Ok.... 1stly I will set da vdimm.... n my BIOS belum update.... Still da same when i got my MoBo... 3 days ago....
2nd, I cannot set lower anymore.... dats da max already..... But dun wori, i will recheck n do all da followings steps u mentioned....

@rozz
be prepared for a sweet boot . I am here waiting for your response of your effort

hey all bro, ip35-e or msi neo2-fr better ?

OIC, and i was overreacting..LOL...

So, is it normal for 0.94.5 to show my M0 to have a Tjunc at 85c?

Besides, check everything today and it seems they are back to normal. 34c at idle seems very realistic to me now...

-------
About Vcore, i might try to pump it over 3Ghz tonight (if i have the time). May i know, should i go slowly with the Vcore or i could just pump it up as long as it does not exceed 1.5V?

Last time when i did 380 * 8, it booted but BSOD after that..LOL...

However, i did that at a 1:1 ratio and my ram setting is at DDR1053 4-4-4-12 though. Should i make the timing looser?

IP35E,have used quite some and is reliable and a good ocer.MSI have reputation of always RMA so think carefully.

I m not so sure.... I think IP35 ok laa..... Using it rite now wit gud OC abilities.... Juz dat my proc cannot.... N beside its quite cheap.....

that's correct, i got a MSI motherboard and have trouble getting my warranty with the dealer. It broke down after a year i bought it, the warranty card states that I have 3 years warranty but i couldnt get the 3 years warranty as the dealer refuse to deal with my warranty unless i pay them RM80.

whereas i got another Abit motherboard, overclocked and used for over 2 years and it is still alive and kicking well. therefore, im going to get the IP35-E, cost only RM310. never ever buy MSI products anymore.

Bout ur Abit IP35-E, try hunt 4 lower price.... I got mine 4 RM295 only... If u 1 2 know more PM me...

Hehe... My new OC results, passed OCCT 1 hour test

Intel Pentium E2140
Revision: L2
EIST: Enabled
C1E: Enabled
CPU Clock: 3120MHz
Core Voltage: Stock

my e2140 tjunc is 100 with coretemp...care to explain guys...

Wah,so cheap.Get from distributor also same price. Dreamworks,nice E2140 you got there.

hahaha....lol @Dreamworks, not bad u manage 2 run it on stock Vcore. I bet u its not very hot...

I got my proc from kucing, cheap and good Load is around 55C - 58C with OCCT running, temperature is not stable though... Dunno why

Just tested with FSB set to 395MHz, failed OCCT after 40 minutes of stress testing. Seems like I'll be stuck at 3120MHz if I want to keep stock voltage so EIST and C1E would work

This post has been edited by Dreamworks: Jan 21 2008, 11:53 PM

Get the latest version of Coretemp where they fix the Tjunction back to 85.

there goes your warranty. don come back to me

btw here's mine, stil working on to get it prime stable. urrghh probably the temp is killing it off already or rather Gemin cant take tat much
Claw....mayday, IFX 14 needed


This post has been edited by kucingfight: Jan 22 2008, 02:06 PM


Attached thumbnail(s)

already dloaded 0.96.1...no difference...

Yeahoo..... I did another stress test for 15hour n 40mins.... Left it overnite, when 2 skol.... Came back n its still alive.... So now, i dare 2 take da risk 2 OC @3.2 400x8



No problems detected in 17835232 iterations, bye!
StressCPU ran 15 hours, 41 minutes 8 seconds.
Execution halted.

Here, I copy n paste 4rom Orthos

But 1 thing i pelik How come now da temp is at 53-55c @ full load??? B4 this is wuz 60-63c.... same speed... C my previous post got.... http://forum.lowyat.net/index.php?showtopi...post&p=15228953






This post has been edited by rozz_1291: Jan 22 2008, 03:09 PM

nice dude...care to share with us ur settings...

This is normal from sellers out there. Most of them ONLY covers 1 year warranty even though the product have 3 years. The next 2 years, you will need to warranty it by going to distributor yourself...

Well, the same thing happened to me as well. My M0 is showing Tjunc to be at 85c at 0.95.4 while at 0.96.1, its showing Tjunc to be at 100. I remember someone saying that M0 will have 100c as Tjunc while L2 is 85c.

So, iman_210, whats your stepping?

@rozz
so my idea worked or not?