IBenQ, ur Q6600 really can go above 4GHz? Mine only maxes out at 3.93GHz on an Astek LCLC

Urs B3 stepping is it? Mine(GO) cannot get stability above 3.93

Toyed with an Astek LCLC frm my friend for a month, then back to 3.6 on my cps9700

, so ur 4390MHz not stable is it?

5.4GHz in bios? What CPU? q6600 kah? I doubt it can boot

Unlink the freq ratio for CPU to RAM.

My KVR limit is only 857, so for me to go higher freqs with my Q6600, I disable the link

---

Added on February 1, 2009, 12:32 pmUnlink the freq ratio for CPU to RAM.

My KVR limit is only 857, so for me to go higher freqs with my Q6600, I disable the link

This post has been edited by shaun3230: Feb 1 2009, 12:32 PM

is that idle or load? Cause if its idle, its real hot. Mine is less than 40c, aorund 36-38c idle

Ok, wow, thats low for a load. U can push some more for higher freqs

I pumped out 1.6v on a WC set up last time...

Thats hot... Got apply tp? My stock coolers at 3 idles 38c

4Ghz on WC set ups also very hard to reach, and urs somemore is only on air. I`ll bet it`ll just max out at 3.6-3.7

Depends, mine needs to be raised to 1.3, cant leave it on auto,

MInes around 1.2v at 2.4 when left to auto

A high end air will also do...

QUite ok what.. Mine was like 1.3-1.32 for 3GHz last time

Whats ur temp with it at 3.15?

Sometimes it is not optimal for teh proc to run at that speed. Why dont u try 3.2? Anyway, my optimal one is 3.11 Ghz, 1.35, P95 stable

Price is also a factor, since the 9700 is cheaper..

Still, my 9700 can take me to 3.6 with ease

1:1 is recommended? Well for me, I just leave it unlinked and oc the freq seperately