You are getting the P4P800-E ?Why in KLIA ?Your GC has a nice score,6800GT. It was once my dream card man.

my fren study in USA.. he help me bought the mobo.. because this GC la.. i ask my fren buy me that MOBO i think i can go better with that mobo .. my CPU also can go higher OC.

here hard to find the mobo... last month i just sell 1 6800 GT same spec like i'm using... so fast my fren buy $400 hahahaha.. i put in LYN but some ppl say expensive..( yes it is exp)..

post to malaysia also exp now.. 45 USD... hermm..

WAh,postage is 45USD man... How much you bought the board? Cheap price ?Your 6800GT so fast solf off already.Between,i bet your proc sure can hit at least 3.5GHz with your new mobo.

Are you sure you'll be satisfied when you hit 3.8GHz? Let's see who gets there first, when my new RAM cooler and NB fans arrive in a few days time

So far now for my board, I dropped my RAM voltage from 3v to 2.8v, and tests that used to crash aren't crashing, gonna perform extra tests with Memtest86+ and extended Blend tests of SP2004 later on After that it's time to lap the NB heatsinks, and replace the lousy Sunon fan

Is the NB temperature measured under System temperature?

This post has been edited by colinwong89: Aug 28 2007, 10:03 PM

wao...you really hardcore. 45USD for the postage alone.

the gc+mobo+postage, i assume that the gc 300, mobo 200, postage 150, total rm650 already

lap the nb sink help the cooling alot? cool...... replace the paste as well.

yup, is the system temp.

Hehe.. Depend on the ram & procs as well. If can push higher sure will wanna go beyond 4Ghz! Getting new parts? Thats great bro. Im searching for better ram as well. Haha.. Found Supertalent brand ram in garage. 250 for 1G kit include postage. Is that worth? The ram claim can run at 2-2-2-5 speed wo.. Supertalent or Teem extreme?

Btw, just tried with 3.61G and guess wad.. 10secs prime then restart me! Seems my current ram really hit the wall..

Err, i use chapalang stuff ony. [Except for the motherboard ]

The hardware that i used to reach 4GHz:
Intel Pentium 4 3.0E
CoolerMaster Hyper 6+ [CPU Cooler]
Kingston Valueram DDR PC-3200 400MHz 512MB X 2 [Double Sided, Chapalang Chipset]
ICute 450W Twin Fan PSU
ATI 9550 256MB

Where got expensive stuff?
Normal only.

These are the motherboards that i've used before that can push my 3.0E to 4GHz without any hickups:
ASUS P4P800 Deluxe
ASUS P4P800-E-Deluxe
ASUS P4C800 Deluxe
ASUS P4C800-E-Deluxe

What's important to me is the mobo itself.

This post has been edited by sHawTY: Aug 28 2007, 11:53 PM

The GC Radeon x1600 Pro 512 is for sell item (RM380) - (help fren sell and give money to his sister)

The mobo ASUS P4P800 Deluxe
+ 1.75 gig RAM + PNY 256 Nvidia + 2x 512 DDR 533 + POST = RM 900++ (USD264.28) shhh!! dont tell my wife aahhh...

LAST THING TO DO FOR THE UPGRADE!!! NO MORE AFTER THIS. too crazy for s478 i think..hermm ( ppl walking for new tech.. i walk backward...hermmm)


yaaaaaaa.. agreed the mobo is the most important thing!!!


Why dont you try use only 2 x ram ?? use the blue slots first...

This post has been edited by GCI99: Aug 29 2007, 12:10 AM

register me please.

2.8A @ stock | Asus P4P800 | Kingston 512mb*2 Apacer 256mb*2 | XFX 7600GS

I've already replaced the paste with AS5, but haven't done any lapping yet to the heatsink. I'll post a bit of results if there is any

Yeah I saw that earlier when I was browsing thru Garage Sales. Seems good actually, but if you are planning to get a DDR Booster you might as well get some BH-5 chips to play along with it

Usually 2-2-2-5 RAMs come in Samsung TCCD chips or BH-5 chips. BH-5 chips can be picky, so do test them out before you buy

haha....what i dont have is only the mobo, which is the most important part in oc.

RM900 for the stuffs. not include the gc somemore.

really have to keep this secret from you wife, if not sure you will be chopped into pieces.

its a bit crazy if you ask me, haha..... that money can get a brand new rig already.

Oh,Super Talent 2*512MB only RM250 ? The price is cheaper than the other high performance RAM yet can run at 2-2-2-5 TeamExtreme one i'm not sure. LAst 2 weeks i saw one person was letting go his Hyper-X,the RAM was also having timing at 2-x-x-x....He was letting go at RM250 per pair(2*512MB) but i didn't get it because lacked of $$$ now.

Hi brother,already registered.Welcome to da club.

Yea.. Was thinking of take off either 1 pair of the ram and see how was it perform. Should be of the ram chip having problem to reach 241fsb.

Yea.. Found on garage sales! haha.. Hm.. There was 3 performance ram on sales on the moment. Haha.. PQI, TeamExtreme TeemX, and SuperTalent. Was wander which 1 are better then grab it. All the price are in between 250-200 lidat. Hyper X? Heard that it wasnt preform wise wo.. Is that true?

By then was waiting seller reply about the ram. Hehe..

Ar... Still got such problem? BH-5 picky? What do u mean bro? Hm.. Then die lo duno what type of ram to choose.. DDR booster just an option for me. Hehe.. Might wanna get it if the price is cheap.

Someone with that mobo must prove to our thread that what's bro shawty says is right ... so, who gonna take that challenge?

wao wao wao......all talking about high end ram. cool......

they all must be preparing for pushing to 4ghz. all having nie pro and pu already. now they hunting high performane ram. hohoho.......

i dont dare take challenge, no good board.

This post has been edited by kabukiawie: Aug 29 2007, 12:00 PM

BH5 i think is not so famous in Intel system like our P4. AMD side more prefer to BH5.The Hyper-X i saw was 2 weeks ago and now ahve already sold off.I got Pm the seller too. PQI RAM i got no idea as not much people are using.TeamExtreme and Super Talent both are famous among overclockers. Can either grab one of them.About the DDR booster,last time i saw one forummer selling on very cheap price only.This one in garage sales is a bit expensive i think.

Take out challange,can.....with the condition you must be having a Prescott Processor. northwood is very hard to reach that speed.

No good mobo yet good RAM to push higher,very hard one. 3.5GHz enough already la...

I encountered tons of problems whenever I tried using my Mushkin 2x256MB RAMs with BH-5, even in using a single RAM stick.

It could be the motherboard that's giving the compatibility problems, but I used those RAMs in Nforce2 boards, namely the DFI Lanparty B and A7N8X Deluxe, which all had the same problem.

Just giving you a warning.

Ic.. Usually whats the problem will be? The system cannot boot up? Hm.. Sounds scare to me!

I know some mobos are picky on RAM. Have to becareful when choosing on RAM. T: I will be out station for a few days and only be back on next coming Tuesday.

This post has been edited by raymond5105: Aug 29 2007, 02:19 PM

hmm.....learn alot for those rams, BH5 is good for tight timings. for p4 normally it needs high speed instead of tight timing.

no la.....just 3.3GHz nia....where got 3.5GHz??