guys, wanna ask smthing, i manage to get my q6600 to 3.6 with vcore 1.345v , idle temp is 50C and prime test is around 70C is it ok? im planning on using it for 24/7

nop, im using coolermaster hyper 212, just worry if the temp are to high..

what is linx and ibt? sry im new in ocing,1st time oced my Q6600 yesterday and hit 3.6 with the p5q pro,i only test it with prime95 and no prblems for an hour. but the temp getting 75 smthing..

i set the FSB:DRAM to 1:1, FSB termination 1.4, Nb:1.36 Sb:1.2 Sata:1.5. thats all, i think i might push it further more..
ill try to do the linx n ibt test to see if it stable or not

---

Added on November 23, 2008, 8:09 amok just now i started the IBT test with the max stress and the temp went to 80C
then i stop the test immediately. why so hot?

---

Added on November 23, 2008, 8:25 amok, now my temp getting around 80C with the IBT and LinX, is it normal ? or my temp too high?

---

Added on November 23, 2008, 8:36 amthen i switch to the default setting, @2.4ghz temp is 60C only while ibt and linx.

---

Added on November 23, 2008, 8:54 am
this is what i get on fsb 400X9 vcore 1.35

is it my heatsink fan problem ?

This post has been edited by hobby69: Nov 23 2008, 08:54 AM

ok i run the linX and it only stable for about 4 loops and the temperature hit 90C before the comp auto restart
but it stable with the prime95 for 2 hours with average temp 75C . I dont know which couse the restart, voltage not ungh or temp to high ?

ok here it is.
10 loops of linx and it still stable with a 90C,but the temp getting 90C max, im afraid it gonna burn my processor, but i usually get 60-65C on load while playing games 24/7. Guys, should i lower my FSB ? or is it ok with this setting ?




This post has been edited by hobby69: Nov 23 2008, 08:40 PM

thnks