latest CPU-Z is v1.42

uik ya? but http://www.cpuid.com/cpuz.php latest version only 1.41

anyway i've downloaded the 1.42 and it stated /8 too. so does that mean previous readings for those who are using 3600+ with 533 ram div is wrong? at least mine are wrong

hey guy , wat bios ver u use and most stable( Abit KN9-Ultra 570)

always refer to latest cpuz ~

I like 18bios than the latest(20 or 21)
give me more oc result than others..stability too have a diff result..

i m using amd athlon x2 am2 3800+ windsor f2, asus m2n-e, 1gb corsair ddr2 667 vs ram, palit 7900gs 236mb ddr3..can anyone teach me to overclock mine please?

basic idea of OCing AM2 before increasing the bus speed

- disable Cool n Quiet feature
- lower HTL multiplier to X4 or X3 if necessary
- lower RAM divider to 533
- increase bus speed little by little

i hope i give the right idea to do so

oh..ok..i m using tt bt vx btw...

my ocing result.
i know my ocing result not as good as u all with F3 which manage to hit 3.0ghz and above...
(superPI result, mistakenly klik "ok" button after done )

you should try 1st before tweaking other stuff. for X2 3800+ F2 version, getting 2.3~2.4GHz is a proud already

lol..really?hahha

what u all can say about this?plz help me...juz a noob and new in oc...thx

wut is ur expecting answer? dun understand at all what u want

i want to oc..so what can i do?ram ok for oc?juz a vs ram btw...f2 stepping can go further or f3?

before this i use VS oso, corsair too... from the information u can see it use 667 divider..
f2 n f3 hv different oc ability..

If i use ram divider to 667,will it effect the performance even tho my proc is clocked to 2.5Ghz...?

try to find sweet poin, that allow u to use se maximum mungkin

Depends on processor, if there is no divider that will give exactly 800 while on stock CPU speed then it will run slightly below 800 unless you overclock the processor.

F3 can go waaaay higher..even better than Brisbane G1..
Ram go get anything using D9GMH, D9GKX chips. D9GCT also ok if you're on a budget.

@seanlimys
u got same mobo with me there...that mobo got limited Vdimm. but still ur proc can be oced....

me using D9DPN, overclockability still ok...
after oced, try to tighten my rams timing:

Latency at 5-5-5-15:


Latency at 4-4-4-12:


The diff just transparable during benchmark. in daily usage, can't be differentiate actually between these two setting...

@ ~pws~ plz update my speed and cooler (Thermalright XP90) at 1st page plz...thx..

This post has been edited by rainingzero: Nov 18 2007, 05:00 PM

Then,after i find the sweet point,do i need to use div 800 back or just stay with 667 or 533 or even 400 div..?