different apps reported different temps. so which temp reporting application would you believe in?

My at 3.5GHZ idle

On SpeedFan 4.32 add +15C

This post has been edited by stasio: Jan 4 2008, 12:37 AM

I guess this is a common problem but most people tend to trust Core Temp.

New SpeedFan 4.33(and 4.34beta37)show correct now

i have used speed fan 4.33 and its still not the same shows lower by 7c compared to core temp.

a few question of mine

1. why when i try to oc to 3.2 using any multiplier 8/9 and use occt to stress out occt keep giving me errors (come out graph result saying error detected)after a few minutes? or the pc would just restart itself? (keep in mind im using custom set vcore)

2. tried using stock vcore and still the problem persist. Using prime95 also gave the same result.

3. Things that i change on my mobo asus maximus formula was only the multiplier 8/9, fsb 333/366/400 and vcore to anywhere btw 1.275-1.54
i did not change any other function on the mobo besided those three options

plz in need of dire help

My setting for 3.2 stable is 1.33125V in bios,all another are normal.What is your memory?

HEY !!! your temp is FARKING high in idle !!!!!!!!!!!!!!!!!!

possibilities:
1. Your Vcore too high - try lower your vcore bit by bit
2. Not enough AirFlow in Casing
3. You are not using Good HeatSink
4. Your HeatSink didn't seat properly or contact problem

Im having the same high temp as u bro..dunno y, but speedfan shows a lower temp than Coretemp. So far running the the rig with the OC setting 24/7 and playing Crysis/NFSPS/The Witcher/FIFA08 wif no prob. Which one should I trust?

wah it seems some chip really created unequal.......1.4v for 3.6ghz is really good, feel like swapping mine to try my luck..

gengstapo, most proberly ur heat sink is not seat properly, seems to be too high ur temp. Any 60oC should be still save i guess, as the processor recommended operating temp around 71oC. just piece of advise, if ur heat sink have plastic clip or pin better get rid of it before it get melted like my HR-01, change to bolt thru kit improves the temp too.

well from a bit of note for my setup, i still enable the c1e and thermal management in bios at 3.2ghz (1.32v) and the prvious 3.3 ghz (1.42v) the voltage is indicative( cant remember, forgot to save screenshot or jolt down); but to go above i need to disable all those. Well there are a few degree drop in the temperature when those are enable.

SpeedFan temperature add +15C
My is same when using version 4.33


This post has been edited by stasio: Jan 4 2008, 09:01 PM

How much can we overclocked Core 2 Quad Q6600 2.4GHz with it's standard cooler?

Pc Spec:

Processor : Intel Core 2 Quad Q6600 2.4GHz
Motherboard : Gigabyte X38-DS5
Memory : Corsair XMS 2 6400 DDR2 (2GB)
Graphic Card : Gigabyte 8800GTS 320MB DDR3 320BIT
Harddisk : Maxtor 320GB SATA 2
Rom-Drive : Asus 20X DVDRW +/- SATA
Casing : Cooler Master CM690
Power Supply : Cooler Master Extreme Power 600W

Speedfan 4.34b37 correct temperature


This post has been edited by stasio: Jan 4 2008, 09:02 PM

hey ! why not running your RAM at 1000Mhz ?
im running 1000Mhz at 4-4-4-12

i dont like 1:1 ratio

javascript:emoticon(':o')

---

Added on January 4, 2008, 11:04 amby the way, why using WINDOW XP ???

window xp professional = only support 2 cores
window xp home = only support 1 core !!!

i'll stick to VISTA

This post has been edited by cscheat: Jan 4 2008, 11:04 AM

Just downloaded the 4.34beta 37 but its not detecting my cpu temp or is it? Here's the screenie.

Duh!

cscheat,
my memory is Kingston HyperX KHX6400D2LLK2/2GN,then I prefer to be arround 800.XP using mostly for testing.Also running Vista Ultimate 32&64 bit on same PC.Testing on Vista give me problems.
peacezxp,
For SpeedFan 4.34beta 37 on Vista "Run as administrator"or set in properties

im using mushkin 4gb of rams without doing any changes for it in bios...

+/-3ghz thereabout for G0 stepping.

Yeah,arround 3GHz as per

---

Added on January 4, 2008, 10:57 pmNeed more detail about your memory

This post has been edited by stasio: Jan 4 2008, 11:01 PM

GUYS !!!

i did a Cooling Mod and my temp drop another 4C !!!!
see this at idling !!!!!!!!!