i want see 4ghz 32M

---

Added on November 3, 2007, 11:59 ami know the solution, look at ur rig.. sell one of them n buy new cooling..wakaka

This post has been edited by xixo_12: Nov 3 2007, 11:59 AM

aiks... faced some problems , super PI 32M not running..
ice wasted
need troubleshoot 1st
btw, i guess i know the reason why ong's super pi 32M running slow adi.....
i faced more or less the same thing.... wondering why

at wut speed bro?
furthermore kinda pelik with bro ong setting.. 29m with that value.. waa.. why so late??

still waiting for ur stable and good result

This post has been edited by xixo_12: Nov 3 2007, 08:04 PM

Super PI 32M @ 4 Ghz
It would be around 17 minutes IMO
http://www.overclock.net/benchmarking-soft...-top-times.html

at 3.7G , super PI automatically turned off ...
drop till 3.6G, same thing happen ...
tot unstable so drop again till 3.0G ...same
check task manager , CPU usage drop to 0% half way ,
wondering why, maybe something wrong with my tweaks haha

haha 19M? i would say it is piece of cake
no bluffing
found new target ....later go buy ice bench 32M again huhu
thanks ronaldjoe for sharing the nice link

edited: wait i solve my weird problem 1st

This post has been edited by dblooi: Nov 3 2007, 08:22 PM

not enuff power I think...
I too faced this sort of issue where speed seems to slow down..
bump up the vcore....speed come back again with a vengeance,,hehehe

poslaju damn you!!!!
If not i get my stuff and can start to play this weekend already!!

This post has been edited by CV6149: Nov 3 2007, 09:06 PM

haha ic... bro u meant 10th rite?
just check the link that bro ronaljoe share to us...
pi 1M highest record is 21.5s....
maybe is time to bench a new result

Sorry for noob questions..

1-How to change the ram devider,ive the ram divider table from rebels haven,but im still a bit blur about it.
If it is in the bios,then how to find it,i wanna run 533 devider.

2-What is the stable voltage and vdimm for windsy F2 to at 2.4 and can run orthos for 6+ hours?

For all those who recommend me to buy a new cooler,thanx a lot guys.
Ill do it later,rite now my pocket all ready empty.

find 'memclock frequency' under overclocking navigator engine

Thanx bro for the help, about the command rate,do i need to change it to 1T instead of using 2T..?
I heard that A64 suffers big time with 2T.

i set it to 2T....dont know about others

Thanx,i set the divider to 533 but fail to load windows.
Then i use 667 divider,then can load to windows.

Here is the SS. Hope can pass Orthos!!

i think you need to set the timing manually after you set it to 533

bro , lower ur ram div 1st , set to 400 , find ur max cpu 1st , then start oc ur ram
happy OC

Ok,if i set the ram div to 400,just follow the default timings OR i need to adjust?

@ bro nikons, what timings is suitable? im not really sure about it..

---

Added on November 3, 2007, 11:20 pmIve change the ram Div to 400 and the timings is default to 5-5-5-15-15-1T running 250Mhz.

Is the timings correct OR do i need to change?

This post has been edited by ocz: Nov 3 2007, 11:20 PM

haha bro,
busy buying ice again ah???

satu kali beli 50kg lah...then all night long you can OC kaw-kaw

Really hope you may help me to solve my weird PI 32M problem
3.5G with 29m result really malu leh....

But during PI 32M everything seem normal in my system woh.....temp/power and CPU Load all increased!

i'm using kvr667.. i set maxmemclock to 800..> save n reboot...
the POST screen shows the memory is DDR667.. n also the CPU-z..i tried all official n beta BIOS.. also same.. does'nt solve this probs..
also tried another ram but also can't...

maybe this is the weakness of this board.. hope further release bios can solve this probs..
tf560 chipset temp is around 49c-51c(is it a good temp?)

comparison tf560 n ta690g
~tf560~ ~ta690g~

Love: Hate:
- nice layout n arrangement - big vga cooler block the cmos jumper
- fast loading window - not fast loading windows
- full atx mobo - micro atx mobo
- big cpu cooler not block ram slot - big cpu cooler block ram slot
- - smart fan controller doesn’t work not like the tf550

Hate: Love:
- cant set ddr800 when using ddr667 ram - very detail memory timing tuning n pciex tuning
- got noise on its onboard sound - nice n clear onboard sound quality
- fan cannot be control by smart(only PWM) - bla bla bla..

PS: very regret change from ta690G to tf560 .. dem dem!

this my dual orthos test..pass 6 hours test without error...



please give ur comment!!!

This post has been edited by tapirus: Nov 4 2007, 01:43 AM

Nice try bro..
Its me here still stuck at 2.5Ghz,waiting for new cooler 1st then can play OC again.

Its working 24/7 rite??