time you tried 5:4 also quite impressive. i believe at 4.2 it will out perform your current speed. dont forget ca you run at very tight timing as the ram is not running at high speed.

have you read through the link i post before?? they are using 5:4 to get 4.4GHz!! the superPI is 30s!!!!

read this...post #78
http://www.ocforums.com/showthread.php?t=327388&page=3

This post has been edited by kabukiawie: Nov 17 2007, 09:25 AM

Haha... The 1st day of new thread had reached 4page. Spirit is burning high now.

@Sang

Yea.. If u wanna break 4Gh, maybe u can change ur ram ratio to slightly lower abit. As kabu say, when u change the ratio, the system wont be not so depend on the ram, thus u can tighten ur ram timing. Might can hit 32s for 1M PI eh!

@Albert

Is that ur result before? 4.4Gh on Prescott?

@Kabu

The 4.5Gh is kinda scary.. SL7E5 3.2E??? Thats my proc.. No wander can get high speed as long as got enough vcore.. Guess im owning a gem on hand! By then, their ambient temp kinda impressive. Maybe i think they did the OC on winter seasson. 30++'c...

@fylon
can teach me how to OC ma??i gonna try OC abit about 2.8ghz>3.0ghz

ok .. i'll gonna try with 5:4 divider .. not rite now coz downloading sumthing ... hehe .. maybe on sunday nite ...

bro add one thing on my profile......tuniq tower120

@herojack41
Mobo, proc & ram details? I thought i had write a guide in V4 about how to OC? Im too lazy to write again. Got time view back the old thread.

@Sang
Yea.. I think if u run on 5:4 divider u maybe can hit high speed. I wanna try mine as well. Maybe 4.2Gh..