Me also,adjusting(lowering) some of voltages in bios
Ambient temp 25C,idle


This post has been edited by stasio: Jan 5 2008, 09:53 PM

Maybe you can share what is the "cooling mod"?

nice proc you got there

will share some of my pics later..

1. i lapped my ThermalRight Extreme
2. Add a 14cm fan intake
3. use Push and Pull (2 x 12cm fan) for CPU heat sink
4. use MX-2 Compound
5. lower Vcore

so u are like this right?

14cm intake go to first 12cm of ur extreme then pull by another 12cm on extreme then exhaust out with 12cm again?

Hi guys, do u believe that when i set my vcore to 1.325v oc to 3.2g quad prime stable for more than 8 hours but my temp range from 60-69c, then when i set to 1.275 oc 3.2g orthos plus run aquamark at the same time also stable my temp range from 59-63c, later i play coh for few hours without any problem too, but of course i cant quad prime. My question, whether you guys will set your voltage at 1.325 or 1.275 if its your pc. Since our daily use doesnt use much of quad core what if i say i set the vcore at 1.275v. Any commend of remarks please. TQ

This post has been edited by Dickong: Jan 6 2008, 10:55 AM

CPU-Z 1.43
HERE
Everest Ultimate Edition v.4.20.1241(registred)
HERE

This post has been edited by stasio: Jan 7 2008, 04:43 AM

1.325v seems normal leww, Y bother reduce the vcore since u still under recommended voltage??, in fact it doesnt hot while primming..

i set mine 1.50v, would undervolt to 1.46v like that..

Problem is temp touching 70c when set at 1.325v, moreover,at 1.275v everything seem ok except i cant quad prime. Thats why i need recommendation from our ocer bro.

This post has been edited by Dickong: Jan 6 2008, 05:22 PM

70c did u really touch the HSf?
sometimes software provide wrong temp. reading
try touch the HSf & wheter its really hot or just warm..

When i touch the heatpipe n the heatsink base, just little warm, but core temp show otherwise, but my ram n nb when touch it really hot.

then no big deal what?
software cant be trusted always, but it is still good as reference

Problem is that even everst show the same reading as core temp, can it be my mobo sensor gone kuku, by the way what software u use to detect temp.

This post has been edited by Dickong: Jan 6 2008, 06:05 PM

u asking me arr? i use only uguru & by touching the HSf when priming
mostly the temp showing higher but when i touch the HSf, just warm

everest showing the same temp coz it get the temp. value same from the sensor where core temp does..

well if 1.275 u can play game without crashes why not? u get lower temperature....

mine is about the same, i can play games and do everything fine, just cannot prime without higher voltage pump........ so i left it a lower for lower temp for daily use, since i dun get crashes or any bsod....

i will upload some pics later !!!
definately cooler than before !!!!!!

my latest temp now at 3.6Ghz !!!

IDLE = 34C
LOAD = 57C

hey guys, i'm curious, CoreTemp reports my Q6600 G0 temp around 45C at idle @ stock speed, is this normal? ambient temp is 30C.

even at load the temps just increase to about 47C, sorry i'm kinda a noob in this.

i want to OC my proc to at least 3.6 soon, so wanna makesure 1st.

you using xigmatek s1283?
my idle is 38C, fulload 68C, system temp 33C
same cooler with tuniq x2, 1.52 vcore.

hmm, after testing with prime my full load goes up to 56C only at stock speed.

and yes, using S1283 with MX-2

At 1.52 vcore with full load 68c only really admire you guys, me at 3.2g 1.325 vcore quad prime full load touching 70c. How did you manage that, Is it wc