Thanks alot there kucingfight.

Redownloaded the CoreTemp 0.95.4 just now and its now showing idle temperature at 39c as compared to the 53c shown at 0.96.1.

Hopefully, this is the correct temperature..LOL..

@aka
bro there is a newer one out now. Its coretemp 0.96. Its the latest. Get it.

After looking at cats post i retract this and yes agreed get 0.95.4 just tested 0.96, not much difference but hmm

This post has been edited by a1098113: Jan 20 2008, 10:32 PM

LOL, at least the lower figure gives u a better feeling.

But logically on idle, it should be 39C, at least not until 53C . You can always finger test the hsf and the area around it.

Well, i am using it previously - the newest CoreTemp and its showing my temperature to be at 53 - 56c at idle at stock which really scares me.

However, when i revert back to the 0.95.4 version, its currently showing me to run at 39c even on 2.4Ghz (300 * 8). Even when i rebooted, my bios temperature reading is showing me roughly the same, at around 37c. So, i guess the older version was more accurate than the newer version though. At least at my case.

Another thing is, the newer 0.96 version is showing my TjMax to be at 100c while the older one is showing 85c though...

LOL..Yea, its at least giving me less heartattack.

Well, i would love to test it a few days first and see whether its still around the same or not. Lets hope the MX-2 will be better after curing..LOL...

Thanks for the guidance there..

This post has been edited by akachester: Jan 20 2008, 10:39 PM

ya, 0.96 also scare me off, glad tht u solved ur problem...

Tjunc for L2 = 85C , M0 is 100C. it's perfectly normal.

@kucing

teach me how u OC la, me noob la bro Only 3.4Ghz so sad jk jk. yes L2 has a lower Tjunction hehe. Its fun OCing man.

Argh..... Shitx..... I tried OC to 3.2 cannot. 3.15 cannot. 3.10 still cannot.... Guess stuck @3.0 only lor.... It keeps on BSOD n i think i've damage sumthing.... Bcuz @3.0 is slower than b4... Sumtime hangs ........ Lol.... Y cannot OC higher??? Izzit bcuz i hit da wall already ar??? Now @ 300mhzX10..... I've notice if my rams hit 667 n above, always get BSOD......

Here is my specs i manage 2 reach:
3.0@1.35v
Rams DDR610mhz @1.80v


Y.................................................





This post has been edited by rozz_1291: Jan 20 2008, 11:13 PM

@rozz
so sad! jk. You ni kena play with Vcore la, sayang. after 3.0Ghz u have to up your Vcore. No pain no gain for top speeds. Do you know what Vcore i am running on? 1.50V for my 3.44Ghz.

This is where experience counts aite. Learn slowly.

Yup dat wat i did already..... 3.20@1.37v but still cannot.... Izzit bcuz VDimm hav 2 increase also???

N i think i know y my pc is slow, in CPU-Z i notice it stated 1800mhz core speed. n da multiplier @ x6..... But i dunno y sumtimes in naik n turun..... If at x10, core speed @ 3000mhz..... Y ar????

LOL, think i cant teach u more since ur OC speed already exceeded mine . having fun with ur 'secret' 2x1gb DDR2 rams eh.

The E2180 generally has lower OC capability then E2140/2160. Don ask me why i do not know aso.

Your RAM speed @ DDR2 1230? that's way too high man, try 1:1 ratio. It could be hampering your OC. Set your ram to 5-6-6-18 first. This is to eliminate the ram speed factor.

Go to the bios, disable all the 'rubbish' CPU function eg EIST, C1E and etc ( i cant remember em)

Noticed ur on STOCK hsf, so don expect much over 3ghz. @ the speed, the temp is already killing the stock hsf

This post has been edited by kucingfight: Jan 20 2008, 11:28 PM

@rozz

Ok. now i can help you, you have the same board like me

Do this.

1.38..V- 3.20Ghz

play 1:1 man like what kucing said. U cant do it with IP35e. I know this board with my fingertips, i live and sleep with it. literally.

---

Added on January 20, 2008, 11:33 pm@kucing

yes yes those secret rams can do a nonstable 1000Mhz with cl4 lol. Nice eh. Its your stuff man, if u know what i mean Bryan.. is my close friend

@rozz
Another advice, get better hsf, and what i am giving you is basically about 2 hours hours worth of playing on the right Vcore for my e2140. Should be the same for you.

This post has been edited by a1098113: Jan 20 2008, 11:33 PM

@kucingfight

Aaa.... finally da OC master is here..... 1stly, my rams is @610mhz. Sori, but i dun undrstnd wat u mean by DDR2 1230 hahaha lol.... N my HSF is stock intel wan.... Still waiting 4 my WC 2 arrive soon.... Izzit sumthing 2 do wit my power??? Like VCore n VDimm not enough???

N, wat does da EIST n C1E u mention juz now do.... Any effect if I disable it???? Tkut terbakar ....hehehe jk jk

---

Added on January 20, 2008, 11:35 pm@a1098113
Ok bro... will try out later.... Maybe 2morow after skol..... Malas now bcuz if crash hav 2 on n off..... Thankx...

This post has been edited by rozz_1291: Jan 20 2008, 11:35 PM

@rozz

This C1E and Eist is just a function Intel gives to alternate the multipliers so you can use less power. In laymans terms. But when u r ocing u can disable it. Like i told u, follow it, it might work. I have the same board like you. It has a Vdroop of -0.02V and when u give full load, there is a further ripple of 0.02V.

1.38V-3.2Ghz.

---

Added on January 20, 2008, 11:44 pm@rozz
try 400*8 instead. and a 1:1 ratio and the voltage at 1.38V, see whether it works.

This post has been edited by a1098113: Jan 20 2008, 11:44 PM

Waa..... 400x8 ar....wait, let calculate 1st..... 3.20 ok i will try.....But @1.38v, Maybe i will wait 4 my WC 2 arrive 1st lor.... Takut overheat nanti..... Izzit ok??? if ok then i will try it out.... addicted 2 OCing already....

But as kucingfight said, maybe E2180 cannot OC dat high....

@rozz
1.38V is nothing man. PLay with 3.52Ghz at 1.56V lol. Using e2140

Ok2... juz hope nothing gets fried hahaha..... N i c u hav mastered da IP35-E already..... fuh... luckily we hav da same board

@rozz
i am still noob la bro. learning all the time. Yeah we can share notes. Hmm, i would not suggest a stress test just yet for your 3.2Ghz clock. Just have a slap at 1.38V see whether can. Coz this board is like that.
But maybe the E2180 has limits, but hey, never know till we try. The limit of Vcore i suggest with 3.2Ghz is 1.40V, for stock cooling. Nothing more. If you cant, then its just the proc then. remember 400*8. and 1:1 on Dram:Fsb.

Go go go. Do it now.

Ok got it..... 400x8... But bout da Dram, 1:1. Mine is @ 1:1:2 if i m not mistaken I remember last digit got 2..... Anyway, VCore set to 1.38v ok. How bout VDimm??? 1.80v ok???

set Vdimm at 2.00V or auto if u have. WHat bios version u using, Use BIOS version 11, its the OC bios. Set Vdimm at 2.00V and Vcore at 1.38V..

The ratio should be at 1:1.00 not 1:1.20, coz default is such at 1:1.20
Put it at 1:1.00