no longer using stock hsf ... me using cm z600 with 2 fans for push n pull config... temp @ 1.616v load not sure but idle is around 45~49c core temp, ok oso ma this temp >"<... but keep blue screen when trying to benchmark T_T...

so i think for cooling system i got it ok, but jz oc settings T_T

@ 4ghz my ram is 890mhz, so i put to just 2.00vdimm, as for gtl ref, my cpu gtl ref tweak only got 0.63,0.61,0.57,0.51 T_T... but for nb gtl ref got 0.67 and 0.61... so which gtl ref shud i use? @@

as for vcore, i set in bios 1.65v but vdroop make it 1.616v... any higher i will get cpu over voltage error warning, so i dun dare go higher T_T

Its possible, but its hard to near impossible to clock those quaddies with air cooling bro.

Mine, watercooled also 100% load with LinX gives me 90c @ 3.8ghz with 1.625v. What do you think air cooling temp would be ?

1.625v

24/7 also 1.625v??

-pWs-

This post has been edited by -pWs-: Nov 18 2008, 04:12 AM

Guys ! im back !!!



lapped to 2000grit !!! Mirror Finish !!!

sit tight there little bro !


HSF + Fan Config !!!

This post has been edited by cscheat: Nov 18 2008, 08:56 AM

No la, daily 3.6ghz @ 1.475v load around 65c, 3.8ghz @ 1.625v folding load around 75c lol

What the temp diff ?

after putting the hsf,what temp do u get?

guys, temp diff between lap and no lap is around 5C !!!

now waiting sometime for the thermal paste material to "break in"...

hope will achieve lower temp !!!

planning to change to intel paltform.. but havent decide yet between E series and Q6600... i'm in gaming and OC.. which better?

how fast u setting ur fan at ?? crazy hehe.......

may be i should lap my q6600 also ...........

5c

Which thermal paste did you use ?

guys, wanna ask smthing, i manage to get my q6600 to 3.6 with vcore 1.345v , idle temp is 50C and prime test is around 70C is it ok? im planning on using it for 24/7

wohh... nice vcore... mine @ 3.6ghz is 1.445v.. but judging from ur temp, u using stock hsf??

nop, im using coolermaster hyper 212, just worry if the temp are to high..

Nice vcore and temp, stable with LinX or IBT ?

what is linx and ibt? sry im new in ocing,1st time oced my Q6600 yesterday and hit 3.6 with the p5q pro,i only test it with prime95 and no prblems for an hour. but the temp getting 75 smthing..

hmmm.. temp a lil high for me... 1.345 vcore shud not get 70c on stress test IMO... shud be 60+ since u not using stock hsf... mine 1.45v stress test core temp stucked at 70c too...

linx n ibt are stress tests to c if ur system is stable at ur oc settings just like prime test, but temps go higher >"<

but with dat temp u can still use it 24/7, just like wat im doing now... wat more ur vcore lower than mine by 0.1++ @@... how u tweak T_T

This post has been edited by iBenQ: Nov 23 2008, 05:14 AM

i set the FSB:DRAM to 1:1, FSB termination 1.4, Nb:1.36 Sb:1.2 Sata:1.5. thats all, i think i might push it further more..
ill try to do the linx n ibt test to see if it stable or not

---

Added on November 23, 2008, 8:09 amok just now i started the IBT test with the max stress and the temp went to 80C
then i stop the test immediately. why so hot?

---

Added on November 23, 2008, 8:25 amok, now my temp getting around 80C with the IBT and LinX, is it normal ? or my temp too high?

---

Added on November 23, 2008, 8:36 amthen i switch to the default setting, @2.4ghz temp is 60C only while ibt and linx.

---

Added on November 23, 2008, 8:54 am
this is what i get on fsb 400X9 vcore 1.35

is it my heatsink fan problem ?

This post has been edited by hobby69: Nov 23 2008, 08:54 AM

@hooby69,should be ok one,don't worry.Your chip quite good lor,very very good.AFAIK,lower vcore high speed chip should run hotter but don't quote me on that.

LinX stable 10 loops at 400X9 vcore 1.35 ?

Guys, just lap my true, but discover my 6600 quad is concave wtf, initially though my true is concave, since the quad is concave i need to lap my quad but hestitate becos warranty might be void, question is i need opinion if this is your quad will u lap it. TQ