Core 2 Quad 6600 Kentsfield 2.4GHz 1066FSB
http://www.newegg.com/Product/Product.aspx...N82E16819115017

OCed to:
Clock: 3.00GHz
FSB: 1333
Vcore: 1.35
Temp: 55C-62C w/ stock fan/cooler
----------------------
Qs:
1. Should I decrease my CPU voltage to 1.325 or 1.3? Or others?
Since I've seen you guys running OCed 3.0GHz @ lower than 1.35V.

3. How long will my CPU last if I overclock like this and use it daily basis?
-----------------------

*This is the 1st time I am doing overclock

This post has been edited by sagittaru: Dec 11 2008, 04:05 AM


Attached thumbnail(s)

kenot..
tried to set to 1.325V, caused me BSOD.
means I cant go lower than my current v? (1.34)
Now is 1.3438V, so far so good.

Lately I got BSOD ...50 ~ page fault in non pages area.
is this caused by my RAM?
----
but im abit scare of my temp:
+-67C..
is this too high for core temp?
running multiple pages, played spore for +-30minutes.
im using stock cooler and heatsink.
OCed Q6600 2.4GHz 1066FSB to 3.0GHz 1333FSB.

This post has been edited by sagittaru: Dec 11 2008, 11:53 AM


Attached thumbnail(s)

this morning when I tried to turn my pc on, bsod after vista load...80, and then 2nd time page fault again..
last nite it was ok, i tried to run memory stability test also.. passed all..
ive changed my timing to 5-5-5-15-2t from 5-5-5-12-2t, same 2.1v. (does it matter?)
then the problem disappears.
mobo: nForce 680i SLI (122-CK-NF68-AR).
ram: http://www.newegg.com/Product/Product.aspx...N82E16820145034

sry i meant bsod 0x000000080.
After vista finished load, BSOD..
Currently I've downclocked my cpu and my ram, not sure how to make it stable xD

im not sure either, i think sometimes it gets through windows mode, sometimes doesnt.
maybe just happen after i changed my timing then it get through without bsod.

is that intel stock fan/heatsink?
mine is around 63-71 when i put 3.0ghz
withour oc is around 55-65
isnt it too big gap in between?



---

so basically, i've experienced 2 bsods after OC, 0x000000080 and page_fault_blablabla

This post has been edited by sagittaru: Dec 13 2008, 11:15 AM