what did u do to get 3.4ghz? i only managed to oc to 2.88ghz....

dante18, pump voltage that all........ most mobo nowadays does not need much tweaking to get q6600 to 3.2 ghz.......a slight increament can get u there

VT-ten, that temperature is abnormal for stock speed if not mistaken, need some members to confirm that... i remember mine only hovering around 30oC ++ for all 4 cores.

so far usually i only test the system for orthos to complete the cycle ( i also dunno how long hehe, but normally i see it runs for 1 hr then ok for me already)... so far in supremecommander it never crash on me, so no problem for me. Previously i was having some bottleneck at 3.0ghz, the game is slide show; but after pumping to 3.33 problem solved......

err.. 12hrs?, i dont have much fRee time just to stress until 12hrs
need to play game as well, watch some movie & surfing etc

but if u got much much fRee time, then its ur call

Ya lor, 12 hours too long. I only did 3 hours top.

sleep time i let it run..wake up go eat breakfast etc and then wait a while all done....btw prime i stil can surf web and movie except for gaming..btw no one is need to follow the way i do...is ur call like u say and yes i have lots of fRee time currently

like this?? so i change the CPU voltage control? Because i tried a few times but pc keep restart....cant even go into windows. But if i choose system voltage control to Auto...then can oc to 2.88ghz only.

what mobo u using listing out the spec are easier for others to guide u....

btw u should set the memory multiplier too, (i dunno how does ur bios work)

my full spec is here...pls guide me

1) Intel Core 2 Dua Quad6600
2) Gigabyte P35-Ds3 Mainboard
3)Kington Hyper X PC6400 2GB DDR2-800mhz
4) Seagate 320GB SATA 2
5)Galaxy 8800GTS 512 MN DDR3 256bit
6)Cooler master Real power 620watts Modular

^could u edit ur image(s), very large la bro
make em lil small

TQ

vcore 1.225 ... tak cukup makan leehh .. how to push the proc higher ??
i was told set to auto oso there is a limit the auto vcore will go to .. safety feature i think .. so cannot go any higher liauu the clock .. same thing happened to me ..
can try lowering the multiplier to 8x and set CPU host frequency higher on AUTO vcore if u do not wanna play with vcore 1st to clock higher ..

anyone else can give me some tip to get 3.2ghz on my q6600. my full spec is:

1) Intel Core 2 Dua Quad6600
2) Gigabyte P35-Ds3 Mainboard
3)Kington Hyper X PC6400 2GB DDR2-800mhz
4) Seagate 320GB SATA 2
5)Galaxy 8800GTS 512 MN DDR3 256bit
6)Cooler master Real power 620watts Modula

should be a piece of cake.
i expect you can oc to 3.0ghz with default vcore.

Duh!
It's super easy.

Set the bus speed to 400MHz, Multiplier to 8, vcore, set the vcore to 1.31Volts, FSB:Dram ratio put to 1:1, there, you're done.

This post has been edited by sHawTY: Dec 21 2007, 06:29 PM

yeah...manage to stable at 3ghz...and try to get more. Btw thx for the advices.

all c2d can break 3ghz

got it to 3.4ghz stable now.

cun, have u try stress it??

ya..i used OCCT.

sometimes occt is not accurate to judge the oc is stable.
i tried once occt stable for 30 minutes but failed in prime for 10 minutes.

im havent yet using OCCT
from what i heard, OCCT only stress cpu while prime/ orthos can stress both cpu & RAM at once(depend on user' input)