1. if ur proc can be stable under 1.35, y not... mine 1.272v @ 3.2ghz

3 (should be no.2). duno, but defnitely will reduce lifespan... if can last for 8 years, it might be 5 years n so on... my advice is, just oc it if u need it... even 3 years is a long time to collect money n get a new proc

kenot..
tried to set to 1.325V, caused me BSOD.
means I cant go lower than my current v? (1.34)
Now is 1.3438V, so far so good.

Lately I got BSOD ...50 ~ page fault in non pages area.
is this caused by my RAM?
----
but im abit scare of my temp:
+-67C..
is this too high for core temp?
running multiple pages, played spore for +-30minutes.
im using stock cooler and heatsink.
OCed Q6600 2.4GHz 1066FSB to 3.0GHz 1333FSB.

This post has been edited by sagittaru: Dec 11 2008, 11:53 AM


Attached thumbnail(s)

It won't really decrease lifespan lor

page fault in non paged area , highly likely ram is the cause

67c at 1.34v is as expected from stock cooler ler... but i c ur vid is same as my previous q6600 lor (1.3000VID), how come not stable even at 3ghz? wat mobo u using??

this morning when I tried to turn my pc on, bsod after vista load...80, and then 2nd time page fault again..
last nite it was ok, i tried to run memory stability test also.. passed all..
ive changed my timing to 5-5-5-15-2t from 5-5-5-12-2t, same 2.1v. (does it matter?)
then the problem disappears.
mobo: nForce 680i SLI (122-CK-NF68-AR).
ram: http://www.newegg.com/Product/Product.aspx...N82E16820145034

blur

i wonder how reducing timing solves ur prob =.="

what do u mean BSOD when loading vista, 80?
u mean ur proc @ 80c? @@@

Guys, my q6600 running at 3.2ghz now but the core temp will rise to 69c. Is that still acceptable? Wads the max temp i should let my core reach?

prefer dun go over 70... but for me, danger level is 75c

sry i meant bsod 0x000000080.
After vista finished load, BSOD..
Currently I've downclocked my cpu and my ram, not sure how to make it stable xD

im not sure either, i think sometimes it gets through windows mode, sometimes doesnt.
maybe just happen after i changed my timing then it get through without bsod.

is that intel stock fan/heatsink?
mine is around 63-71 when i put 3.0ghz
withour oc is around 55-65
isnt it too big gap in between?



---

so basically, i've experienced 2 bsods after OC, 0x000000080 and page_fault_blablabla

This post has been edited by sagittaru: Dec 13 2008, 11:15 AM

Not stock fan wor. Using a zalman CNPS9700. My hs is unlapped lar.

my stock VID is 1.304 and the temperature is around 52-55 without OC.
i'm using aftermarket cooling but still got hot and hot,sometime it can reach 64C,hoo...so wory to OC.

decrease only if u find the decreased voltage stable.IBT 100 rounds.slowly test
u see some of us clock 3.0 at 1.2 v like dat coz we using different mobo. and u're using Nvidia 680i chipset which is not a good OCer chipset especially for quads.need better clocker for SLI solution need use 780i chipset.my old P4 also heavily overvolted and it lasted 6 years and still running. btw, if ur proc died within 3 years, u can go claim warranty from intel provided tht no burnt mark on ur proc.it rarely happens unless u use 1.8V or above on ur proc.

latest temp updated .... max temp is during linx using 1536mb of ram, min temp is when full idle ... vcore is stock (since ppl said VID = stock vcore, and my VID is 1.3000)... temp u c is during prime95 test, and i believe prime95 resembles more to real life performance than linx, since this linx is hardcore cpu stresser =.="

give comment if its good enuf, or its just average T_T

ps: got back my mobo asus p5k pro... buyer no time wait for shipping, call off the deal... who interested can contact me

This post has been edited by iBenQ: Dec 14 2008, 03:51 AM


Attached thumbnail(s)

@iBenQ,
wat the mobo u using now with ur q6600.

asus p5k pro lor... dats da oni lga775 mobo i have now >"<

I tried alrd ....running 3.6ghz
1.4V G0 Stepping Q6600

4gb ram 2gbx2 Kingston 800mhz..
Gigabyte EP45-DS3

Trying to reach 3.75ghz or 4.0 i get bsod
anyone have any idea? i tried to raise to 1.45V still bsod when reach windows that place is it possible that my rams cant take 1000mhz? or smth help! thx
my FSB : DRAM is 1:1

tested

experienced bsods after OC, 0x000000080 and page_fault stuff >_> when higher than 3.6ghz
im using value rams though

Full Load Temperature around 50-53C , 50-53C , 43-45C , 45-47C
Idle Temperature around 35-37C , 35-37C , 28-30C , 35-37C
tCooled with IFX-14 >_>



Voltage : 1.325V (In bios)
Going to try 3.6ghz and 1.4V temperature @@

This post has been edited by availyboy: Dec 14 2008, 06:23 PM

Wow ... I can reach 3.6GHz (400x9) at 1.42V(in bios) , a bit higher than you

At least can manage to complete 3Dmark06 and scored 20K 3dmarks

Wah your Motherboard is GA-X48-DQ6 that is 2x PCIE 16x 2.0 -.-
mine brought down to 8x 2.0 x2 only
btw 20k marks? =.= kidding me or wat...so its about improvement of 2k ah for me if i get 16x 2.0 =.=
hmm...crucial ballistix 1066mhz rams should be ok though
btw nice OC
2GB version shud be higher @@
im getting 19k in 3DMARK06

This post has been edited by availyboy: Dec 15 2008, 02:04 AM

GUys Q6600 at 2.8 is there a significant increase in terms of performance? At 3.2Ghz do you gain a lot more compared to 2.8?

of course -______-