hmm...adding ram and gcard will increase cpu temp or no??
coz i using sis's 8600gt n fix 3.5gb ram now...but the temp is killing...even on stock speed

..but the temp is killing...even on stock speed===> which temp you mean? Case internal Temp?

RAM didn't increase temp much if compare to GC!

Buy those GC cooler that will exhaust hot air out from your casing like Artic NV Silencer.
Zalman type cooler have good cooling effect but the hot air will just dissipated inside the casing and increase overall temp

This post has been edited by ongbs: Nov 17 2007, 10:32 PM


Attached thumbnail(s)

KN9 serious is nice and good board to OC... update to latest bios....
Don't forget Drop LDT hypertransport multiplier too
i've been KN9 SLI user a while... it does OC high

This post has been edited by cyberloner: Nov 17 2007, 10:33 PM

@cyberloner LDT hypertransport multiplier mean ? the HT link ?

wootttttt hahahaha ...more speed less ram and 3dmark scores

3.5gb ram...2.7+ghz 8600gt 700/800



credits to pmmonkey for her hardwares =.= 8600gt n 2.5gb rams

This post has been edited by dj.eRicZzz: Nov 17 2007, 11:42 PM

i'm not using any casing for my comp...all naked on my table...
what i mean is... normally my processor is 25 degrees...but after adding graphic card, the temperature increase to around 30 at idle

--> dj.eRicZzz
What your conclusion on Post#965??

-pWs

what u mean?

---

Added on November 18, 2007, 12:22 amwhat u mean?


This post has been edited by dj.eRicZzz: Nov 18 2007, 12:22 AM

Ermmm... Is there any improvement by using more ram also something else??

-pWs-

bro can DFI ultra M2 using the DDR2 800 it will auto downclock the DDR2 667???

Mind to further explain your question??

-pWs-

coz planning to get pair of DDR2 800 ~ so it will run at DDR2 667 speed??

only i OC to 800, it wil only run at that speed right~ coz our mobo don support DDR2 800~

No.... If you buy DDR800 ram, it will run @ 800

-pWs-

yes... u should proud having ABIT =P

Mv Vcore is 1.487V when i try to run 2.6Ghz with AF 64.When running Orthos,it only load like 39-41C.But,fail Orthos.

Is it safe if i add another 0.200v so that it run 1.5v..?

anyone care to explain? we all previously uses 533 ram div as /7, but now it is /8 already

i keep it lower 1000mhz , but still failed ..

why u open two cpuz but different div??

r u using both different ram?

vdimm max.. coz its jus benchmarking...
vcore as a cpuz.. my psu cant tahan to support if my proc higher than 3.5ghz

Nope, not different RAM but rather different version of cpuz. One is 1.40 and the other is 1.41

1.40 stated /7 just like previous OCer who already submitted their benchies. 1.41 is the latest ones, stated /8 which making me confuse on which divider should I rely on while using 533 RAM divider