db bro edi hate brisbane..haha

graduated from G2 to F3, it maxed out @ 3.2Ghz. Even when both is on 3.2Ghz, G2 loses out about 4 secs on SPI-1M.

ya maybe Brisby lose in cache latency

but for me, i prefer cooler and energy saver's brisby.

As it enuf for my daily use ady.

i will try it if someone willing to sponser me one

sad to hear that... 3.2G is just very begining of F3 CCB8F
btw, can provide the link? wanna have a look
thanks

i see F3 can reach up to 3.5~3.7GHz, in air cooling or water? is it safe for daily usage? i mean like 24/7. and HTL, no more keeping under 1GHz is it?

HTL more than 1000 lor...
bt not too much lor...
sum chipset can't clock high...

just got new proc today ...update mine bro...

6000+ X2 winsor F3 | nidzamputra | Abit KN9SLi | Team Elite DDR2-667 | TT Big Typ 120VX| 3405MHz

This post has been edited by nidzamputra: Nov 5 2007, 03:31 PM


Attached thumbnail(s)

sket sgt la improvement.. btw..nice
ram tak leh push lagi??

entala bro...nanti kena try lagi la...max vcore utk proc ni baper ek?td ram dah naik kan sampai 2.10v..max dapat boot td 3.45ghz..tp super pi failed! ...apa cadangan lagi utk up lg proc ni?

try use.. ddr 400 first.. kasi timing loose sket.. then push ur proc first.. ram tolak tepi dulu..
wut cooling for the proc?
load temp plz..

hehehe..macam ner nak loose sket ram tu? hehehe..br blajo OCing ni...

cooling TT Big Typ 120VX

temp 33'c idle..full load 41~43'c

try to find memory tweak, n set to 5-5-5-15-20 2t ker.. sumting like tat..
ur ram got cooling?
u can push ur proc, but keep it below 60c la..(coz i prefer tat temp)
dunno bout other

The real AM2+ is coming hehe
http://www.biostar.com.tw/app/en-us/t-seri...t.php?S_ID=310#

This post has been edited by davidletterboyz: Nov 5 2007, 05:58 PM

wow.. another TA.. Good2

Wow...HT 5.2G

@davidletterboyz
Know the price range already??

-pWs-

Dxxn, I was hoping my DFI UltraII-M2 will OC better than my Abit AN9 32X...

Just switch 3800 F3 to DFI and Brisbane 3600+ to Abit...

Turned up Abit OC better than DFI

F3 cant even POST in my DFI@3.4GHz....

Gonna check what happened!

Previously Brisbane in DFI need a lot of Tweaking to get >3GHz,
now in Abit within 5 minutes it already boot into XP @3070GHz....
now is testing PI 32M....

Walau eh...what happened to my DFI?

bro PWS and CV6149...HELP!

This post has been edited by ongbs: Nov 5 2007, 06:42 PM

DFI seems need higher vcore to achieve the same speed as other boards do.
This is what i found out.

-pWs-

You are right, previously my brisby need 1.60V in DFI to do 3GHz.
Now in Abit it almost finished 32M PI test at 3.07GHz@1.55 Vcore

-----------------------------------------------------------------------------

aiyo...it just passed PI 32M test....
Try to adjust Vcore to 1.525V and see what will happen...

This post has been edited by ongbs: Nov 5 2007, 06:43 PM

Just got the Biostar TA690G.
Really a nice board w many overclocking functions.

If compared w DFI Inf UltraII-m2, I would choose TA690G. Somehow like TA690G give me more smooth feel.

-pWs-