macam mana nak OC Q6600@4ghz?.. ???mhz X 9X
Cpu vcore nak letak berapa?

445x9
500x8
570x7
667x6

= 4ghz

vcore needed.. usually 1.6v and above... good chips require lesser.. bad chips require more

my advice is reach for the sky 1st before the the star.

try 3.6ghz 1st and see whether the temp is goo enough then go for broke.

nice phrase man

thanks you.

thats what a good sleep gives u.

maybe u should quote that

hahaha... sadly it didnt reach top 3 phrase in my list

dang.

back to the topic.
usually a 3ghz overclock doesnt need a raise in vcore rite.

usually yeah... unless the proc is so bad they need a vcore bump

mine can go further than 3ghz, at an even lower vcore than stock vcore

interesting.

i never try undervolting.
like to but the mobo im in now sucketh to the max.

Hi Can you guys tell me if theres anything wrong with my settings. newbie here.

The CPUid doesnt seem to be showing my overclocked values as you can see in the Core Temp prog.
Since I wasnt sure how to get 1:1 ratio...i left it to 2:3. Should I be mending anything?
Is the temp normal or too high? Should i lower my vcore?

Sorry. Totally clueless. Im just hoping to oc it to 3.2ghz


Thanks for the help

This post has been edited by lozerien: Mar 25 2009, 01:47 AM


Attached thumbnail(s)

thats because of EIST.

it lower the multiplier when the proc isnt on load.

and the proc is running at an overclocked setting.

Thanks. Does my Memory setting looks ok? Are there any unusual readings?



This post has been edited by lozerien: Mar 25 2009, 02:02 AM

yes.
when u running a program or game it'll run at 3.2ghz.

bout the bios setting im not sure as i never use those board but if u tell me what ram are u using it might help.
rite now the ram is running at 1066mhz.

Morning Hilmi, Im using 2 x Crucial Ballistix 2x2Gb DDR2 800 Ram. Any suggestion?

i think that current setting is good as the Ballistix wont have problem running at 1066.

unless u wanna run it at lower speed then u have to change the multiplier.

4Ghz on WC set ups also very hard to reach, and urs somemore is only on air. I`ll bet it`ll just max out at 3.6-3.7

Depends, mine needs to be raised to 1.3, cant leave it on auto,

I thought stock core for the q6600 is 1.325?

not all q6600 batch give same stock vcore ler... some are lower, some are higher... some just 1.2v, some 1.325v... of cos 1.325 is pretty high, though in most cases 1.325 is overkill vcore, and u can usually set it lower to run at stock speed @ 2.4ghz

Hmm, perhaps should overclock my Intel Q6600 too after take back from workshop. Overclockers need liquid cooling system installed right?

a good air cooler is enough.